15 research outputs found

    Π‘ΠΈΠ½Ρ‚Π΅Π·, микроструктура ΠΈ ΠΌΠ°Π³Π½ΠΈΡ‚Π½Ρ‹Π΅ свойства магнитомягких ΠΏΠ»Π΅Π½ΠΎΠΊ Π‘ΠΎΠ 

    Get PDF
    Soft magnetic thin CoP films were obtained by means of chemical metallization from aqueous cobalt salt solution in the presence of sodium hydroxide, citric acid and sodium hypophosphite as the reducing agent. The optimal values of the magnetic film parameters (saturation magnetization and width of ferromagnetic resonance line) were obtained by variation of composition of work solutions. It allows to reduce losses in their application in microwave devices. Microphotographs of magnetic film indicate a grain structure with a grain size of about 50 nm and presence of inclusions with the size of 3-5 nm. To determine the magnetic parameters of the investigated films the method of ferromagnetic resonance (FMR) absorption curves processing is used. The values of FMR line width and an effective magnetization of film material saturation were obtained.ΠŸΡ€ΠΈΠ²Π΅Π΄Π΅Π½Ρ‹ Ρ€Π΅Π·ΡƒΠ»ΡŒΡ‚Π°Ρ‚Ρ‹ исслСдования свойств магнитомягких Ρ‚ΠΎΠ½ΠΊΠΈΡ… ΠΏΠ»Π΅Π½ΠΎΠΊ Π‘ΠΎΠ , ΠΏΠΎΠ»ΡƒΡ‡Π΅Π½Π½Ρ‹Ρ… ΠΌΠ΅Ρ‚ΠΎΠ΄ΠΎΠΌ химичСской ΠΌΠ΅Ρ‚Π°Π»Π»ΠΈΠ·Π°Ρ†ΠΈΠΈ ΠΈΠ· Π²ΠΎΠ΄Π½ΠΎΠ³ΠΎ раствора Π½Π° основС Ρ†ΠΈΡ‚Ρ€Π°Ρ‚Π½Ρ‹Ρ… комплСксов с ΠΏΡ€ΠΈΠΌΠ΅Π½Π΅Π½ΠΈΠ΅ΠΌ Π² качСствС Ρ‰Π΅Π»ΠΎΡ‡Π½ΠΎΠ³ΠΎ Ρ€Π΅Π°Π³Π΅Π½Ρ‚Π° NaOH. Π‘ ΠΏΠΎΠΌΠΎΡ‰ΡŒΡŽ Π²Π°Ρ€ΠΈΠ°Ρ†ΠΈΠΈ составов Ρ€Π°Π±ΠΎΡ‡ΠΈΡ… растворов ΠΏΠΎΠ»ΡƒΡ‡Π΅Π½Ρ‹ ΠΎΠΏΡ‚ΠΈΠΌΠ°Π»ΡŒΠ½Ρ‹Π΅ значСния ΠΌΠ°Π³Π½ΠΈΡ‚Π½Ρ‹Ρ… ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€ΠΎΠ² ΠΏΠ»Π΅Π½ΠΎΠΊ: намагничСнности насыщСния ΠΈ ΡˆΠΈΡ€ΠΈΠ½Ρ‹ Π»ΠΈΠ½ΠΈΠΈ Ρ„Π΅Ρ€Ρ€ΠΎΠΌΠ°Π³Π½ΠΈΡ‚Π½ΠΎΠ³ΠΎ рСзонанса

    Effect of alkali reagents on the crystal structure of chemically deposited CoP films

    No full text
    ВСкст ΡΡ‚Π°Ρ‚ΡŒΠΈ Π½Π΅ публикуСтся Π² ΠΎΡ‚ΠΊΡ€Ρ‹Ρ‚ΠΎΠΌ доступС Π² соотвСтствии с ΠΏΠΎΠ»ΠΈΡ‚ΠΈΠΊΠΎΠΉ ΠΆΡƒΡ€Π½Π°Π»Π°.Abstractβ€”The effect alkali reagents have on the crystal structure of CoP films prepared via chemical depo sition is investigated. It is shown that the use of sodium hydrogen carbonate and ammonium hydroxide in low concentrations leads to growth of the hexagonal phase in the films. As the concentration of alkali reagents is increased, the formation of a cubic or amorphous phase is observed

    Influence of solution acidity on growth kinetics, structure and magnetic properties of Co-P films, obtained by chemical deposition

    Get PDF
    The results of studies of the effect of solution acidity on the growth kinetics, structure and magnetic properties of Co-P films obtained by chemical deposition are presented. It was shown that the growth of Co-P films in the low pH region occurs mainly due to the growth of crystallite sizes, and in the high pH region, due to an increase in the nucleation rate. From the analysis of the chemical equilibrium of redox reactions, taking into account the balance of citrate and hydroxyl complexes of Co, a qualitative explanation of the features of the change in the rate and nature of the deposition of Co atoms from pH is proposed

    On Nature of the Induced Anisotropy in the Chemically Deposited Π‘ΠΎβ€’Π  Films

    No full text
    The induced magnetic anisotropy in the Π‘ΠΎβ€’Π films prepared by chemical deposition from liquid solutions in a magnetic field has been investigated. The pronounced difference between the anisotropy values and relaxation times points out the existence of different physical mechanisms responsible for the occurrence of anisotropy of the Π‘ΠΎβ€’Π  films at low and high pH values. Possible mechanisms of the induced anisotropy in the Π‘ΠΎβ€’Π  films prepared at different pH values are discussed

    Synthesis, Microstructure and Magnetic Properties of Soft Magnetic CoP Films

    No full text
    Soft magnetic thin CoP films were obtained by means of chemical metallization from aqueous cobalt salt solution in the presence of sodium hydroxide, citric acid and sodium hypophosphite as the reducing agent. The optimal values of the magnetic film parameters (saturation magnetization and width of ferromagnetic resonance line) were obtained by variation of composition of work solutions. It allows to reduce losses in their application in microwave devices. Microphotographs of magnetic film indicate a grain structure with a grain size of about 50 nm and presence of inclusions with the size of 3-5 nm. To determine the magnetic parameters of the investigated films the method of ferromagnetic resonance (FMR) absorption curves processing is used. The values of FMR line width and an effective magnetization of film material saturation were obtained

    On Nature of the Induced Anisotropy in the Chemically Deposited Π‘ΠΎβ€’Π  Films

    Get PDF
    ВСкст ΡΡ‚Π°Ρ‚ΡŒΠΈ Π½Π΅ публикуСтся Π² ΠΎΡ‚ΠΊΡ€Ρ‹Ρ‚ΠΎΠΌ доступС Π² соотвСтствии с ΠΏΠΎΠ»ΠΈΡ‚ΠΈΠΊΠΎΠΉ ΠΆΡƒΡ€Π½Π°Π»Π°.The induced magnetic anisotropy in the Π‘ΠΎβ€’Π  films prepared by chemical deposition from liquid solutions in a magnetic field has been investigated. The pronounced difference between the anisotropy values and relaxation times points out the existence of different physical mechanisms responsible for the occurrence of anisotropy of the Π‘ΠΎβ€’Π  films at low and high pH values. Possible mechanisms of the induced anisotropy in the Π‘ΠΎβ€’Π  films prepared at different pH values are discussed

    Effect of alkali reagents on the crystal structure of chemically deposited CoP films

    No full text
    ВСкст ΡΡ‚Π°Ρ‚ΡŒΠΈ Π½Π΅ публикуСтся Π² ΠΎΡ‚ΠΊΡ€Ρ‹Ρ‚ΠΎΠΌ доступС Π² соотвСтствии с ΠΏΠΎΠ»ΠΈΡ‚ΠΈΠΊΠΎΠΉ ΠΆΡƒΡ€Π½Π°Π»Π°.Abstractβ€”The effect alkali reagents have on the crystal structure of CoP films prepared via chemical depo sition is investigated. It is shown that the use of sodium hydrogen carbonate and ammonium hydroxide in low concentrations leads to growth of the hexagonal phase in the films. As the concentration of alkali reagents is increased, the formation of a cubic or amorphous phase is observed
    corecore