Environmental microbiology as related to planetary quarantine Progress report

Research project summaries on spacecraft sterilization and planetary quarantin

Extreme precipitation strengthening in ion-implanted nickel

Precipitation strengthening of nickel was investigated using ion-implantation alloying and nanoindentation testing for particle separations in the nanometer range and volume fractions extending above 10O/O. Ion implantation of either oxygen alone or oxygen plus aluminum at room temperature was shown to produce substantial strengthening in the ion-treated layer, with yield strengths near 5 GPa in both cases. After annealing to 550"C the oxygen-alone layer loses much of the benefit, with its yield strength reduced to 1.2 GP~ but the dual ion-implanted layer retains a substantially enhanced yield strength of over 4 GPa. Examination by transmission electron f microscopy showed very fine dispersions of 1-5 nm diameter NiO and y-A1203 precipitates in the implanted layers before annealing. The heat treatment at 550"C induced ripening of the NiO particles to sizes ranging from 7 to 20 nm, whereas the more stable ~-A1203 precipitates were little changed. The extreme strengthening we observe is in semiquantitative agreement with predictions based on the application of dispersion-hardening theory to these microstructure

Magnetic properties of X-Pt (X=Fe,Co,Ni) alloy systems

We have studied the electronic and magnetic properties of Fe-Pt, Co-Pt and Ni-Pt alloy systems in ordered and disordered phases. The influence of various exchange-correlation functionals on values of equilibrium lattice parameters and magnetic moments in ordered Fe-Pt, Co-Pt and Ni-Pt alloys have been studied using linearized muffin-tin orbital method. The electronic structure calculations for the disordered alloys have been carried out using augmented space recursion technique in the framework of tight binding linearized muffin-tin orbital method. The effect of short range order has also been studied in the disordered phase of these systems. The results show good agreements with available experimental values.Comment: 21 pages, 4 eps figures, accepted for publication in Journal of Physics Condensed Matte

A Re-examination of the Portevin-Le Chatelier Effect in Alloy 718 in Connection with Oxidation-Assisted Intergranular Cracking

In Alloy 718, a sharp transition exists in the fracture path changing from an intergranular brittle mode to a transgranular ductile mode which is associated with a transition of flow behavior from smooth in the dynamic strain aging regime to a serrated one in the Portevin-Le Chatelier (PLC) regime. In order to better understand both deformation and rupture behavior, PLC phenomenon in a precipitation-hardened nickel-base superalloy was carefully investigated in a wide range of temperatures [573 K to 973 K (300°C to 700°C)] and strain rates (109^-5 to 3.2910^-2 s^-1 ). Distinction was made between two PLC domains characterized by different evolutions of the critical strain to the onset of the first serration namely normal and inverse behavior. The apparent activation energies associated with both domains were determined using different methods. Results showed that normal and inverse behavior domains are related to dynamic interaction of dislocations with, respectively, interstitial and substitutional solutes atoms. This analysis confirms that normal PLC regime may be associated to the diffusion of carbon atoms, whereas the substitutional species involves in the inverse regime is discussed with an emphasis on the role of Nb and Mo

High-temperature electrical conductivity of aluminium nitride

The electrical conductivity of hot-pressed polycrystalline aluminium nitride doped with oxygen and beryllium was measured as a function of temperature from 800 to 1200° C and over a range of nitrogen partial pressure from 10 2 to 10 5 Pa. The effect of beryllium dopant, the independence of conductivity from nitrogen partial pressure, and the observed activation energy suggested extrinsic electronic species or aluminium vacancies as charge carriers. Polarization measurements made with one electrode blocking to ionic species indicated that the aluminium nitride with oxygen impurity was an extrinsic electronic conductor.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44688/1/10853_2005_Article_BF01161209.pd

Thermal effects in high density polyethylene and low density polyethylene at high hydrostatic pressures

The temperature changes as a result of rapid hydrostatic pressure applications are reported for high density polyethylene (HDPE) and low density polyethylene (LDPE) in the reference temperature range from 298 to 423 K and in the pressure range from 13.8 to 200 MN m −2 . The adiabatic temperature changes were found to be a function of pressure and temperature. A curve fitting analysis showed that the empirical curve (∂/∂ P ) = ab (Δ P ) b−1 described the experimental thermoelastic coefficients obtained from the experiments. The data were analyzed by determining the predicted thermoelastic coefficients derived from the Thomson equation (∂/∂ P ) θ = α T 0 /ϱ C p . The experimental and predicted Grüneisen parameter γ T were also determined.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44687/1/10853_2005_Article_BF01132919.pd