61 research outputs found
Criteria for Architectural Integration of Active Solar Systems IEA Task 41, Subtask A
AbstractThe upcoming growing use of active solar technologies, photovoltaics and solar thermal, brings an important challenge for designers willing to keep a high architectural quality of buildings. The IEA Task 41 “Solar Energy and Architecture” brought together international experts to address key issues in this process.Subtask A dealt with the specific architectural integration issues brought by active solar systems, solar thermal and photovoltaics. A description of the main criteria and of the various ways the architect can use each technology to satisfy these criteria has been produced.The reasons for the limited use of such systems are presented, as identified through a large international web survey, pinpointing low architects knowledge and low products integrability as major barriers (deliverable T.41.A.1). Architectural integration criteria are defined, based on previous studies, and related guidelines for architects and products developers are presented in separate targeted deliverables (T.41.A.2 and T.41.A.3). Deliverable T.41.A.2 provides a comprehensive set of integration guidelines addressed to architects, highlighting all the integration possibilities offered today by both solar thermal and photovoltaics systems. Deliverable T.41.A.3 is intended to counter the lack of innovative products conceived for building integration, by addressing to manufacturers a detailed set of products development guidelines. Finally, already existing innovative products achieving good integrability characteristics are collected and presented in a new attractive website (T.41.A.6)
Urban acceptability of solar installations: LESO-QSV GRID, a software tool to support municipalities
Barriers and Needs for Building Integration of Solar Thermal and Photovoltaics
The International Energy Agency (IEA) Task 41 is conducting an international survey concerning the integration of solar energy systems and architecture in order to identify barriers that architects are facing in incorporating active solar technologies in their design. The survey investigates the possible barriers of solar thermal and photovoltaics, to understand why there is still a resistance among architects for using these elements in their architectural design. Moreover, it asks about the needs of architects, on what should be developed for a wider use of solar active systems in the building skin. The survey also provides valuable information towards a comparative study of the two solar technologies from the perspective of architectural integration potentials. As the survey is conducted in 13 countries around the world (EU, Canada, South Korea), it gives a possibility to identify possible regional differences in understanding and acceptance of active solar technologies
Bringing colours to solar collectors: a contribution to an increased building "integrability"
One main obstacle to facade integration of solar thermal collectors lies in the formal characteristics and low flexibility of available products. Major problems are the black and irregular appearance of their absorbers, their low dimensional flexibility and large size at the façade scale, and finally the lack of dummy elements. This paper presents a revolutionary though simple solution to all these problems, consisting in a novel coloured glass, able to mask absorber and piping while letting the solar energy pass through. Different colours can be produced and combined with different diffusing surface treatments on the glass outer side, finally offering a broad palette of novel glazing. These resulting glazing not only hide the black colour of the absorber and its imperfections, but can also be used as facade cladding on the non exposed areas of the building envelope, opening the way to the concept of active solar facades and offering a new level of freedom to architect
Achieving Solar Energy in Architecture-IEA SHC Task 41
AbstractDespite the wide diversity of available solar technologies, solar energy systems are still not considered as main stream technologies in building practice. This may be attributed to several factors such as lack of awareness and knowledge among architects, lack of tools supporting the design process, and lack of solar products designed for building integration. In order to address these issues, the IEA SHC Task 41 “Solar Energy and Architecture” was carried out during 2009 to 2012. The main aim was to promote the use of solar energy systems within high quality architecture. The main expected outcome is an increased use of solar energy in buildings, reducing the non-renewable energy use and GHG emissions. Fourteen countries participated. The work was organized in three subtasks: A) integration criteria and guidelines, B) tools and methods for architects, and C) case studies and communication guidelines. This article presents an overview of the Task's activities and results. The results include an inventory of computer tools, a literature review, a survey on solar systems perception and use by architects, a survey on needs regarding tools for solar design, recommendations for computer tool developers and different guidelines for solar product developers and architects. Finally an extensive collection of more than 250 case studies with integration of solar systems was evaluated and resulting in the online publication of around 65 selected cases demonstrating inspiring solar architecture. The results of Task 41 are also currently being disseminated through seminars and workshops for building professionals
Facade Integration of Solar Thermal Collectors:A Breakthrough?
One main barrier to the acceptability of façade use of solar thermal collectors is their black appearance and the visibility of piping or absorber irregularities through the glazing. To facilitate façade integration, a project was set up to develop selective filters reflecting only a small part of the solar spectrum in the visible range while letting the rest of the radiation heat the absorber. These filters were successfully produced and, combined with a diffusing glass treatment, have achieved the desired masking effect with minor impact on the collector efficiency (less than 10%). Glasses of various colours combined with several diffusing finishing (acid etching, structured glass etc…) can be produced that are able to hide the absorber. Such glazings will allow the use of the same product both in front of façade areas equipped with solar absorbers (as collector external glass) and in front of the non exposed areas (as façade cladding), opening the way to a broad variety of active façade designs. The active elements can then be positioned at will on the exposed areas, and their quantity determined only by thermal needs. By freeing the dimension of the façade area that can be clad with this glazing from the thermally needed surface for collectors, a major step to help architects use solar thermal on facades has been taken
Designing photovoltaic systems for architectural integration
This document is addressed to manufacturers of photovoltaic systems. It describes the main criteria for a successful integration of PV systems in buildings and proposes a methodology for the design of systems specifically conceived for building integration. For each specific sub-technology, it provides a comprehensive set of practical recommendations that should lead to the production of new systems appealing to architects
Solar energy systems in architecture - Integration criteria and guidelines
This document is conceived for architects and intended to be as clear and practical as possible. It summarizes the knowledge needed to integrate active solar technologies (solar thermal and photovoltaics) into buildings, handling at the same time architectural integration issues and energy production requirements. Solar thermal and photovoltaics are treated separately, but the information is given following the same structure: 1- Main technical information; 2- Constructive/functional integration possibilities in the envelope layers; 3- System sizing and positioning criteria; 4- Good integration examples; 5- Formal flexibility offered by standard products; 6 - Innovative market products. To complete the information the manual ends with a short section dedicated to the differences and similarities between solar thermal and photovoltaic systems, with the purpose to help architects make an energetic and architecturally optimized use of the sun exposed surfaces of their buildings
Product developments and dissemination activities
This document shows product developments and dissemination activities carried out within the framework of, or in close relation to, the project IEA SHC Task 41; Solar Energy and Architecture. This Task gathered researchers and practicing architects from 14 countries in the three year project whose aim was to identify the obstacles architects are facing when incorporating solar design in their projects, to provide resources for overcoming these barriers and to help improving architects’ communication with other stakeholders in the design of solar buildings. Participating countries were Australia, Austria, Belgium, Canada, Denmark, Germany, Italy, Norway, Portugal, Republic of Korea, Singapore, Spain, Sweden and Switzerland. The report gives not a complete list of activities, but shows the different types of activities to spread the findings in Task 41 and to initiate product developments in participating countries
The communication process
In order to stimulate an increased use of solar in energy conscious building design, the Task 41 participants have developed a Communication Guideline as a tool to support architects in their communication process with especially clients, authorities and contractors. Today the energy performance of solar solutions is well documented and well known especially in the “technical environment”. This knowledge, however, needs to be communicated in a convincing way to the decision makers in order to ensure a broad implementation of sustainable solar solutions in future building design. The Communication Guideline includes convincing arguments and facts supporting the implementation of solar based design solutions. The Communication Guideline is divided in three main parts: • Part 1: Convincing clients to request and commission solar buildings • Part 2: Communication strategies at the design/ construction team level • Part 3: Tools and Reference
- …