Real time tomography at the Swiss light source

The penetrating power of X-rays coupled with the high flux of 3rd generation synchrotron sources makes X-ray tomography to excel among fast imaging methods . To exploit this asset of synchrotron sources is the motivation for setting up an ultra-fast tomography endstation at the TOMCAT beamline. The state of the art instruments at synchrotron sources offer routinely a temporal resolution of tens of seconds in tomography. For a number of applications, for example biomedical studies, the relevant time scales (breathing, heartbeat) are rather in the range of 0.5–2 seconds. To overcome motion artifacts when imaging such systems a new ultra-fast tomographic data acquisition scheme is being developed at the TOMCAT beamline. We can acquire a full set of projections at sub-second timescale in monochromatic or white-beam configuration. We present a feasibility study with the ultimate aim to achieve sub-second temporal resolution in 3D without significant deterioration of the spatial resolution. For the first time, the 3D dynamics of the very early stages of a quickly aging liquid foam can be visualised with high quality and sufficiently large field of view. ©2010 American Institute of Physic

Fast Synchrotron X Ray Tomography of Dynamic Processes in Liquid Aluminium Alloy Foam

Series of fast synchrotron X ray tomographies are taken continuously at a rate of up to 5 Hz, while aluminium alloy precursors are foamed in an X ray transparent setup for several minutes using infrared IR lasers for heating. The entire foaming process from the solid precursor to the expanded liquid foam is captured. The analysis of the sequence of tomographies is done with an emphasis on nucleation and bubble growth. In early stages of foaming, bubble and crack formation and evolution are observed. We analyze the nucleation stage and obtain quantitative results for the number of nucleation centers and their distribution and derive the nucleation rate as a function of tim

Structural formation during bread baking in a combined microwave-convective oven determined by sub-second in-situ synchrotron X-ray microtomography

A new concept has been developed for characterizing the real-time evolution of the three-dimensional pore and lamella microstructure of bread during baking using synchrotron X-ray microtomography (SR\ub5CT). A commercial, combined microwave-convective oven was modified and installed at the TOMCAT synchrotron tomography beamline at the Swiss Light Source (SLS), to capture the 3D dough-to-bread structural development in-situ at the micrometer scale with an acquisition time of 400 ms. This allowed characterization and quantitative comparison of three baking technologies: (1) convective heating, (2) microwave heating, and (3) a combination of convective and microwave heating. A workflow for automatic batchwise image processing and analysis of 3D bread structures (1530 analyzed volumes in total) was established for porosity, individual pore volume, elongation, coordination number and local wall thickness, which allowed for evaluation of the impact of baking technology on the bread structure evolution. The results showed that the porosity, mean pore volume and mean coordination number increase with time and that the mean local cell wall thickness decreases with time. Small and more isolated pores are connecting with larger and already more connected pores as function of time. Clear dependencies are established during the whole baking process between the mean pore volume and porosity, and between the mean local wall thickness and the mean coordination number. This technique opens new opportunities for understanding the mechanisms governing the structural changes during baking and discern the parameters controlling the final bread quality

Micro-Scale Restraint Methodology for Humidity Induced Swelling Investigated by Phase Contrast X-Ray Tomography

A new methodology for restraining the swelling of spruce wood samples in the micrometre range is developed and presented. We show that the restraining device successfully prevents the free swelling of wood during moisture adsorption, thus modifying significantly the anisotropy of swelling and provoking the intended collapse and large deformations of the wood cells at the edges of the sample in contact with the restraining device. The device consists in a slotted cube designed to restrain swelling and is made of PMMA manufactured by laser ablation. The sample undergoing the restraining experiment is imaged with high-resolution synchrotron radiation phase contrast X-Ray Tomographic Microscopy. The deformation of the restraining device itself is only approximately 2μm with respect to a 500μm width in cubes containing latewood samples and half of that in the case of cubes containing earlywood

Hard X-ray stereographic microscopy for single-shot differential phase imaging

The characterisation of fast phenomena at the microscopic scale is required for the understanding of catastrophic responses of materials to loads and shocks, the processing of materials by optical or mechanical means, the processes involved in many key technologies such as additive manufacturing and microfluidics, and the mixing of fuels in combustion. Such processes are usually stochastic in nature and occur within the opaque interior volumes of materials or samples, with complex dynamics that evolve in all three dimensions at speeds exceeding many meters per second. There is therefore a need for the ability to record three-dimensional X-ray movies of irreversible processes with resolutions of micrometers and frame rates of microseconds. Here we demonstrate a method to achieve this by recording a stereo phase-contrast image pair in a single exposure. The two images are combined computationally to reconstruct a 3D model of the object. The method is extendable to more than two simultaneous views. When combined with megahertz pulse trains of X-ray free-electron lasers (XFELs) it will be possible to create movies able to resolve 3D trajectories with velocities of kilometers per second

Hard X-ray Phase-Contrast Tomographic Nanoimaging

Synchrotron‐based full‐field tomographic microscopy established itself as a tool for noninvasive investigations. Many beamlines worldwide routinely achieve micrometer spatial resolution while the isotropic 100‐nm barrier is reached and trespassed only by few instruments, mainly in the soft x‐ray regime. We present an x‐ray, full‐field microscope with tomographic capabilities operating at 10 keV and with a 3D isotropic resolution of 144 nm recently installed at the TOMCAT beamline of the Swiss Light Source. Custom optical components, including a beam‐shaping condenser and phase‐shifting dot arrays, were used to obtain an ideal, aperture‐matched sample illumination and very sensitive phase‐contrast imaging. The instrument has been successfully used for the nondestructive, volumetric investigation of single, unstained cells