The effect of the ground plane size and the height on small PIFA

This is the post-print version of the article - Copyright @ ISAP 201

A novel technique to improve gain in transparent UWB antennas

A novel technique to improve the performance of AgHT-8 transparent polymer antennas is proposed in this paper. A spit-ring resonator is introduced on the radiating patch to enhance gain. The resonator basically concentrates the radiating energy to the central area of the patch thus improving gain. The designed antenna demonstrates good gain while maintaining the original transparency of the material. Such an antenna inscribed on the commercially available AgHT-8 sun shielding film material makes it a viable option for wireless applications like in-house base stations and applications requiring fast data rate transfers which can be mounted on windows and glass panels. © 2011 IEEE.Solutia Inc., St. Louis, Missouri, US

A novel technique and soldering method to improve performance of transparent polymer antennas

This article is archived here with permission from IEEE - Copyright @ 2010 IEEEA novel technique and a non-thermal soldering method to improve the performance of AgHT-8 transparent polymer antennas are proposed in this paper. The proposed technique involves the removal of the coating layer at areas on the CPW ground and feed line where the connectors of the coaxial feed or legs of the SMA connectors will be attached, and applying a coat of silver paint on the exposed areas before cold soldering the coaxial connections or SMA connector legs. The non-thermal or cold soldering using electrically conductive paste enables direct soldering of the co-axial feed points or connector legs which cannot otherwise be done with hot or thermal soldering. This type of connection greatly enhances the performance of the AgHT-8 polymer antennas compared to coaxial feed point connections through hot soldered copper pads glued to the surface of the polymer coating. The proposed technique also gives a stronger connection bond than directly cold soldering the feed points or connectors to the smooth surface of the AgHT-8 material. Furthermore, the copper pad connection technique also introduces additional losses contributed by the adhesive properties of the glue used. This proposed novel technique and soldering method may be extended to enhance antenna performance made from other similar transparent conductive polymers like IT

A non-thermal soldering technique to improve polymer based antenna performance

Copyright @ 2010 EuMCA non-thermal soldering technique using cold solder or electrically conductive epoxy for connecting SMA connectors to polymer based antennas is proposed in this paper. The proposed technique prevents damage to the polymer due to the solder iron heat and also the loss of efficiency through the use of indirect connections of the coaxial feed via copper pads glued to the antenna. The direct connection of the feed points via SMA connectors on to a transparent antenna designed on AgHT-8 material has been demonstrated. The method can also be applied to solder the coaxial feed points directly to the antenna instead of using copper pads which will introduce additional reflection losses. The technique involves the use of colder soldering instead of hot soldering so as to not damage the polymer based antenna as well as improve the efficiency of the antenna

The effect of the mutual coupling on small reconfigurable antennas

Copyright @ ISAP 201

Investigative study on the development of a green UWB antenna

Copyright @ 2010 ISA

A Novel Transparent UWB Antenna for Photovoltaic Solar Panel Integration and RF Energy Harvesting

A novel transparent ultra-wideband antenna for photovoltaic solar-panel integration and RF energy harvesting is proposed in this paper. Since the approval by the Federal Communications Committee (FCC) in 2002, much research has been undertaken on UWB technology, especially for wireless communications. However, in the last decade, UWB has also been proposed as a power harvester. In this paper, a transparent cone-top-tapered slot antenna covering the frequency range from 2.2 to 12.1 GHz is designed and fabricated to provide UWB communications whilst integrated onto solar panels as well as harvest electromagnetic waves from free space and convert them into electrical energy. The antenna when sandwiched between an a-Si solar panel and glass is able to demonstrate a quasi omni-directional pattern that is characteristic of a UWB. The antenna when connected to a 2.55-GHz rectifier is able to produce 18-mV dc in free space and 4.4-mV dc on glass for an input power of 10 dBm at a distance of 5 cm. Although the antenna presented in this paper is a UWB antenna, only an operating range of 2.49 to 2.58 GHz for power scavenging is possible due to the limitation of the narrowband rectifier used for the study

Miniature transparent UWB antenna with tunable notch for green wireless applications

Copyright @ 2011 IEEEA miniature transparent UWB antenna with tunable notch that can be incorporated with a solar panel for harnessing solar energy has been proposed and presented. The antenna demonstrates a good omni-directional radiation pattern throughout the FCC bandwidth of 3.1 – 10.6 GHz and a comparable gain making it a good candidate for future green wireless applications

A reconfigurable wideband and multiband antenna using dual-patch elements for compact wireless devices

This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2012 IEEEA reconfigurable wideband and multiband C-Slot patch antenna with dual-patch elements is proposed and studied. It occupies a compact volume of 50 × 50 × 1.57 (3925 mm3), including the ground plane. The antenna can operate in two dual-band modes and a wideband mode from 5 to 7 GHz. Two parallel C-Slots on the patch elements are employed to perturb the surface current paths for excitation of the dual-band and the wideband modes. Two switches, implemented using PIN diodes, are placed on the connecting lines of a simple feed network to the patch elements. Dual-band modes are achieved by switching “ON” either one of the two patch elements, while the wideband mode with an impedance bandwidth of 33.52% is obtained by switching “ON” both patch elements. The frequencies in the dual-band modes can be independently controlled using positions and dimensions of the C-Slots without affecting the wideband mode. The advantage of the proposed antenna is that two dual-band operations and one wideband operation can be achieved using the same dimensions. This overcomes the need for increasing the surface area normally incurred when designing wideband patch antennas. Simulation results are validated experimentally through prototypes. The measured radiation patterns and peak gains show stable responses and are in good agreements. Coupling between the two patch elements plays a major role for achieving the wide bandwidth and the effects of mutual coupling between the patch elements are also studied