Quantum Dot in Z-shaped Graphene Nanoribbon

Stimulated by recent advances in isolating graphene, we discovered that quantum dot can be trapped in Z-shaped graphene nanoribbon junciton. The topological structure of the junction can confine electronic states completely. By varying junction length, we can alter the spatial confinement and the number of discrete levels within the junction. In addition, quantum dot can be realized regardless of substrate induced static disorder or irregular edges of the junction. This device can be used to easily design quantum dot devices. This platform can also be used to design zero-dimensional functional nanoscale electronic devices using graphene ribbons.Comment: 4 pages, 3 figure

Average Density of States in Disordered Graphene systems

In this paper, the average density of states (ADOS) with a binary alloy disorder in disordered graphene systems are calculated based on the recursion method. We observe an obvious resonant peak caused by interactions with surrounding impurities and an anti-resonance dip in ADOS curves near the Dirac point. We also find that the resonance energy (Er) and the dip position are sensitive to the concentration of disorders (x) and their on-site potentials (v). An linear relation, not only holds when the impurity concentration is low but this relation can be further extended to high impurity concentration regime with certain constraints. We also calculate the ADOS with a finite density of vacancies and compare our results with the previous theoretical results.Comment: 10 pages, 8 figure

Tibetan sheep are better able to cope with low energy intake than Small-tailed Han sheep due to lower maintenance energy requirements and higher nutrient digestibilities

Tibetan sheep are indigenous to the Qinghai-Tibetan Plateau (QTP) and are well-adapted to and even thrive under the harsh alpine conditions. Small-tailed Han sheep were introduced to the plateau because of their high prolificacy and are maintained mainly in feedlots. Because of their different backgrounds, we hypothesised that Tibetan and Small-tailed Han sheep would differ in their utilization of energy intake and predicted that Tibetan sheep would cope better with low energy intake than Small-tailed Han sheep. To test this prediction, we determined nutrient digestibilities, energy requirements for maintenance and blood metabolite and hormone concentrations involved in energy metabolism in these breeds. Sheep of each breed (n = 24 of each, all wethers and 1.5 years of age) were distributed randomly into one of four groups and offered ad libitum diets of different digestible energy (DE) densities: 8.21, 9.33, 10.45 and 11.57 MJ DE/kg Dry matter (DM). Following 42 d of measuring feed intake, a 1-week digestion and metabolism experiment was done. DM intakes did not differ between breeds nor among treatments but, by design, DE intake increased linearly in both breeds as dietary energy level increased (P < 0.001). The average daily gain (ADG) was significantly greater in the Tibetan than Small-tailed Han sheep (P = 0.003) and increased linearly in both breeds (P < 0.001). In addition, from the regression analysis of ADG on DE intake, daily DE maintenance requirements were lower for Tibetan than for Small-tailed Han sheep (0.41 vs 0.50 MJ/BW0.75, P < 0.05). The DE and metabolizable energy (ME) digestibilities were higher in the Tibetan than Small-tailed Han sheep (P < 0.001) and increased linearly as the energy level increased in the diet (P < 0.001). At the lowest energy treatment, Tibetan sheep when compared with Small-tailed Han sheep, had: 1) higher serum glucose and glucagon, but lower insulin concentrations (P < 0.05), which indicated a higher capacity for gluconeogenesis and ability to regulate glucose metabolism; and 2) higher non-esterified fatty acids (NEFA) and lower very low density lipoprotein (VLDL) and triglyceride (TG) concentrations (P < 0.05), which indicated a higher capacity for NEFA oxidation but lower ability for triglyceride (TG) synthesis. We concluded that our prediction was supported as these differences between breeds conferred an advantage for Tibetan over Small-tailed Han sheep to cope better with low energy diets

Electronic Structure of Bilayer Graphene: A Real-space Green's Function Study

In this paper, a real-space analytical expression for the free Green's function (propagator) of bilayer graphene is derived based on the effective-mass approximation. Green's function displays highly spatial anisotropy with three-fold rotational symmetry. The calculated local density of states (LDOS) of a perfect bilayer graphene produces the main features of the observed scanning tunneling microscopy (STM) images of graphite at low bias voltage. Some predicted features of the LDOS can be verified by STM measurements. In addition, we also calculate the LDOS of bilayer graphene with vacancies by using the multiple-scattering theory (scatterings are localized around the vacancy of bilayer graphene). We observe that the interference patterns are determined mainly by the intrinsic properties of the propagator and the symmetry of the vacancies.Comment: 15 pages and 4 figure

An interactive meshless cutting model for nonlinear viscoelastic soft tissue in surgical simulators

In this paper, we present a novel interactive cutting simulation model for soft tissue based on the meshless framework. Unlike most existing methods that consider the cutting process of soft tissue in an over simplified manner, the presented model is able to simulate the complete cutting process that includes three stages: deformation before cutting open (DBCO), cutting open (CO), and deformation after cutting open (DACO). To characterize the complicated physical and mechanical properties of soft tissue, both nonlinearity and viscoelasticity were incorporated into the equations governing the motion of soft tissue. A line contact model was used for simulating the cutting process after analyzing the two major types of surgical instruments, i.e., scalpel and electrostick. The cutting speed and angle were taken into account in order to improve haptic rendering. Biomechanical tests and simulation experiments verified the validity of the introduced model. Specifically, the displacement vs. cutting force curves can be divided into three segments corresponding to the three stages of the cutting process. The results were also applied in a liver cutting simulating system and satisfactory visual effect and haptic feedback were achieved

Mid-infrared optical parametric amplifier using silicon nanophotonic waveguides

All-optical signal processing is envisioned as an approach to dramatically decrease power consumption and speed up performance of next-generation optical telecommunications networks. Nonlinear optical effects, such as four-wave mixing (FWM) and parametric gain, have long been explored to realize all-optical functions in glass fibers. An alternative approach is to employ nanoscale engineering of silicon waveguides to enhance the optical nonlinearities by up to five orders of magnitude, enabling integrated chip-scale all-optical signal processing. Previously, strong two-photon absorption (TPA) of the telecom-band pump has been a fundamental and unavoidable obstacle, limiting parametric gain to values on the order of a few dB. Here we demonstrate a silicon nanophotonic optical parametric amplifier exhibiting gain as large as 25.4 dB, by operating the pump in the mid-IR near one-half the band-gap energy (E~0.55eV, lambda~2200nm), at which parasitic TPA-related absorption vanishes. This gain is high enough to compensate all insertion losses, resulting in 13 dB net off-chip amplification. Furthermore, dispersion engineering dramatically increases the gain bandwidth to more than 220 nm, all realized using an ultra-compact 4 mm silicon chip. Beyond its significant relevance to all-optical signal processing, the broadband parametric gain also facilitates the simultaneous generation of multiple on-chip mid-IR sources through cascaded FWM, covering a 500 nm spectral range. Together, these results provide a foundation for the construction of silicon-based room-temperature mid-IR light sources including tunable chip-scale parametric oscillators, optical frequency combs, and supercontinuum generators

Bridging the Mid-Infrared-to-Telecom Gap with Silicon Nanophotonic Spectral Translation

Expanding far beyond traditional applications in optical interconnects at telecommunications wavelengths, the silicon nanophotonic integrated circuit platform has recently proven its merits for working with mid-infrared (mid-IR) optical signals in the 2-8 {\mu}m range. Mid-IR integrated optical systems are capable of addressing applications including industrial process and environmental monitoring, threat detection, medical diagnostics, and free-space communication. Rapid progress has led to the demonstration of various silicon components designed for the on-chip processing of mid-IR signals, including waveguides, vertical grating couplers, microcavities, and electrooptic modulators. Even so, a notable obstacle to the continued advancement of chip-scale systems is imposed by the narrow-bandgap semiconductors, such as InSb and HgCdTe, traditionally used to convert mid-IR photons to electrical currents. The cryogenic or multi-stage thermo-electric cooling required to suppress dark current noise, exponentially dependent upon the ratio Eg/kT, can limit the development of small, low-power, and low-cost integrated optical systems for the mid-IR. However, if the mid-IR optical signal could be spectrally translated to shorter wavelengths, for example within the near-infrared telecom band, photodetectors using wider bandgap semiconductors such as InGaAs or Ge could be used to eliminate prohibitive cooling requirements. Moreover, telecom band detectors typically perform with higher detectivity and faster response times when compared with their mid-IR counterparts. Here we address these challenges with a silicon-integrated approach to spectral translation, by employing efficient four-wave mixing (FWM) and large optical parametric gain in silicon nanophotonic wires

A Brain Storm Optimization with Multiinformation Interactions for Global Optimization Problems

The original BSO fails to consider some potential information interactions in its individual update pattern, causing the premature convergence for complex problems. To address this problem, we propose a BSO algorithm with multi-information interactions (MIIBSO). First, a multi-information interaction (MII) strategy is developed, thoroughly considering various information interactions among individuals. Specially, this strategy contains three new MII patterns. The first two patterns aim to reinforce information interaction capability between individuals. The third pattern provides interactions between the corresponding dimensions of different individuals. The collaboration of the above three patterns is established by an individual stagnation feedback (ISF) mechanism, contributing to preserve the diversity of the population and enhance the global search capability for MIIBSO. Second, a random grouping (RG) strategy is introduced to replace both the K-means algorithm and cluster center disruption of the original BSO algorithm, further enhancing the information interaction capability and reducing the computational cost of MIIBSO. Finally, a dynamic difference step-size (DDS), which can offer individual feedback information and improve search range, is designed to achieve an effective balance between global and local search capability for MIIBSO. By combining the MII strategy, RG, and DDS, MIIBSO achieves the effective improvement in the global search ability, convergence speed, and computational cost. MIIBSO is compared with 11 BSO algorithms and five other algorithms on the CEC2013 test suit. The results confirm that MIIBSO obtains the best global search capability and convergence speed amongst the 17 algorithms

Distribution of HLA-A, -B and -DRB1 Genes and Haplotypes in the Tujia Population Living in the Wufeng Region of Hubei Province, China

BACKGROUND: The distribution of HLA alleles and haplotypes varies widely between different ethnic populations and geographic areas. Before any genetic marker can be used in a disease-associated study it is therefore essential to investigate allelic frequencies and establish a genetic database. METHODOLOGY/PRINCIPAL FINDINGS: This is the first report of HLA typing in the Tujia group using the Luminex HLA-SSO method HLA-A, -B and -DRB1 allelic distributions were determined in 124 unrelated healthy Tujia individuals, and haplotypic frequencies and linkage disequilibrium parameters were estimated using the maximum-likelihood method. In total 10 alleles were detected at the HLA-A locus, 21 alleles at the HLA-B locus and 14 alleles at the HLA-DRB1 locus. The most frequently observed alleles in the HLA-I group were HLA-A*02 (35.48%), A*11 (28.23%), A*24 (15.73%); HLA-B*40 (25.00%), B*46 (16.13%), and B*15 (15.73%). Among HLA-DRB1 alleles, high frequencies of HLA-DRB1*09 (25.81%) were observed, followed by HLA-DRB1*15 (12.9%), and DRB1*12 (10.89%). The two-locus haplotypes at the highest frequency were A*02-B*46A (8.47%), followed by A*11-B*40 (7.66%), A*02-B*40 (8.87%), A*11-B*15 (6.45%), A*02-B*15 (6.05%), B*40-DRB1*09 (9.27%) and B*46-DRB1*09 (6.45%). The most common three-locus haplotypes found in the Tujia population were A*02-B*46-DRB1*09 (4.84%) and A*02-B*40-DRB1*09 (4.03%). Fourteen two-loci haplotypes had significant linkage disequilibrium. Construction of a neighbor-joining phylogenetic tree and principal component analysis using the allelic frequencies at HLA-A was performed to compare the Tujia group and twelve other previously reported populations. The Tujia population in the Wufeng of Hubei Province had the closest genetic relationship with the central Han population, and then to the Shui, the Miao, the southern Han and the northern Han ethnic groups. CONCLUSIONS/SIGNIFICANCE: These results will become a valuable source of data for tracing population migration, planning clinical organ transplantation, carrying out HLA-linked disease-associated studies and forensic identification