8 research outputs found
Effect of Various Parameters on the Solids Holdup in a Liquid-Solid Circulating Fluidized Bed
Phase change material-based building architecture for thermal management in residential and commercial establishments
Efficient and economical technology that can be used to store large amounts of heat or cold in a definite volume is the subject of research for a long time. Thermal storage plays an important role in building energy conservation, which is greatly assisted by the incorporation of latent heat storage (LHS) in building products. LHS in a phase change material (PCM) is very attractive because of its high storage density with small temperature swing. It has been demonstrated that for the development of a latent heat storage system (LHTS) in a building fabric, the choice of the PCM plays an important role in addition to heat transfer mechanism in the PCM. Thermal energy storage in the walls, ceiling and floor of buildings may be enhanced by encapsulating or embedding suitable PCMs within these surfaces. They can either capture solar energy directly or thermal energy through natural convection. Increasing the thermal storage capacity of a building can increase human comfort by decreasing the frequency of internal air temperature swings so that the indoor air temperature is closer to the desired temperature for a longer period of time. This paper aims to gather the information from the earlier works on the developments of PCM's incorporation in building, the problems associated with the selection of PCM and the various methods used to contain them for space heating and cooling applications.Latent heat thermal energy storage Space heating Space cooling Building energy conservation Phase change material Encapsulation
A Model to Predict Radial Solids Holdup and Liquid Velocity Distributions in Liquid-Solid Circulating Fluidized Bed
Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system
The exhaust gas from an internal combustion engine carries away about 30% of the heat of combustion. The energy available in the exit stream of many energy conversion devices goes as waste, if not utilized properly. The major technical constraint that prevents successful implementation of waste heat recovery is due to its intermittent and time mismatched demand and availability of energy. In the present work, a shell and finned tube heat exchanger integrated with an IC engine setup to extract heat from the exhaust gas and a thermal energy storage tank used to store the excess energy available is investigated in detail. A combined sensible and latent heat storage system is designed, fabricated and tested for thermal energy storage using cylindrical phase change material (PCM) capsules. The performance of the engine with and without heat exchanger is evaluated. It is found that nearly 10-15% of fuel power is stored as heat in the combined storage system, which is available at reasonably higher temperature for suitable application. The performance parameters pertaining to the heat exchanger and the storage tank such as amount of heat recovered, heat lost, charging rate, charging efficiency and percentage energy saved are evaluated and reported in this paper.Waste heat recovery Thermal storage Latent heat thermal storage Phase change material Heat recovery heat exchanger Diesel engine exhaust