Dynamics of Phase Separation in Poly(acrylonitrile-butadiene-styrene)-Modified Epoxy/DDS System: Kinetics and Viscoelastic Effects

The dynamics of phase separation and final morphologies of poly(acrylonitrile-butadiene-styrene) (ABS)-modified epoxy system based on diglycidyl ether of bisphenol A (DGEBA) cured with 4,4'-diaminodiphenylsulfone (DDS) have been monitored in situ throughout the entire curing process by using optical microscopy (OM), differential scanning calorimetry (DSC), rheometry, and small-angle laser light scattering (SALLS). The evolution of phase separation and final morphologies with substructures were explored by OM. The final morphologies of the blend cured at 150 and 165 degrees C are of phase-inverted type and are quite different from the final morphologies of the same blend cured at 180 degrees C, in which the final morphologies are cocontinuous. AFM observations of the fully cured sample confirmed the existence of three different phases, the epoxy continuous phase, SAN (styrene/acrylonitrile) continuous phase, and PB droplets at the interface, with a strong tendency to stay at SAN continuous phase. Furthermore, the continuous epoxy phase contains SAN particles and the continuous SAN phase contains epoxy particles. Cure kinetics and rheological results correspond well with the viscoelastic phase separation revealed by OM. The SALLS results display clearly that the phase separation takes place according to nucleation and growth mechanism followed by spinodal decomposition. The development of light scattering patterns during the second stage phase separation follows the Cahn-Hilliard model of spinodal demixing. Furthermore, the evolution of the scattering vector follows a Maxwell-type relaxation equation establishing the viscoelastic behavior of phase separation. The relaxation time of phase separation can be described by the Williams-Landel-Ferry equation for viscoelasticity. As a whole, the dependence of phase separation on cure temperature and the development of final morphologies and the associated mechanisms were explored in detail for the complex epoxy/ABS system

Free volume in ionic liquids: a connection of experimentally accessible observables from PALS and PVT experiments with the molecular structure from XRD data

In the current work, free volume concepts, primarily applied to glass formers in the literature, were transferred to ionic liquids (ILs). A series of 1-butyl-3-methylimidazolium ([C4MIM](+)) based ILs was investigated by Positron Annihilation Lifetime Spectroscopy (PALS). The phase transition and dynamic properties of the ILs [C4MIM][X] with [X](-) = [Cl](-), [BF4](-), [PF6](-), [OTf](-), [NTf2](-) and [B(hfip)(4)](-) were reported recently (Yu et al., Phys. Chem. Chem. Phys., 2012, 14, 6856-6868). In this subsequent work, attention was paid to the connection of the free volume from PALS (here the mean hole volume, ) with the molecular structure, represented by volumes derived from X-ray diffraction (XRD) data. These were the scaled molecular volume V-m,V-scaled and the van der Waals volume V-vdw. Linear correlations of at the "knee'' temperature ((T-k)) with V-m,V-scaled and V-vdw gave good results for the [C4MIM](+) series. Further relationships between volumes from XRD data with the occupied volume V-occ determined from PALS/PVT (Pressure Volume Temperature) measurements and from Sanchez-Lacombe Equation of State (SL-EOS) fits were elaborated (V-occ(SL-EOS) approximate to 1.63 V-vdw, R-2 = 0.981 and V-occ(SL-EOS) approximate to 1.12 V-m,V-scaled, R-2 = 0.980). Finally, the usability of V-m,V-scaled was justified in terms of the Cohen-Turnbull (CT) free volume theory. Empirical CT type plots of viscosity and electrical conductivity showed a systematic increase in the critical free volume with molecular size. Such correlations allow descriptions of IL properties with the easily accessible quantity V-m,V-scaled within the context of the free volume

Morphology, thermo-mechanical properties and surface hydrophobicity of nanostructured epoxy thermosets modified with PEO-PPO-PEO triblock copolymer

In this paper, we report on the effect of amphiphilic poly(ethylene oxide)-poly(propylene oxide)poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer (TBCP) on the miscibility, phase separation, thermomechanical properties and surface hydrophobicity of diglycidyl ether of bisphenol-A (DGEBA)/4,4'-diaminodiphenylmethane (DDM) system. The blends were nanostructured. The phase separation occurred via self-assembly of PPO blocks followed by the reaction induced phase separation of PEO blocks. The surface roughness increased with increase in concentration of TBCP due to increased phase separation of PEO blocks at higher concentration. The phase separated PEO blocks formed the crystalline phase in the amorphous crosslinked epoxy matrix. The TBCP has a strong plasticizing effect on the matrix and decreased the glass transition temperature (T-g) and modulus of the thermoset. The incorporation of TBCP improved impact strength and tensile properties and 5 phr TBCP content was found to be optimum to achieve balanced mechanical performance. Moreover, the thermal stability of the epoxy system was retained while hydrophobicity was improved in the presence of TBCP. (C) 2017 Elsevier Ltd. All rights reserved