134 research outputs found
Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali
International audienceDevelopments of new setups for radioactive ion beam production by the isotope-separator-on-line (ISOL) method are underway at GANIL in the frame of the SPIRAL (Système de Production d'Ions Radioactifs Accélérés en Ligne) and SPIRAL-II projects. The measurement of total efficiency and time behaviour of these new target/ion-source systems (TISSs) is a crucial step for these devices which aims to produce short-lived isotopes with high intensity. The overall atom-to-ion transformation efficiency depends on several processes: diffusion of the atoms out of the production target, effusion towards the ion source and ionization. The efficiency can be extracted using the ratio between the emerging yield and implanted flux in the TISS. Several methods have already been developed to achieve these measurements: the use of stable or radioactive beams, gas injection, or the introduction of solid material into the TISS. This paper focuses primarily on a method that uses stable alkali. A pulsed/CW alkali ion gun has been built and will be used to optimise diverse TISSs
Stabilization study at the sub-nanometer level at the interaction point of the future Compact Linear Collider
International audienc
Stabilization study at the sub-nanometer level at the interaction point of the future Compact Linear Collider
International audienc
Ion source developments for stable and radioactive ion beams at GANIL
Since now many years, the Ganil ion source team has in charge to develop ion sources with three main purposes. The first one concerns the radioactive ion production that implies high efficiency ion sources as the amount of created exotic atoms is very low (between 10 to 108 particle per second). The second one deals with high intensities of stable metallic ion beams for the injectors of the accelerator while the last one tries to increase the intensities of very high charge state ion beams for atomic physic. Concerning radioactive ion production, the recent results obtained, in collaboration with the ISN Grenoble group, with the 1+/n+ method drove us to develop a new concept of ecr ion source for monocharged ion production. The results of the first tests of this source will be given. This new idea for the construction of ecr ion source can be applied to multicharged ion production. Concerning the high charge state ion beam production, a new source called SUPERSHYPIE has been built that allow to increase by a factor 2 the length of the plasma of an ECR4M source. This new concept has just been started and has produced arround 50 nAe of Ar17+ . The first results of this new source will be presented. Concerning the developments of metallic ion beams, a separated poster will be presented at this workshop
Interaction point feedback design and integrated simulations to stabilize the CLIC final focus
International audienceThe Compact Linear Collider (CLIC) accelerator has strong precision requirements on offset position between the beams. The beam which is sensitive to ground motion needs to be stabilized to unprecedented requirements. Different Beam Based Feedback (BBF) algorithms such as Orbit Feedback (OFB) and Beam-Beam Offset Feedback (BBOF) have been designed. This paper focuses on the BBOF control which could be added to the CLIC baseline. It has been tested for different ground motion models in the presence of noises or disturbances and uses digital linear control with or without an adaptive loop. The simulations demonstrate that it is possible to achieve the required performances and quantify the maximum allowed noise level. This amount of admitted noises and disturbances is given in terms of an equivalent disturbance on the position of the magnet that controls the beam offset. Due to the limited sampling frequency of the process, the control loop is in a very small bandwidth. The study shows that these disturbances have to be lowered by other means in the higher frequency range
ECR Ion sources for radioactive ion beam production
17th workshop on ECR Ion Sources and their Applications, Lanzhou, Chine (2006)International audienceECRIS's dedicated to radioactive ion producton must be as efficient as those used for production of stable elements, but in addition they are subject to more specific constraints such as radiation hardness, short atom-to-ion transformation time, beam purity and low cost. Up to now, different target/ion-source system (TISSs) have been designed, using singly-charged ECRISs, multi-charged ion sources or an association of singly-to-multi-charged ECRISs. The main goal, constraints and advantages of different existing ECR setups wil be compared before a more detailed description is given of the one designed for the SPIRAL II project and ist future improvements
MONOBOB II : Latest results of monocharged ions source for SPIRAL2 project
Original publication available at http://www.jacow.orgInternational audienceAmong the sources which can be installed in the radioactive ion production module of SPIRAL II, a singly-charged ECRIS has been chosen to produce ions from gaseous elements. Its characterization is under way on a test bench at GANIL. Extraction, transport and response time results are presented
Permanent magnets under irradiation and radiocative alkali ion beam development for SPIRAL1
International audienceUp to now, eighteen Target Ion Source Systems (TISSs) have been built and used for the production of radioactive ion beams on SPIRAL 1 facility, based on the Isotope- Separator-On-Line (ISOL) method. The TISSs are composed of thick carbon targets and of fully permanentmagnet Electron Cyclotron Resonance Ion Sources (ECRISs) of the Nanogan III type. After irradiation and a decay period of two years, the irradiated TISSs are dismounted and if their magnetic fields are still suitable, the ECRIS are used with a new target. Thereby thirty-two runs have been performed using new or renewed TISSs. , After irradiation, the measured magnetic field sometimes reveals magnet damage. Our experience is reported here. In the second section, we present the progress on the NanoNaKE setup, which aims to extend the radioactive ion beams in SPIRAL 1 to the alkali elements, by connecting a surface-ionization source to the Nanogan III ECRIS via a compact 1+ ion beam line. The main issues and difficulties are discussed and the preliminary solutions are described
Production of multi-charged phosphorus ions with ecris 'SUPERSHyPIE' at GANIL
The Ganil's Ion Production Group tested the source SUPERSHyPIE123 for theproduction of phosphorus n+ ion beams. The SUPERSHyPIE ecris is used for many testsof multi-charged ion production and supply ion beams for LIMBE4 (low energie beamline). This ion source works with a 14.5ghz RF power injected by a circular waveguide inthe axis of the sourc
- …