21,496 research outputs found
Radioactive silicon as a marker in thin-film silicide formation
A new technique using radioactive 31Si (half-life =2.62 h), formed in a nuclear reactor, as a marker for studying silicide formation is described. A few hundred angstroms of radioactive silicon is first deposited onto the silicon substrate, followed immediately by the deposition of a few thousand angstroms of the metal. When the sample is heated, a silicide is first formed with the radioactive silicon. Upon further silicide formation, this band of radioactive silicide can move to the surface of the sample if silicide formation takes place by diffusion of the metal or by silicon substitutional and/or vacancy diffusion. However, if the band of radioactive silicide stays at the silicon substrate interface it can be concluded that silicon diffuses by interstitial and/or grain-boundary diffusion. This technique was tested by studying the formation of Ni2Si on silicon at 330 °C. From a combination of ion-beam sputtering, radioactivity measurement, and Rutherford backscattering it is found that the band of radioactive silicide moves to the surface of the sample during silicide formation. From these results, implanted noble-gas marker studies and the rate dependence of Ni2Si growth on grain size, it is concluded that nickel is the dominant diffusing species during Ni2Si formation, and that it moves by grain-boundary diffusion
Dissociation mechanism for solid-phase epitaxy of silicon in the Si <100>/Pd2Si/Si (amorphous) system
Solid-phase epitaxial growth (SPEG) of silicon was investigated by a tracer technique using radioactive 31Si formed by neutron activation in a nuclear reactor. After depositing Pd and Si onto activated single-crystal silicon substrates, Pd2Si was formed with about equal amounts of radioactive and nonradioactive Si during heating at 400 °C for 5 min. After an 1-sec annealing stage (450-->500 °C in 1 h) this silicide layer, which moves to the top of the sample during SPEG, is etched off with aqua regia. From the absence of radioactive 31Si in the etch, it is concluded that SPEG takes place by a dissociation mechanism rather than by diffusion
New variables, the gravitational action, and boosted quasilocal stress-energy-momentum
This paper presents a complete set of quasilocal densities which describe the
stress-energy-momentum content of the gravitational field and which are built
with Ashtekar variables. The densities are defined on a two-surface which
bounds a generic spacelike hypersurface of spacetime. The method used
to derive the set of quasilocal densities is a Hamilton-Jacobi analysis of a
suitable covariant action principle for the Ashtekar variables. As such, the
theory presented here is an Ashtekar-variable reformulation of the metric
theory of quasilocal stress-energy-momentum originally due to Brown and York.
This work also investigates how the quasilocal densities behave under
generalized boosts, i. e. switches of the slice spanning . It is
shown that under such boosts the densities behave in a manner which is similar
to the simple boost law for energy-momentum four-vectors in special relativity.
The developed formalism is used to obtain a collection of two-surface or boost
invariants. With these invariants, one may ``build" several different mass
definitions in general relativity, such as the Hawking expression. Also
discussed in detail in this paper is the canonical action principle as applied
to bounded spacetime regions with ``sharp corners."Comment: Revtex, 41 Pages, 4 figures added. Final version has been revised and
improved quite a bit. To appear in Classical and Quantum Gravit
Epitaxial growth of deposited amorphous layer by laser annealing
We demonstrate that a single short pulse of laser irradiation of appropriate energy is capable of recrystallizing in open air an amorphous Si layer deposited on a (100) single-crystal substrate into an epitaxial layer. The laser pulse annealing technique is shown to overcome the interfacial oxide obstacle which usually leads to polycrystalline formation in normal thermal annealing
Hamiltonians for a general dilaton gravity theory on a spacetime with a non-orthogonal, timelike or spacelike outer boundary
A generalization of two recently proposed general relativity Hamiltonians, to
the case of a general (d+1)-dimensional dilaton gravity theory in a manifold
with a timelike or spacelike outer boundary, is presented.Comment: 17 pages, 3 figures. Typos correcte
Structural evaluation of concrete expanded polystyrene sandwich panels for slab applications
Sandwich panels are being extensively and increasingly used in building construction because they are light in weight, energy efficient, aesthetically attractive and can be easily handled and erected. This paper presents a structural evaluation of Concrete-Expanded Polystyrene (CEPS) sandwich panels for slab applications using finite element modeling approach. CEPS panels are made of expanded polystyrene foam sandwiched between concrete skins. The use of foam in the middle of sandwich panel reduces the weight of the structure and also acts as insulation against thermal, acoustics and vibration. Applying reinforced concrete skin to both sides of panel takes the advantages of the sandwich concept where the reinforced concrete skins take compressive and tensile loads resulting in higher stiffness and strength and the core transfers shear loads between the faces. This research uses structural software Strand7, which is based on finite element method, to predict the load deformation behaviour of the CEPS sandwich slab panels. Non linear static analysis was used in the numerical investigations. Predicted results were compared with the existing experimental results to validate the numerical approach used
Heteroepitaxy of deposited amorphous layer by pulsed electron-beam irradiation
We demonstrate that a single short pulse of electron irradiation of appropriate energy is capable of recrystallizing epitaxially an amorphous Ge layer deposited on either or Si single-crystal substrate. The primary defects observed in the case were dislocations, whereas stacking faults were observed in samples
Lightcone reference for total gravitational energy
We give an explicit expression for gravitational energy, written solely in
terms of physical spacetime geometry, which in suitable limits agrees with the
total Arnowitt-Deser-Misner and Trautman-Bondi-Sachs energies for
asymptotically flat spacetimes and with the Abbot-Deser energy for
asymptotically anti-de Sitter spacetimes. Our expression is a boundary value of
the standard gravitational Hamiltonian. Moreover, although it stands alone as
such, we derive the expression by picking the zero-point of energy via a
``lightcone reference.''Comment: latex, 7 pages, no figures. Uses an amstex symbo
Cryogenic microstripline-on-Kapton microwave interconnects
Simple broadband microwave interconnects are needed for increasing the size
of focal plane heterodyne radiometer arrays. We have measured loss and
cross-talk for arrays of microstrip transmission lines in flex circuit
technology at 297 and 77 K, finding good performance to at least 20 GHz. The
dielectric constant of Kapton substrates changes very little from 297 to 77 K,
and the electrical loss drops. The small cross-sectional area of metal in a
printed circuit structure yields overall thermal conductivities similar to
stainless steel coaxial cable. Operationally, the main performance tradeoffs
are between crosstalk and thermal conductivity. We tested a patterned ground
plane to reduce heat flux.Comment: 3 pages, 3 figures, submitted to The Review of Scientific Instrument
- …