Nanocomposites Based on Thermoplastic Polyester Elastomers

The use of fillers in order to enhance the properties of polymers has been already well documented. Fundamentally, traditional fillers were applied to reduce the cost of the final polymeric products. Moreover, most micron-sized fillers required high loading for slight properties enhancement, thus causing problems in processing and melt flow due to the high viscosity of the obtained composite. Nanofillers might constitute the answer to the requirements made to the modern polymer materials. Nanofillers in the range of 3–5 wt% achieve the same reinforcement as 20–30 wt% of micron-sized fillers. Therefore, this study presents the influence of three different types of nanofillers that differ in shape (aspect ratio) on the morphology, electrical conductivity, and thermal stability of polyester thermoplastic elastomer (TPE) matrix, by means of poly(trimethylene)-block-poly(tetramethylene oxide) copolymer (PTT-PTMO). The morphology in this copolymer consisted of semicrystalline PTT domains dispersed in the soft phase of amorphous, noncrystallisable PTMO. The PTT-PTMO copolymer has been combined with 0.5 wt% of 1D (single-walled carbon nanotubes (SWCNTs), silicon carbide (SiC) nanofibers), 2D (graphene oxide (GO), graphene nanoplatelets (GNPs)), and 3D (polyhedral oligomeric silsesquioxane (POSS)) through in situ synthesis to obtain nanocomposites (NCs) samples

Thin polymer films based on poly(vinyl alcohol) containing graphene oxide and reduced graphene oxide with functional properties

10 pags., 7 figs., 2 tabs.In this article, the effect of the addition of graphene oxide (GO) and reduced graphene oxide (rGO) on the mechanical properties, thermal stability, and electrical conductivity of polyvinyl alcohol (PVA) has been investigated. Different weight percentages of nanofillers ranging from 0.5 to 5 wt% have been combined with PVA. The ultrasonic technique has been applied to disperse nanofillers in the PVA solution. The nanocomposite films have been prepared via solution casting technique and the dispersion of nanofillers into the PVA has been studied through optical microscopy. The microstructure, crystallization behavior, and interfacial interaction were characterized through X-ray diffraction and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been applied to study the thermal properties of the prepared nanocomposites. The DSC results revealed that the crystallization temperature and melting temperature were enhanced in the presence of GO nanofiller. Besides, the tensile strength at break was improved along with the addition of GO; however, elongation at break for PVA/GO and PVA/rGO was diminished. Moreover, all specimens showed insulating behavior and the only sample was electrically conducting, which contain a high amount of rGO (5 wt%).Spanish Ministry of Science and Innovation, Grant/Award Number:PID2019-107514GB-I0

Modification of substandard EPDM with amorphous thermoplastic polyesters (PETG and PEF): microstructure and physical properties

The phase morphology, thermal behavior and mechanical properties of two series of polymer blends based on ethylene/propylene/diene rubber (EPDM) and amorphous homologues of poly(ethylene terephthalate), i.e. glycol modified poly(ethylene terephthalate) (PETG) and poly(ethylene furanoate) (PEF), were investigated. The morphology of the blends shows a two phase structure in which the minor phase (amorphous polyester) is dispersed as domains in the major (EPDM) continuous matrix phase. Differential calorimetry studies confirmed that both systems were immiscible and exhibits two glass transitions. The melting peak area of EPDM in the blends decreased as the amount of the other component increased. The values of stress at strain of 100% were improved upon the increasing content of PETG in EPDM system, while only slight decrease of this value was observed. Moreover, the strong improvement of hardness and thermo-oxidative stability along with an increasing content of amorphous polyester phase was reported

Phase Separation and Elastic Properties of Poly(Trimethylene Terephthalate)-block-poly(Ethylene Oxide) Copolymers

A series of poly(trimethylene terephthalate)-block-poly(ethylene oxide) (PTT-b-PEOT) copolymers with different compositions of rigid PTT and flexible PEOT segments were synthesized via condensation in the melt. The influence of the block length and the block ratio on the micro-separated phase structure and elastic properties of the synthesized multiblock copolymers was studied. The PEOT segments in these copolymers were kept constant at 1130, 2130 or 3130 g/mol, whereas the PTT content varied from 30 up to 50 wt %. The phase separation was assessed using differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The crystal structure of the synthesised block copolymers and their microstructure on the manometer scale was evaluated by using WAXS and SAXS analysis. Depending on the PTT/PEOT ratio, but also on the rigid and flexible segment length in PTT-b-PEO copolymers, four different domains were observed i.e.,: a crystalline PTT phase, a crystalline PEO phase (which exists for the whole series based on three types of PEOT segments), an amorphous PTT phase (only at 50 wt % content of PTT rigid segments) and an amorphous PEO phase. Moreover, the elastic deformability and reversibility of PTT-b-PEOT block copolymers were studied during a cyclic tensile test. Determined values of permanent set resultant from maximum attained stain (100% and 200%) for copolymers were used to evaluate their elastic properties

Polymer Composite Manufacturing by FDM 3D Printing Technology

3D printing technology was developed nearly 30 years ago. One of its characteristics is that instead of removing materials, 3D printing creates 3D elements directly from CAD models, adding one layer of material on another. This offers a beneficial capability of making complex elements in terms of shape and materials, impossible to be manufactured by traditional methods. Owing to intensive research in recent years, considerable progress has been achieved in the development and commercialisation of new innovative processes of 3D printing by fused deposition modeling (FDM), including printing of composite materials. The study outlines the main methods of creating polymer composite structures using FDM technology

Polymer Composite Manufacturing by FDM 3D Printing Technology

3D printing technology was developed nearly 30 years ago. One of its characteristics is that instead of removing materials, 3D printing creates 3D elements directly from CAD models, adding one layer of material on another. This offers a beneficial capability of making complex elements in terms of shape and materials, impossible to be manufactured by traditional methods. Owing to intensive research in recent years, considerable progress has been achieved in the development and commercialisation of new innovative processes of 3D printing by fused deposition modeling (FDM), including printing of composite materials. The study outlines the main methods of creating polymer composite structures using FDM technology

The Role of Interfacial Interactions on the Functional Properties of Ethylene–Propylene Copolymer Containing SiO2 Nanoparticles

In this paper, the mechanical properties, thermal stability, and transparency of ethylene–propylene copolymer (EPC) elastomer modified with various weight percentages (1, 3, and 5 wt.%) of SiO2 nanofillers have been studied. The nanocomposites were prepared via a simple melt mixing method. The morphological results revealed that the nanofillers were uniformly dispersed in the elastomer, where a low concentration of SiO2 (1 wt.%) had been added into the elastomer. The FTIR showed that there are interfacial interactions between EPC matrix and silanol groups of SiO2 nanoparticles. Moreover, by the addition of 1 wt.% of SiO2 in the EPC, the tensile strength and elongation at break of EPC increased by about 38% and 27%, respectively. Finally, all samples were optically transparent, and the transparency of the nanocomposites reduced by increasing the content of SiO2 nanoparticles

Hytrel-like Copolymers Based on Furan Polyester: The Effect of Poly(Butylene Furanoate) Segment on Microstructure and Mechanical/Elastic Performance

This paper aims to compare the performance of two Hytrel-like segmented copolymers: “classic” PBT-b-PTMG and fully bio-based PBF-b-PTMG, containing poly(butylene furanoate) as the rigid segment. The idea behind this research is to assess whether the sustainable copolymers can successfully replace those “classic” once at the thermoplastic elastomers’ market. Two series of copolymers were synthesized under the same process parameters, had the same compositions, but differed in aromatic ring structure in terephthalate/furanoate unit. Furthermore, the materials were processed by injection moulding as typical Hytrel products. Then, the samples were subjected to extensive characterisation including NMR, GPC, FTIR, DSC, WAXS, DMTA, TGA techniques and mechanical tests with particular interest in the microstructure formed during processing and its effect on the copolymers’ mechanical and elastic behaviour. The detailed analysis proved that PBF-b-PTMG and PBT-b-PTMG copolymers represent two kinds of materials with similar chemical structure, some features of thermoplastic elastomers, but evident differences in their physical properties

Effect of Halloysite Nanotube on Mechanical Properties, Thermal Stability and Morphology of Polypropylene and Polypropylene/Short Kenaf Fibers Hybrid Biocomposites

In this article, the effect of the addition of halloysite nanotube (HNT) on the mechanical and thermal stability of polypropylene (PP) and PP/kenaf fiber biocomposites has been investigated. Different volume contents of HNTs ranging from 1 to 10 vol.% were melt mixed with PP and PP/kenaf fibers. The volume content of kenaf fibers was kept constant at 30%. The morphology of HNTs within the PP matrix has been studied via scanning electron microscopy (SEM). The morphological results revealed that HNT was uniformly dispersed in the PP matrix already at a low concentration of 1 and 2 vol.%. The mechanical properties of the manufactured nanocomposites and hybrid biocomposites such as Young’s modulus, tensile strength, elongation at break, flexural modulus, flexural strength, and notched Izod strength have been measured. The results show that Young’s modulus and strengths have been improved along with the addition of low content of HNTs. Moreover, the gain of notched Izod impact strength obtained by the addition of short kenaf fibers was maintained in hybrids with low concentrations of HNTs. Finally, the thermogravimetric analysis shows that at 10% and 50% weight loss, the thermal degradation rate of the PP and PP/kenaf biocomposites decreased by the addition of HNTs