21 research outputs found
Experimental and Numerical Studies on a Centrifugal Pump with 2D-Curved Blades in Cavitating Condition
In the presented study a special test-pump with 2D curvature blade geometry in cavitating and non-cavitating conditions was investigated using different experimental techniques and a 3D numerical model of cavitating flows. Experimental and numerical results concerning pump characteristics and performance breakdown were compared at different flow conditions. Appearing types of cavitation and the spatial distribution of vapour structures within the runner were also analysed
Numerical and experimental investigations on the cavitating flow in a cascade of hydrofoils
The cavitating flow in a cascade of three hydrofoils was investigated by experimental means and numerical simulation. Experiments on the 2D-hydrofoils cascade were carried out at Darmstadt University of Technology in a rectangular test section of a cavitation tunnel. A numerical model developed at LEGI (Grenoble) to describe the unsteady behaviour of cavitation including the shedding of vapour structures was applied to the hydrofoils cascade geometry. Results of both experimental and numerical studies show a strong interaction between the cavities of each flow channel besides the typical self-oscillation of cloud cavitation. A detailed comparison of the results allows proposing an interpretation of the interaction mechanisms
Numerical and experimental investigation on the cavitating flow in a cascade of hydrofoils
The cavitating flow in a cascade of three hydrofoils was investigated by experimental means and numerical simulation. Experiments on the 2D-hydrofoils cascade were carried out at Darmstadt University of Technology in a rectangular test section of a cavitation tunnel. A numerical model developed at LEGI (Grenoble) to describe the unsteady behaviour of cavitation, including the shedding of vapour structures, was applied to the hydrofoils cascade geometry. Results of both experimental and numerical studies show a strong interaction between the cavities of each flow channel besides the typical self-oscillation of cloud cavitation. A detailed comparison of the results allows an interpretation of the interaction mechanisms to be proposed
Numerical Simulation of Turbopump Inducer Cavitating Behavior
In the present study a numerical model of 3D cavitating
flows is proposed. It is applied to investigate the behavior of a
spatial turbopump inducer in noncavitating and cavitating
conditions. Experimental and numerical results concerning inducer
characteristics and performance breakdown are compared at
different flow conditions. The cavitation development and the
spatial distribution of vapor structures within the inducer are
also analyzed. The results show the ability of the code to
simulate the quasi-steady cavitating behavior of such a complex
geometry. Discrepancies concerning the breakdown prediction are
also discussed
Recommended from our members
Prediction of cavitation and induced erosion inside a high-pressure fuel pump
The operation of a high-pressure, piston-plunger fuel pump, oriented for use in the common rail circuit of modern Diesel engines for providing fuel to the injectors is investigated in the present study from a numerical perspective. Both the suction and pressurization phases of the pump stroke were simulated with the overall flow time be-ing in the order of 12•10-3 s. The topology of the cavitating flow within the pump con-figuration was captured through the use of an Equation of State (EoS) implemented in the framework of a barotropic, homogeneous equilibrium model. Cavitation was found to set in within the pressure chamber as early as 0.2•10-3 s in the operating cycle, while the minimum liquid volume fraction detected was in the order of 60% during the sec-ond period of the valve opening. Increase of the in-cylinder pressure during the final stages of the pumping stroke lead to the collapse of the previously arisen cavitation structures and three layout locations, namely the piston edge, the valve/valve-seat re-gion and the outlet orifice, were identified as vulnerable to cavitation-induced erosion through the use of cavitation-aggressiveness indicators
Recommended from our members
Multiphase phenomena in Diesel fuel injection systems
Fuel Injection Equipment (FIE) are an integral component of modern Internal Combustion Engines (ICE), since they play a crucial role in the fuel atomization process and in the formation of a fuel/air combustible mixture, consequently affecting efficiency and pollutant formation. Advancements and improvements of FIE systems are determined by the complexity of the physical mechanisms taking place; the spatial scales are in the order of millimetres, flow may become locally highly supersonic, leading to very small temporal scales of microseconds or less. The operation of these devices is highly unsteady, involving moving geometries such as needle valves. Additionally, extreme pressure changes imply that many assumptions of traditional fluid mechanics, such as incompressibility, are no longer valid. Furthermore, the description of the fuel properties becomes an issue, since fuel databases are scarce or limited to pure components, whereas actual fuels are commonly hydrocarbon mixtures. Last but not least, complicated phenomena such as phase change or transition from subcritical to transcritical/supercritical state of matter further pose complications in the understanding of the operation of these devices
Numerical Study of the Effect of the Leading Edge Shape on Cavitation around Inducer Blade Sections
A numerical study of the cavitation behaviour of two-dimensional hydrofoils simulating a section of an inducer blade is presented. Two leading edge shapes were chosen to approach rocket engine inducer designs. They was tested with respect to the development of sheet cavitation.
The numerical model of cavitating flows is based on the 3D code FINE/TURBOTM, developed by NUMECA International. The cavitation process is taken into account by using a single fluid model, which considers the liquid vapour mixture as a homogeneous fluid whose density varies with respect to the static pressure.
Numerical results are compared with experimental ones, obtained in the CREMHyG large cavitation tunnel [Reboud et al. 1996]. Pressure distributions along the foil suction side and the tunnel walls were measured for different cavity lengths. Total pressure measurements along the foil suction side allow characterizing the effects of cavitation on the liquid flow.
Influence of the leading edge shape on the cavitation behaviour and comparison between experiments and numerical predictions are discussed
Numerical and experimental investigations on the cavitating flow in a cascade of hydrofoils
The cavitating flow in a cascade of three hydrofoils was investigated by experimental means and numerical simulation. Experiments on the 2D-hydrofoils cascade were carried out at Darmstadt University of Technology in a rectangular test section of a cavitation tunnel. A numerical model developed at LEGI (Grenoble) to describe the unsteady behaviour of cavitation including the shedding of vapour structures was applied to the hydrofoils cascade geometry. Results of both experimental and numerical studies show a strong interaction between the cavities of each flow channel besides the typical self-oscillation of cloud cavitation. A detailed comparison of the results allows proposing an interpretation of the interaction mechanisms