21,952 research outputs found
Reoptimization of the Ohio State University radio telescope for the NASA SETI program
The Ohio State University radiotelescope is the second largest radio telescope in the United States, equivalent in collecting area (2200 sq m) to a 175-foot diameter dish. For the past 17 years it has been dedicated fulltime to SETI, and it is now being considered by NASA for selection as the NASA dedicated SETI observatory. The telescope was originally designed, optimized, and used as an all-sky survey instrument to create detailed maps and catalogs of the radio astronomical sky. For the SETI Program, some re-optimizations are required. Right ascension tracking for one to two hours (depending on the declination) was achieved by exploiting the exceptionally large f/d ratio of the telescope. The feed horns were mounted on a large moveable, rubber-tired cart which is capable of a total motion of 100 feet. The cart can carry many horns, making possible simultaneous observations at many sky directions and frequency ranges. Rapid declination movement and its automation will be accomplished through simplification of the existing braking system, and replacement of older mechanical sensors by modern electronic inclinometers and proximity detectors. Circular polarization capability will be achieved through an increase in the number of horizontal wires in the reflector mesh, or addition of a finer mesh on top of the existing one. The telescope has great inherent resistance to radio frequency interference, due to its ground-mounted feed horns and shielding by the large reflectors of half the horizon. The resistance was recently increased further by installation of rolled-edges and diffraction-trapping gratings on the feed horns. If further shielding should be required, inexpensive side shields could be added to the telescope, making it a totally closed structure on all four sides
Project OASIS: The Design of a Signal Detector for the Search for Extraterrestrial Intelligence
An 8 million channel spectrum analyzer (MCSA) was designed the meet to meet the needs of a SETI program. The MCSA puts out a very large data base at very high rates. The development of a device which follows the MCSA, is presented
A design assessment of multiwall, metallic stand-off, and RSI reusable thermal protection systems including space shuttle application
The design and assessment of reusable surface insulation (RSI), metallic stand off and multiwall thermal protection systems (TPS) is discussed. Multiwall TPS is described in some detail, and analyses useful for design of multiwall are included. Results indicate that multiwall has the potential to satisfy the TPS design goals better than the other systems. The total mass of the stand-off TPS and of the metallic systems require less primary structure mass than the RSI system, since the nonbuckling skin criteria required for RSI may be removed. Continued development of multiwall TPS is required to verify its potential and to provide the necessary data base for design
Signal enhancement of the in-plane and out-of-plane Rayleigh wave components
Several groups have reported an enhancement of the ultrasonic Rayleigh wave when scanning close to a surface-breaking defect in a metal sample. This enhancement may be explained as an interference effect where the waves passing directly between source and receiver interfere with those waves reflected back from the defect. We present finite element models of the predicted enhancement when approaching a defect, along with experiments performed using electromagnetic acoustic transducers sensitive to either in-plane or out-of-plane motion. A larger enhancement of the in-plane motion than the out-of-plane motion is observed and can be explained by considering ultrasonic reflections and mode conversion at the defect
Higher Spin BRS Cohomology of Supersymmetric Chiral Matter in D=4
We examine the BRS cohomology of chiral matter in , supersymmetry
to determine a general form of composite superfield operators which can suffer
from supersymmetry anomalies. Composite superfield operators \Y_{(a,b)} are
products of the elementary chiral superfields and \ov S and the
derivative operators D_\a, \ov D_{\dot \b} and \pa_{\a \dot \b}. Such
superfields \Y_{(a,b)} can be chosen to have `' symmetrized undotted
indices \a_i and `' symmetrized dotted indices \dot \b_j. The result
derived here is that each composite superfield \Y_{(a,b)} is subject to
potential supersymmetry anomalies if is an odd number, which means that
\Y_{(a,b)} is a fermionic superfield.Comment: 15 pages, CPT-TAMU-20/9
Phased electromagnetic acoustic transducer array for Rayleigh wave surface defect detection
A phased electromagnetic acoustic transducer (EMAT) array system has been developed for detection and characterisation of surface breaking defects. An array of four linear coils which are individually controlled are used to generate a Rayleigh wave. The high current electronics combined with the coil designs enables the array to generate either narrowband or broadband signals, and controlling the phase delay between the channels makes it possible to change the ultrasound wavelength without requiring the physical separation of the coils to be changed. Experimental results show that the four-coil phased array is able to generate a wavelength range from 3.0 mm to 11.7 mm. Surface breaking defects were characterised using a transmit-receive set-up with a broadband EMAT detector being used to detect the Rayleigh wave. Machined surface slots with different depths were used for technique validation. The results show that the array is sensitive to surface defects and that a wide depth sensitivity range for defect sizing can be easily achieved by applying phasing to tune the wavelength of operation. A large increase in detection flexibility is immediately shown
Device and method for frictionally testing materials for ignitability
Test apparatus for determining ignition characteristics of various metal in oxidizer environments simulating operating conditions for materials is invented. The test apparatus has a chamber through which the oxidizing agent flows, and means for mounting a stationary test sample therein, a powered, rotating shaft in the chamber rigidly mounts a second test sample. The shaft is axially movable to bring the samples into frictional engagement and heated to the ignition point. Instrumentation connected to the apparatus provides for observation of temperatures, pressures, loads on and speeds of the rotating shaft, and torques whereby components of stressed oxygen systems can be selected which will avoid accidental fires under working conditions
Imaging Diagnosis – The Computed Tomographic Appearance of a Giant Cell Tumor affecting the mandible in a pygmy goat
- …