Characteristics of homogeneous multi-core fibers for SDM transmission

We describe optical data transmission systems using homogeneous, single-mode, multi-core fibers (MCFs). We first briefly discuss space-division multiplexing (SDM) fibers, observing that no individual SDM fiber offers overwhelming advantages over bundles of single-mode fiber (SMF) across all transmission regimes. We note that for early adoption of SDM fibers, uncoupled or weakly coupled fibers which are compatible with existing SDM infrastructure have a practical advantage. Yet, to be more attractive than parallel SMF, it is also necessary to demonstrate benefits beyond improved spatial spectral efficiency. It is hoped that the lower spread of propagation delays (skew) between spatial channels in some fibers can be exploited for improved performance and greater efficiency from hardware sharing and joint processing. However, whether these benefits can be practically harnessed and outweigh impairments or effort to mitigate cross talk between spatial channels is not yet clear. Hence, focusing on homogeneous MCFs, we first describe measurements and simulations on the impact of inter-core cross talk in such fibers before reporting experimental investigation into the spatial channel skew variation with a series of the experimental results including a comparison with SMF in varying environmental conditions. Finally, we present some system and transmission experiments using parallel recirculating loops that enable demonstration of both multi-dimensional modulation and joint digital processing techniques across three MCF cores. Both techniques lead to increased transmission reach but highlight the need for further experimental analysis to properly characterize the potential benefits of correlated propagation delays in such fibers

Clock and Data Recovery-Free Data Communications Enabled by Multi-core Fiber with Low Thermal Sensitivity of Skew

Optical switching has the potential to scale the capacity of data center networks (DCN) with a simultaneously reduction in latency and power consumption. One of the main challenges of optically-switched DCNs is the need for fast clock and data recovery (CDR). Because the DCN traffic is dominated by small packets, the CDR locking time is required to be less than one nanosecond for achieving high network throughput. This need for sub-nanosecond CDR locking time has motivated research on optical clock synchronization techniques, which deliver synchronized clock signals through optical fibers such that the CDR modules in each transceiver only need to track the slow change of clock phase, due to change of the time of flight as temperature varies. It is desired to remove the need for clock phase tracking (and thereby the CDR modules) if the temperatureinduced clock phase drift can be significantly reduced, which would reduce the power consumption and the cost of transceivers. Previous studies have shown that the temperature-induced skew change between multi-core fiber (MCF) cores can be forty times lower than that of standard single mode fibers. Thus, clock-synchronized transmission maybe possible by using two different MCF cores for clock and data transmission, respectively, enabling the sharing of an optical clock with stable clock phase. To investigate the potential of MCF for CDR-free short-reach communications, we first improve the measurement method of the temperature dependent inter-core skew change by using a modified delay interferometer, achieving a resolution of 3.8 femtoseconds for accurate inter-core skew measurements. Building on the MCF measurement results, we carried out an MCF-based clock-synchronized transmission experiment, demonstrating the feasibility of CDR-free data communications over a temperature range of 43 ◦C that meets DCN requirements

Performance of adaptive DD-OFDM multicore fiber links and its relation with intercore crosstalk

Adaptive direct-detection (DD) orthogonal frequency-division multiplexing (OFDM) is proposed to guarantee signal quality over time in weakly-coupled homogenous multicore fiber (MCFs) links impaired by stochastic intercore crosstalk (ICXT). For the first time, the received electrical power of the ICXT and the performance of the adaptive DD-OFDM MCF link are experimentally monitored quasi-simultaneously over a 210 hour period. Experimental results show that the time evolution of the error vector magnitude due to the ICXT can be suitably estimated from the normalized power of the detected crosstalk. The detected crosstalk results from the beating between the carrier in the test core and ICXT originating from the carrier and modulated signal from interfering core. The results show that the operation of DD-OFDM systems employing fixed modulation can be severely impaired by the presence of ICXT that may unpredictable vary in both power and frequency. The system may suffer from deleterious impact of moderate ICXT levels over a time duration of several hours or from peak ICXT levels occurring over a number of minutes. Such power fluctuations can lead to large variations in bit error ratio (BER) for static modulation schemes. Here, we show that BER fluctuations may be minimized by the use of adaptive modulation techniques and that in particular, the adaptive OFDM is a viable solution to guarantee link quality in MCF-based systems. An experimental model of an adaptive DD-OFDM MCF link shows an average throughput of 12 Gb/s that represents a reduction of only 9% compared to the maximum throughput measured without ICXT and an improvement of 23% relative to throughput obtained with static modulation.info:eu-repo/semantics/publishedVersio

Intercore crosstalk in direct-detection homogeneous multicore fiber systems impaired by laser phase noise

The impact of the laser phase noise on the photodetected intercore crosstalk and performance of direct-detection orthogonal frequency division multiplexing multicore fiber systems is experimentally investigated. A new solution to overcome the performance fluctuations over time induced by the combined effect of laser phaser noise and intercore crosstalk is proposed. The solution uses adaptive modulation with extended time memory to estimate the bit loading scheme of each subcarrier from the mean and maximum error vector magnitude evaluated over the last ten blocks of transmitted training symbols. During measurements of up to 90 hours, intercore crosstalk power variation induced by fast laser phase noise variations exceeded 20 dB in both time and frequency, and error vector magnitude fluctuations of 4 dB were observed on a sub-second timescale. It is shown that direct-detection orthogonal frequency division multiplexing multicore fiber based systems employing a typical adaptive modulation solution, in which the bit loading scheme is evaluated from a single set of training symbols, suffer from unacceptable outage probabilities and are unable to counteract the fast power variations of intercore crosstalk and phase noise induced impairments. By extending the system memory used to estimate the bit loading scheme employed by the adaptive technique, an outage probability reduction by one order of magnitude is achieved. This reduction is attained by using the mean of the error vector magnitude evaluated over the last ten blocks of training symbols to estimate the bit loading scheme of subcarriers. Further reduction of the outage probability by four orders of magnitude is also demonstrated using a more conservative approach to estimate the bit loading scheme of the subcarriers. However, this conservative approach, based on the maximum error vector magnitude, may lead to additional loss of the average throughput.info:eu-repo/semantics/publishedVersio

Single parity check-coded 16QAM over spatial superchannels in multicore fiber transmission

We experimentally investigate single-parity check (SPC) coded spatial superchannels based on polarization-multiplexed 16-ary quadrature amplitude modulation (PM-16QAM) for multicore fiber transmission systems, using a 7-core fiber. We investigate SPC over 1, 2, 4, 5 or 7 cores in a back-to-back configuration and compare the sensitivity to uncoded PM-16QAM, showing that at symbol rates of 20 Gbaud and at a bit-error-rate (BER) of 10(-3), the SPC superchannels exhibit sensitivity improvements of 2.7 dB, 2.0 dB, 1.7 dB, 1.3 dB, and 1.1 dB, respectively. We perform both single channel and wavelength division multiplexed (WDM) transmission experiments with 22 GHz channel spacing and 20 Gbaud channel symbol rate for SPC over 1, 3 and 7 cores and compare the results to PM-16QAM with the same spacing and symbol rate. We show that in WDM signals, SPC over hl1 core can achieve more than double the transmission distance compared to PM-16QAM at the cost of 0.91 bit/s/Hz/core in spectral efficiency (SE). When sharing the parity-bit over 7 cores, the loss in SE becomes only 0.13 bit/s/Hz/core while the increase in transmission reach over PM-16QAM is 44 %. (C) 2015 Optical Society of Americ

Joint Phase Tracking for Multicore Transmission with Correlated Phase Noise

Space-division multiplexed transmission over multicore fibers offers potential for joint-core processing to compensate for correlated phase noise. We review methods that take advantage of the phase-noise correlation across cores and assess their benefits in terms of transmission reach and pilot-rate requirements

High capacity transmission with few-mode fibers

We experimentally investigate high-capacity few-mode fiber transmission for short and medium-haul optical links. In separate experiments, we demonstrate C + L band transmission of 283 Tbit/s over a single 30 km span and recirculating loop transmission of 159 Tbit/s over 1045 km graded-index three mode fiber. The first experiment reached a data-rate per fiber mode within 90% of the record data-rates reported in the same transmission bands for single-mode fibers. The second experiment demonstrated the feasibility of reaching high data-rates over long distance few-mode fiber transmission, despite strong impairments due to mode-dependent loss and differential mode delay

Film support and the challenge of ‘sustainability’: on wing design, wax and feathers, and bolts from the blue

In recognition of the importance of film in generating both economic and cultural value, the UK Labour government set up a new agency – the United Kingdom Film Council (UKFC) – in 2000 with a remit to build a sustainable film industry. But, reflecting a plethora of differing expectations in relation to the purposes behind public support for film, the UKFC's agenda shifted and broadened over the organisation's lifetime (2000–11). Apparently unconvinced by the UKFC's achievements, the Coalition government which came to power in May 2010 announced the Council's abolition and reassigned its responsibilities as part of a general cost-cutting strategy. Based on original empirical research, this article examines how the UKFC's sense of strategic direction was determined, how and why the balance of objectives it pursued changed over time and what these shifts tell us about the nature of film policy and the challenges facing bodies that are charged with enacting it in the twenty-first century

Modulation and detection for multicore superchannels with correlated phase noise [Invited]

SDM fibers offer new opportunities and challenges for joint transmitter and receiver processing. We review multidimensional modulation and detection theory, describe algorithms for phase tracking and detection over spatial superchannels, and present some experimental results