6,442 research outputs found
Efficiency and scaling of current drive and refuelling by spheromak injection into a tokamak
The first measurements of current drive (refluxing) and refuelling by spheromak injection into a tokamak are discussed in detail. The current drive mechanism is attributed to the process of helicity injection, and refuelling is attributed to the rapid incorporation of the dense spheromak plasma into the tokamak. After an abrupt increase (up to 80%), the tokamak current decays by a factor of three because of plasma cooling caused by the merging of the relatively cold spheromak with the tokamak. The tokamak density profile peaks sharply because of the injected spheromak plasma (n[sub]e increases by a factor of six) and then becomes hollow, suggestive of an interchange instability. Also discussed is the energy efficiency of spheromak injection current drive and the scaling of this process to larger machines. Refuelling by spheromak injection appears to be a viable scheme for larger machines. However, refluxing by spheromak injection is limited by geometrical and electrical efficiencies (both about 10%) as well as a high repetition rate requirement
Simple, high current LaB_6 cathode
A cathode constructed of a thin, directly heated strip of LaB_6 is described. The cathode is simple to construct, requires modest heating power, has high current emission capability and is quite rugged. Construction details will be given and cathode performance data presented. The cathode has been used in tokamak dc current injection experiments
Observations of fast anisotropic ion heating, ion cooling, and ion recycling in large-amplitude drift waves
Large-amplitude drift wave fluctuations are observed to cause severe ion temperature oscillations in plasmas of the Caltech Encore tokamak [J. M. McChesney, P. M. Bellan, and R. A. Stern, Phys. Fluids B 3, 3370 (1991)]. Experimental investigations of the complete ion dynamical behavior in these waves are presented. The wave electric field excites stochastic ion orbits in the plane normal (perpendicular to) to B, resulting in rapid perpendicular to heating. Ion-ion collisions impart energy along (parallel to) B, relaxing the perpendicular to-parallel to temperature anisotropy. Hot ions with large orbit radii escape confinement, reaching the chamber wall and cooling the distribution. Cold ions from the plasma edge convect back into the plasma (i.e., recycle), causing further cooling and significantly replenishing the density depleted by orbit losses. The ion-ion collision period tau(ii)similar to Tau(3/2)/n fluctuates strongly with the drift wave phase, due to intense (approximate to 50%) fluctuations in n and Tau. Evidence for particle recycling is given by observations of bimodal ion velocity distributions near the plasma edge, indicating the presence of cold ions (0.4 eV) superposed atop the hot (4-8 eV) plasma background. These appear periodically, synchronous with the drift wave phase at which ion fluid flow from the wall toward the plasma center peaks. Evidence is presented that such a periodic heat/loss/recycle/cool process is expected in plasmas with strong stochastic heating
Motion and equilibrium of a spheromak in a toroidal flux conserver
A number of experiments have been performed on spheromaks injected into the empty vacuum vessel of the Caltech ENCORE tokamak (i.e., without tokamak plasma) [Phys. Rev. Lett. 64, 2144 (1990); Phys. Fluids B 2, 1306 (1990)]. Magnetic probe arrays (in a number of configurations) have been used to make single shot, unaveraged, in situ measurements of the spheromak equilibrium. These measurements are important because (i) they reveal for the first time the equilibrium structure of spheromaks in a toroidal geometry, (ii) they provide a reliable estimate of magnetic helicity and energy of spheromak plasmas used in injection experiments [Phys. Rev. Lett. 64, 2144 (1990)], and (iii) they constitute the first measurements of spheromak motion across and interaction with static magnetic fields (which are useful in corroborating recent theories). Probe measurements in the tokamak dc toroidal field show for the first time that the spheromak exhibits a ``double tilt.''The spheromak first tilts while in the cylindrical entrance region, emerging into the tokamak vessel antialigned to the dc toroidal field, then expands into the tokamak vacuum vessel, and finally tilts again to form an oblate (nonaxisymmetric, m=1) configuration. In addition, the spheromak drifts vertically in the direction given by Jcenter×Btok, where Jcenter is the unbalanced poloidal current that threads the center of the spheromak torus. Probe arrays at different toroidal locations show that the spheromak shifts toroidally (horizontally left or right) in the direction opposite that of the static toroidal field. In the absence of toroidal flux, the m=1 object develops a helical pitch, the sense of the pitch depending on the sign of the spheromak helicity. The spheromak equilibrium in the toroidal vessel is well fit by a pressureless infinite cylindrical model; however, there is evidence of deviation from m=1 symmetry because of toroidal effects, nonuniform J/B profile, and finite beta. Experiments performed in a test facility consisting of the spheromak gun and a replica of the entrance region (with a closed end) show that the spheromak is generated with its axis coaxial with that of the gun. Coherent, m=2 magnetic modes are observed during the formation stage rotating in the E×B direction at about 125 kHz (rotation velocity corresponding to 40% of the Alfvén speed)
Real-time phase-selective data acquisition system for measurement of wave phenomena in pulsed plasma discharges
A novel data acquisition system and methodology have been developed for the study of wave phenomena in pulsed plasma discharges. The method effectively reduces experimental uncertainty due to shot-to-shot fluctuations in high repetition rate experiments. Real-time analysis of each wave form allows classification of discharges by wave amplitude, phase, or other features. Measurements can then be constructed from subsets of discharges having similar wave properties. The method clarifies the trade-offs between experimental uncertainty reduction and increased demand for data storage capacity and acquisition time. Finally, this data acquisition system is simple to implement and requires relatively little equipment: only a wave form digitizer and a moderately fast computer
Observation of fast stochastic ion heating by drift waves
Anomalously fast ion heating has been observed in the Caltech Encore tokamak [Phys. Rev. Lett. 59, 1436 (1987)], with the use of laser-induced fluorescence. This heating was found to be independent of electron temperature, but was well correlated with the presence of large-amplitude drift-Alfvén waves. Evidence is presented that suggests that the heating is stochastic and occurs when the ion displacement due to polarization drift becomes comparable to the perpendicular wavelength, i.e., when k[perpendicular] (mik[perpendicular] phi0/qB^2)~1. Stochastic heating may also be the cause of the anomalously high ion temperatures observed in reversed-field pinches
Poincaré maps define topography of Vlasov distribution functions consistent with stochastic dynamics
In a recent paper [A. D. Bailey et al., Phys. Rev. Lett. 34, 3124 (1993)], the authors presented direct planar laser induced fluorescence measurements of the oscillatory ion fluid velocity field in the presence of a large amplitude drift-Alfven wave. Surprisingly, the measured speeds were an order of magnitude lower than predicted by standard fluid theory, yet the flow pattern was consistent with the fluid theory. A new model, based on the connection between stochasticity and bulk behavior, is presented which gives insights into the cause of this behavior. It is shown that when particle motion is stochastic, invariant sets of a 'Poincaré map' define a flat-topped particle distribution function consistent with both the electromagnetic field driving the Vlasov equation and the fine-scale single particle dynamics. The approach is described for the general case and explored for a slab model of the observed drift wave
Characterization of a spheromak plasma gun: The effect of refractory electrode coatings
In order to investigate the proposition that high-Z impurities are responsible for the anomalously short lifetime of the Caltech spheromak, the center electrode of the spheromak plasma gun has been coated with a variety of metals (bare steel, copper, nickel, chromium, rhodium, and tungsten). Visible light (230–890 nm) emitted directly from the plasma in the gun breech was monitored for each of the coated electrodes. Plasma density and temperature and spheromak lifetime were compared for each electrode. Results indicate little difference in gun performance or macroscopic plasma parameters. The chromium and tungsten electrodes performed marginally better in that a previously reported helicity injection effect [Phys. Rev. Lett. 64, 2144 (1990)] is only observed in discharges using these electrode coatings. There are subtle differences in the detailed line emission spectra from the different electrodes, but the spectra are remarkably similar. The fact that (1) contrary to expectations, attempts to reduce high-Z impurities had only marginal effect on the spheromak lifetime coupled with (2) an estimate of Zeff<2 based on a 0-D model suggests that it is not impurities but some other mechanism that limits the lifetime of small, cold spheromaks. We will discuss the general characteristics of the spheromak gun as well as effects due to the coatings
Why current-carrying magnetic flux tubes gobble up plasma and become thin as a result
It is shown that if a current-carrying magnetic flux tube is bulged at its
axial midpoint z=0 and constricted at its axial endpoints z=+h,-h, then plasma
will be accelerated from z=+h,-h towards z=0 resulting in a situation similar
to two water jets pointed at each other. The ingested plasma convects embedded,
frozen-in toroidal magnetic flux from z=+h,-h to z=0. The counter-directed
flows collide and stagnate at z=0 and in so doing (i) convert their
translational kinetic energy into heat, (ii) increase the plasma density at
z~0, and (iii) increase the embedded toroidal flux density at z~0. The increase
in toroidal flux density at z~0 increases the toroidal field Bphi and hence
increases the magnetic pinch force at z~0 and so causes a reduction of the flux
tube radius at z~0. Thus, the flux tube develops an axially uniform
cross-section, a decreased volume, an increased density, and an increased
temperature. This model is proposed as a likely hypothesis for the
long-standing mystery of why solar coronal loops are observed to be axially
uniform, hot, and bright.Comment: to appear in Physics of Plasmas 24 pages, 5 figure
Direct numerical simulation of a confined three-dimensional gas mixing layer with one evaporating hydrocarbon-droplet-laden stream
Direct numerical simulations are performed of a confined three-dimensional, temporally developing, initially isothermal gas mixing layer with one stream laden with as many as 7.3×10^5 evaporating hydrocarbon droplets, at moderate gas temperature and subsonic Mach number. Complete two-way phase couplings of mass, momentum and energy are incorporated which are based on a thermodynamically self-consistent specification of the vapour enthalpy, internal energy and latent heat of vaporization. Effects of the initial liquid mass loading ratio (ML), initial Stokes number (St0), initial droplet temperature and flow three-dimensionality on the mixing layer growth and development are discussed. The dominant parameter governing flow modulation is found to be the liquid mass loading ratio. Variations in the initial Stokes number over the range 0.5 ⩽ St_0 ⩽ 2.0 do not cause significant modulations of either first- or second-order gas phase statistics. The mixing layer growth rate and kinetic energy are increasingly attenuated for increasing liquid loadings in the range 0 ⩽ ML ⩽ 0.35. The laden stream becomes saturated before evaporation is completed for all but the smallest liquid loadings owing to: (i) latent heat effects which reduce the gas temperature, and (ii) build up of the evaporated vapour mass fraction. However, droplets continue to be entrained into the layer where they evaporate owing to contact with the relatively higher-temperature vapour-free gas stream. The droplets within the layer are observed to be centrifuged out of high-vorticity regions and to migrate towards high-strain regions of the flow. This results in the formation of concentration streaks in spanwise braid regions which are wrapped around the periphery of secondary streamwise vortices. Persistent regions of positive and negative slip velocity and slip temperature are identified. The velocity component variances in both the streamwise and spanwise directions are found to be larger for the droplets than for the gas phase on the unladen stream side of the layer; however, the cross-stream velocity and temperature variances are larger for the gas. Finally, both the mean streamwise gas velocity and droplet number density profiles are observed to coincide for all ML when the cross-stream coordinate is normalized by the instantaneous vorticity thickness; however, first-order thermodynamic profiles do not coincide
- …