Design Enhancement of Biomedical Scaffolds Made By Selective Laser Melting

Selective laser melting (SLM) is increasingly used to fabricate biomedical scaffolds. However, the intrinsic specifications of the process such as laser spot size, layer thickness, and particle size limit the production accuracy, altering the geometrical characteristics and mechanical properties of the scaffolds. This work attempts to assess and improve the mechanical properties of TiAl6V4 biomedical scaffolds by eliminating/modifying the sharp and thin nodes (as the main source of stress concentrations and lowering the mechanical properties). This is carried out through a gradual increase of the beam (strut) thickness around the nodes where corresponding struts meet. The compression performance of these scaffolds was assessed and compared to common examples (unaltered struts) and to scaffolds designed with thicker struts in the centre of the beams (demonstrating the largest contrast). The findings prove that the thickening of the nodal points improves the strain distribution while maintains the mechanical properties at an identical solid volume fraction. This can be used to improve the scaffold design by a gradual strut thickness (in a comparable volume fraction) for an improved bio-mechanical performance.Mechanical Engineerin

Spin-Charge Coupling in lightly doped Nd2−x_{2-x}Cex_{x}CuO4_4

We use neutron scattering to study the influence of a magnetic field on spin structures of Nd$_2$CuO$_4$. On cooling from room temperature, Nd$_2$CuO$_4$ goes through a series of antiferromagnetic (AF) phase transitions with different noncollinear spin structures. While a c-axis aligned magnetic field does not alter the basic zero-field noncollinear spin structures, a field parallel to the CuO$_2$ plane can transform the noncollinear structure to a collinear one ("spin-flop" transition), induce magnetic disorder along the c-axis, and cause hysteresis in the AF phase transitions. By comparing these results directly to the magnetoresistance (MR) measurements of Nd$_{1.975}$Ce$_{0.025}$CuO$_4$, which has essentially the same AF structures as Nd$_2$CuO$_4$, we find that a magnetic-field-induced spin-flop transition, AF phase hysteresis, and spin c-axis disorder all affect the transport properties of the material. Our results thus provide direct evidence for the existence of a strong spin-charge coupling in electron-doped copper oxides.Comment: 12 pages, 12 figure

Polaronic optical absorption in electron-doped and hole-doped cuprates

Polaronic features similar to those previously observed in the photoinduced spectra of cuprates have been detected in the reflectivity spectra of chemically doped parent compounds of high-critical-temperature superconductors, both $n$-type and $p$-type. In Nd$_2$CuO$_{4-y}$ these features, whose intensities depend both on doping and temperature, include local vibrational modes in the far infrared and a broad band centered at $\sim$ 1000 cm$^{-1}$. The latter band is produced by the overtones of two (or three) local modes and is well described in terms of a small-polaron model, with a binding energy of about 500 cm$^{-1}$. Most of the above infrared features are shown to survive in the metallic phase of Nd$_{2-x}$Ce$_x$Cu0$_{4-y}$, Bi$_2$Sr$_2$CuO$_6$, and YBa$_2$Cu$_3$O$_{7-y}$, where they appear as extra-Drude peaks. The occurrence of polarons is attributed to local modes strongly coupled to carriers, as shown by a comparison with tunneling results.Comment: File latex, 31 p., submitted to Physical Review B. Figures may be faxed upon reques

Method for Measuring the Momentum-Dependent Relative Phase of the Superconducting Gap of High-Temperature Superconductors

The phase variation of the superconducting gap over the (normal) Fermi surface of the high-temperature superconductors remains a significant unresolved question. Is the phase of the gap constant, does it change sign, or is it perhaps complex? A detailed answer to this question would provide important constraints on various pairing mechanisms. Here we propose a new method for measuring the relative gap PHASE on the Fermi surface which is direct, is angle-resolved, and probes the bulk. The required experiments involve measuring phonon linewidths in the normal and superconducting state, with resolution available in current facilities. We primarily address the La_1.85Sr_.15CuO_4 material, but also propose a more detailed study of a specific phonon in Bi_2Sr_2CaCu_2O_8.Comment: 13 pages (revtex) + 5 figures (postscript-included), NSF-ITP-93-2

Influence of the pseudogap on the superconductivity-induced phonon renormalization in high-Tc_c superconductors

We investigate the influence of a d-density wave (DDW) gap on the superconductivity-induced renormalization of phonon frequency and linewidth. The results are discussed with respect to Raman and inelastic neutron scattering experiments. It turns out that the DDW gap can enhance the range of frequencies for $q=0$ phonon softening depending on the underlying band structure. Moreover we show that an anisotropic 'd-wave' pseudogap can also contribute to the q-dependent linewidth broadening of the 340cm$^{-1}$ phonon in YBa$_2$Cu$_3$O$_7$.Comment: 4 page

Validation of a Thin-Layer Chromatography for the Determination of Hydrocortisone Acetate and Lidocaine in a Pharmaceutical Preparation

A new specific, precise, accurate, and robust TLC-densitometry has been developed for the simultaneous determination of hydrocortisone acetate and lidocaine hydrochloride in combined pharmaceutical formulation. The chromatographic analysis was carried out using a mobile phase consisting of chloroform + acetone + ammonia (25%) in volume composition 8 : 2 : 0.1 and silica gel 60F 254 plates. Densitometric detection was performed in UV at wavelengths 200 nm and 250 nm, respectively, for lidocaine hydrochloride and hydrocortisone acetate. The validation of the proposed method was performed in terms of specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, and robustness. The applied TLC procedure is linear in hydrocortisone acetate concentration range of 3.75 ÷ 12.50 g⋅spot −1 , and from 1.00 ÷ 2.50 g⋅spot −1 for lidocaine hydrochloride. The developed method was found to be accurate (the value of the coefficient of variation CV [%] is less than 3%), precise (CV [%] is less than 2%), specific, and robust. LOQ of hydrocortisone acetate is 0.198 g⋅spot −1 and LOD is 0.066 g⋅spot −1 . LOQ and LOD values for lidocaine hydrochloride are 0.270 and 0.090 g⋅spot −1 , respectively. The assay value of both bioactive substances is consistent with the limits recommended by Pharmacopoeia

Juvenile tench ( Tinca tinca L.) response to practical diets with different replacement levels of fish meal by pea protein concentrate supplemented with methionine

.The effects of methionine supplementation in diets with different replacement levels of fish meal (FM) by pea protein concentrate (PPC) on survival, growth performance and body composition of juvenile tench (0.39 g of initial weight) were studied in a 90-day experiment. Six practical diets (50% crude protein) differing in replacement level of FM by PPC were tested: 0% (control diet), 35%,45%, 60%, 75% or 85%, corresponding to 0, 285, 366, 487, 608 and 685.4 g PPC kg−1 diet respectively. To provide the same amount as in control diet, methionine was included from the 45% substitution level. Survival rates were high, between 93.7% and 100%, without differences among treatments. Juveniles fed 75% and 85% of replacement diets showed lower (p < 0.05) weight and specific growth rate, which cannot be attributed to methionine deficiency. In all treatments, percentages of fish with externally visible deformities were low (under 0.1%). The increase in PPC diet content resulted in a significant reduction of lipid content in whole-body juvenile. Minimum methionine requirements for juvenile tench could be estimated in 10 g kg−1 diet and supplementation over this amount would be not necessary. Juvenile tench exhibited a high tolerance to PPC dietary content, up to 487 g kg−1, without affecting growth performance, which make possible to consider this vegetal source of protein as a suitable substitute to FM.S