92 research outputs found
Statistical Models for Stability Analysis in Watermelon
Fourteen promising F1 hybrids of watermelon namely IIHR-188 X IIHR-118, IIHR 114 X IIHR 118 , IIHR 119 X IIHR- 20-1, Arka Manik X IIHR 46, IIHR 43 X IIHR 46, Arka Manik X IIHR-188, Arka Jyothi, NS-295, Kushboo, Madhubala, Apoorva, CWH-7 and Riya were evaluated in experimental plots of Division of Vegetable Crops, Indian Institute of Horticultural Research, Bangalore during 2002-04. Information about biometrical characters such as fruit length (cm), fruit girth (cm), days to first male flower opening&female flower opening, rind thickness(cm) and TSS (%) along with yield (t ha-1), were used to develop stability models to identify stable hybrid(s) for a wide range for cultivation. Stability models thus developed indicated that two hybrids, viz., Arka Jyothi (with yield potential of 75.91 t ha-1) across the years and NS-295 (64.25 t ha-1) were stable for a wide range for cultivation. Statistical measures of stability, viz., regression coefficient, deviation from regression co-efficient and ecovalence measures, were worked out and utilized for grouping of hybrids into different categories based on their cumulative performance over the years
Heterosis and combining ability for yield and its related traits in ridge gourd [Luffa acutangula (L.)Roxb.]
Line × Tester analysis involving three lines and four testers was carried out in ridge gourd [Luffa acutangula (Roxb.) L.]. Significant variation was noticed in the mean performance of the parents and hybrids for all the characters studied except for vine length and fruit girth. The results from GCA and SCA variance indicated the predominance of non-additive gene action for all the traits except fruit girth. Significant heterosis of 177.78% over standard check, Arka Sumeet for fruit weight per plant was expressed by the cross GARG-1 × CO-1. The best general combiners were GARG-1 and Pusa Nutan among the lines, and Jaipur long and CO-1 among testers. Best specific combining ability effects for fruit length and yield (t/ ha) were recorded by the crosses Pusa Nasdar × Arka Sumeet and GARG-1 × CO-1
Genetic Variability and Heritability for Growth and Yield in Cucumber (Cucumis sativus L.)
Quantification of variability is the most essential pre-breeding tool in any crop improvement programme. The present investigation was carried out to assess variability existing in twenty four diverse cucumber genotypes. Results revealed high phenotypic and genotypic coefficient of variation for yield per plant, fruit flesh thickness, number of fruits per plant, number of nodes per plant, number of branches per plant, average fruit weight, internode length and vine length. High heritability, coupled with high genetic advance as per cent mean, was recorded for all the characters studied except days to first female-flower opening, days to 50% flowering and days to first-fruit harvest, indicating a scope for improvement through selection
Genetic variability, correlation and path analysis in bottle gourd (Lagenaria siceraria (Mol. Standl.) germplasm
The present investigation was conducted to determine the variability, heritability, genetic advance and correlation of fruit yield and ten different yield contributing characters in bottle gourd. Wide range of variation was observed for most of the characters like fruit yield/vine, fruit number/vine, fruit weight, fruit yield/ha and node number for first female flower appearance. Phenotypic coefficient of variation was higher than genotypic coefficient of variation for all the traits studied, indicating environmental influence on expression of these characters. However, high heritability (broad sense) along with high genetic advance was recorded by vinelength, branch number, fruit length, fruit width, fruit yield/vine and yield/ha indicating the presence of additive gene effects, hence selection can be employed for the improvement of these parameters. Fruit yield/ ha was significantly and positively associated with fruit number/vine and fruit yield/vine both at genotypic as well as phenotypic levels. Fruit number had maximum direct effect (0.812) on fruit yield/ha followed by fruit weight (0.407), fruit length (0.339), fruit width (0.310), fruit yield/vine (0.249), days taken for first female flower appearance (0.224) and vine length (0.173). Therefore for the yield improvement in bottle gourd, emphasismay be given for indirect selection through fruit parameters like fruit weight, fruit length, fruit number and fruit yield/vine
Studies on Inheritance of Geneic Male Sterility (GMS) and Hybrid Seed Production in Okra [Abelmoschus esculentus (L.) Moench.]
Inheritance of geneic male sterility in GMS line MS-1 of okra [Abelmoschus esculentus (L.) Moench.] was studied using F1, F2 and test-cross generations of crosses between GMS line MS-1 and normal fertile genotypes, and the varieties Arka Anamika, Parbhani Kranti, Arka Abhay, IIHR-108-1-31, IIHR-109-20-6, IIHR-116-23-6, IIHR- 180-6-3, IIHR-161-10-1 and IIHR-130-2-10. All the F1 were found fertile. Segregation of pollen fertility in F2 and test - cross generations involving ms1 was segregated in the ratio 1 fertile: 1 sterile, respectively. This indicated that GMS trait in the line is controlled by a single recessive gene (ms1ms1). Large-scale F1 hybrid seed production in okra becomes rather slow due to the tedious hand-emasculation, followed by hand-pollination, incurring additional labour and cost of F1 seed production. In comparison to fertile lines, this saves approximately 70% time and manual labour. Use of Geneic Male Sterile (GMS) line MS-1 can make F1 hybrid seed production in okra easy and more economical compared to hand-emasculation
Genetic Variability, Correlation and Path Analysis in Ridge Gourd [Luffa acutangula (Roxb.) L.]
The present investigation was made to determine variability, heritability, genetic advance and correlation of fruit yield with 10 yield-contributing traits in ridge gourd. A wide variability was observed for days taken to first female flower appearance, fruit length, fruit number/plant, fruit weight and fruit yield/ha. Phenotypic coefficient of variation was higher than genotypic coefficient of variation for all the traits studied, indicating environmental influence on the expression of these traits. However, high heritability (broad-sense), along with high genetic advance, was recorded in node number at which first female-flower appeared, number of branches, fruit length, number of fruits/plant and fruit weight, indicating presence of additive gene effects. Fruit yield/ha was significantly and positively associated with peduncle length, fruit length, number of fruits/plant (at the phenotypic level), fruit weight and fruit yield/plant. Fruit weight had the highest direct effect (0.847) on fruit yield/ha, followed by fruit yield/plant (0.793), fruit number (0.344), peduncle length (0.237) and number of branches (0.216). Therefore, for yield improvement in ridge gourd, emphasis may be laid on indirect selection using fruit parameters like fruit weight, number of fruits/plant and fruit yield/plant.
 
Development of Novel Character in Okra [Abelmoschus esculentus (L.) Moench]
Transgressive segregation in the population of IIHR-31-1-2 x Arka Anamika BC3 F1-F6 generations led to the development of, various novel characters such as, ridgeless fruits (round fruit) and enhanced nodal productivity bearing short internodal length in okra selection-1, which was found to be promising for cultivation with high yield and good fruit quality. It can be grown both during Kharif and summer seasons. Okra selection-1 was also found to exhibit smooth fruits, high yield potential with sturdy plant habit and field tolerance to fusarium wilt and YVMV. Due to rapid rate of increase of processing in okra by freezing and canning, Okra selection I may be an ideal fruit type for freezing because of its short, smooth, dark green and round or multifaceted fruits with low mucilage content
All‐Rounder Low‐Cost Dopant‐Free D‐A‐D Hole‐Transporting Materials for Efficient Indoor and Outdoor Performance of Perovskite Solar Cells
A novel biphenyl fumaronitrile as an acceptor and triphenylamine as donor conjugated building blocks are used for the first time to successfully synthesize donor–acceptor–donor molecule (D-A-D) 2,3-bis(4′-(bis(4-methoxyphenyl)amino)-[1,1′-biphenyl]-4-yl)fumaronitrile (TPA-BPFN-TPA). The new TPA-BPFN-TPA with low-lying HOMO is used as a dopant-free hole-transporting material (HTM) in mesoporous perovskite solar cells. The performance of the solar cells using this new HTM is compared with the traditional 2,2′,7,7′-tetrakis(N,N′-di-p-methoxyphenylamino)- 9,9′-spirobifluorene (Spiro-OMeTAD) HTM based devices for outdoor and indoor performance evaluation. Under 1 sun illumination, dopant-free TPA-BPFN-TPA HTM based devices exhibit a power conversion efficiency (PCE) of 18.4%, which is the record efficiency to date among D-A-D molecular design based dopant-free HTMs. Moreover, the stability of unencapsulated TPA-BPFN-TPA-based devices shows improvement over Spiro-OMeTAD-based devices in harsh relative humidity condition of 70%. Another exciting feature of the newly developed HTM is that the TPA-BPFN-TPA-based devices exhibit improved PCE of 30% and 20.1% at 1000 lux and 200 lux illuminations, respectively. This new finding provides a solution to fabricate low indoor (low light) and outdoor (1 sun) perovskite solar cell devices with high efficiency for cutting-edge energy harvesting technology.</p
Photoelectrocatalytic Surfactant Pollutant Degradation and Simultaneous Green Hydrogen Generation
For the first time, we demonstrate a photoelectrocatalysis technique for simultaneous surfactant pollutant degradation and green hydrogen generation using mesoporous WO/BiVO photoanode under simulated sunlight irradiation. The materials properties such as morphology, crystallite structure, chemical environment, optical absorbance, and bandgap energy of the WO/BiVO films are examined and discussed. We have tested the anionic type (sodium 2-naphthalenesulfonate (S2NS)) and cationic type surfactants (benzyl alkyl dimethylammonium compounds (BAC-C12)) as model pollutants. A complete removal of S2NS and BAC-C12 surfactants at 60 and 90 min, respectively, by applying 1.75 V applied potential vs RHE to the circuit, under 1 sun was achieved. An interesting competitive phenomenon for photohole utilization was observed between surfactants and adsorbed water. This led to the formation of HO from water alongside surfactant degradation (anode) and hydrogen evolution (cathode). No byproducts were observed after the direct photohole mediated degradation of surfactants, implying its advantage over other AOPs and biological processes. In the cathode compartment, 82.51 μmol/cm and 71.81 μmol/cm of hydrogen gas were generated during the BAC-C12 and S2NS surfactant degradation process, respectively, at 1.75 V RHE applied potential
Jet nebulizer-spray coated CZTS film as Pt-free electrocatalyst in photoelectrocatalytic fuel cells
The copper zinc tin sulphide (CZTS) is a promising p-type earth abundant alloy that received profound attention as an electron driven dark catalyst in electrocatalytic reduction reactions. In particular, the photoelectrocatalysis based solar fuel cell encompass with inexpensive electrocatalyst (hydrogen evolution reaction) is anticipated to support to reduce the overall system cost. However, demonstrating CZTS as Pt-free counter electrode in photoelectrocatalytic fuel cells is scarce. Because, achieving high electronic conductivity, favourable (1 1 2) crystalline structure towards high electrocatalytic property through low cost vacuum-free technique is remains challenge. In this report, we demonstrate p-type CZTS film fabrication at different processing temperature (250, 300, and 350 °C) using jet nebulizer spray (JNS) coating technique. The processing temperature play a key role on crystalline property, composition, and catalytic activity of CZTS. The x-ray diffraction and energy dispersive analysis results reveals that the CZTS film prepared 250 °C exhibit kesterite structure oriented in (1 1 2) direction. The electrocatalytic reduction property of as-synthesised CZTS electrodes in water reduction process is tested in aqueous 1 M NaOH solution. Among the different temperature processed films, CZTS prepared at 250 °C result high electrocatalytic reduction activity ∼-2.1 mA cm−2 at -0.44 V vs Ag/AgCl. In addition, these film exhibits high electrical conductivity than that of other CZTS samples. Therefore, optimised CZTS 250 °C film is further examined in hydrogen peroxide (H2O2) reduction which result enhanced electrical current generation after adding the 1 M of hydrogen peroxide in PBS electrolyte based electrochemical cell. This encouraged to apply as Pt-free counter electrode in H2O2 electrolyte based photoelectrocatalytic fuel cells. The PEC cells encompass with TiO2 nanowire photoelectrode, and CZTS-250 °C counter electrode showed feasible photocurrent generation compared to conventional Pt counter electrode. This proof-of-concept type Pt-free PEC cells leads to open new paths in implementing wide-range of semiconductor based electrocatalyst to support in development of low-cost photoelectrocatalytic fuel cells
- …