Fiber Bragg Grating sensors for deformation monitoring of GEM foils in HEP detectors

Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide Gas Electron Multiplier (GEM) foils of the GE1/1 chambers of the Compact Muon Solenoid (CMS) experiment at Large Hadron Collider (LHC) of CERN. A network of FBG sensors has been used to determine the optimal mechanical tension applied and to characterize the mechanical stress applied to the foils. The preliminary results of the test performed on a full size GE1/1 final prototype and possible future developments will be discussed.Comment: Four pages, seven figures. Presented by Michele Caponero at IWASI 2015, Gallipoli (Italy

In situ polymerization of soil organic matter by oxidative biomimetic catalysis.

Background: Agricultural practices that enhance organic matter content in soil can play a central role in sequestering soil organic carbon (SOC) and reducing greenhouse gases emissions. Methods: We used a water-soluble iron-porphyrin to catalyze directly in situ oxidative polymerization of soil organic matter in the presence of H2O2 oxidant, with the aim to enhance OC stabilization, and, consequently, reduce CO2 emissions from soil. The occurred SOC stabilization was assessed by monitoring soil aggregate stability, OC distribution in water-soluble aggregates, soil respiration, and extraction yields of humic and fulvic acids. Results: Soil treatment with H2O2 and iron-porphyrin increased the physical stability of water-stable soil aggregates and the total OC content in small aggregates, thereby suggesting that the catalyzed oxidative polymerization increased OC in soil and induced a soil physical improvement. The significant reduction of CO2 respired by the catalyst- and H2O2-treated soil indicated an enhanced resistance of polymerized SOC to microbial mineralization. The catalyzed oxidative polymerization of SOC also significantly decreased the extraction yields of humic and fulvic acids from soil. Conclusions: The oxidative catalytic technology described here may become an efficient agricultural practice for OC sequestration in soils and contribute to mitigate global changes

Neural Biclustering in Gene Expression Analysis

Clustering in high dimensional spaces is a very difficult task. Dealing with DNA microarrays is even more difficult because gene subsets are coregulated and coexpressed only under specific conditions. Biclusterng addresses the problem of finding such submanifolds by exploiting both gene and condition (tissue) clustering. The paper proposes a self-organizing neural network, GH EXIN, which builds a hierarchical tree by adapting its architecture to data. It is integrated in a framework in which gene and tissue clustering are alternated and controlled by the quality of the bicluster. Examples of the approach and a biological validation of results are also given

Research Evidence and Implications on Migration Phenomena in Europe

This book provides a summary overview of the activities carried out by the Diversity and Migration Lab, which was set up within the scope of the FORTHEM international Alliance (Fostering Outreach within European Regions, Transnational Higher Education and Mobility), and concluded in September 2022

Cms gem detector material study for the hl-lhc

A study on the Gaseous Electron Multiplier (GEM) foil material is performed to determine the moisture diffusion rate, moisture saturation level and the effects on its mechanical properties. The study is focused on the foil contact with ambient air and moisture to determine the value of the diffusion coefficient of water in the foil material. The presence of water inside the detector foil can determine the changes in its mechanical and electrical properties. A simulated model is developed with COMSOL Multiphysics v. 4.3 [1] by taking into account the real GEM foil (hole dimensions, shapes and material), which describes the adsorption of water. This work describes the model, its experimental verification, the water diffusion within the entire sheet geometry of the GEM foil, thus gaining concentration profiles and the time required to saturate the system and the effects on the mechanical properties

Performance of Optically Readout GEM-based TPC with a 55Fe source

Optical readout of large Time Projection Chambers (TPCs) with multiple Gas Electron Multipliers (GEMs) amplification stages has shown to provide very interesting performances for high energy particle tracking. Proposed applications for low-energy and rare event studies, such as Dark Matter search, ask for demanding performance in the keV energy range. The performance of such a readout was studied in details as a function of the electric field configuration and GEM gain by using a $^{55}$Fe source within a 7 litre sensitive volume detector developed as a part of the R\&D for the CYGNUS project. Results reported in this paper show that the low noise level of the sensor allows to operate with a 2~keV threshold while keeping a rate of fake-events lesser than 10 per year. In this configuration, a detection efficiency well above 95\% along with an energy resolution ($\sigma$) of 18\% is obtained for the 5.9 keV photons, demonstrating the very promising capabilities of this technique

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

Gas detectors for elementary particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This work studies properties of potential eco-friendly gas replacements by computing the physical and chemical parameters relevant for use as detector media, and suggests candidates to be considered for experimental investigation

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.Comment: 38 pages, 9 figures, 8 tables. To be submitted to Journal of Instrumentatio