2 research outputs found

    Uncertainty in energy yield estimation based on C-Si module roundrobin results.

    Get PDF
    Results of the European FP7 Sophia project roundrobin of c-Si module power measurements at STC and low irradiance and temperature coefficients were used to calculate annual energy yield at four sites. The deviation in the estimates solely due to the different measurement results is reported, neglecting the uncertainty in the meteorological data and losses unrelated to the performed measurements. While minimising the deviation in Pmax measurements remains the key challenge, the low irradiance and temperature coefficient contributions are shown to be significant. Propagating the measurement deviation in c-Si module measurements would suggest that expanded uncertainty in energy yield due to module characterization alone can be as high as ±3-4%

    Results of the Sophia module intercomparison part-1: stc, low irradiance conditions and temperature coefficients measurements of C-Si technologies

    Get PDF
    The results of a measurement intercomparison between eleven European laboratories measuring PV energy relevant parameters are reported. The purpose of the round-robin was to assess the uncertainty analyses of the participating laboratories on c-Si modules and to establish a baseline for the following thin-film round-robin. Alongside the STC measurements, low irradiance conditions (200W/m2) and temperature coefficients measurements were performed. The largest measurement deviation from the median at STC was for HIT modules from -3.6% to +2.7% in PMAX, but in agreement with the stated uncertainties of the participants. This was not the case for low irradiance conditions and temperature coefficients measurements with some partners underestimating their uncertainties. Larger deviations from the median from -5% to +3% in PMAX at low irradiance conditions and -6.6% to +18.3% for the PMAX temperature coefficient were observed. The main sources of uncertainties contributing to the spread in measurements were the RC calibration, mismatch factor and capacitive effects at STC and low irradiance conditions as well as the additional light inhomogeneity for the latter. The uncertainty in the junction temperature and the temperature deviation across the module were the major contributors for temperature coefficients measurements
    corecore