86 research outputs found

    Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes

    Get PDF
    Carbon nanotubes represent new emergent multifunctional materials that have potential applications for structural and electrically conductive composites. In the current paper we present a suitable technique for the integration of Double Walled Carbon Nanotubes (DWCNTs) in a unidirectional Carbon Fiber Reinforced Polymer (CFRP) with high volume content of carbon fiber. We showed that the electrical conductivity of the laminates versus temperature follows a non-linear variation which can be well described by the Fluctuation-Induced Tunneling Conduction (FITC) model. The parameters of this model for CFRP/ DWCNTs and CFRP without DWCNTs were determined using best fit curves of the experimental data. This study has shown that DWCNTs have strong influence in the conductivity through laminate thickness. However, there are no significant effects on the electrical conductivity measured in the other two principle directions of the composite laminate. Furthermore, it was found that electron conduction mechanism of carbon fibers is dominated by the FITC

    Mechanical improvement of P(VDF-TrFE)/nickel nanowires conductive nanocomposites: Influence of particles aspect ratio

    Get PDF
    Nickel nanowires with high aspect ratio (250) were elaborated and incorporated into poly(vinylidene difluoride-trifluoroethylene) up to 30 vol% via solvent mixing way. These nanocomposites are characterized by a conductive behavior with a high electrical conductivity value (102 S m−1) above a very low percolation threshold (0.75 vol% of metallic nanowires). The introduction of nanowires strongly depressed the matrix crystallinity. Static and dynamic mechanical analysis have been realized at low nanowire volume fraction (< 10 vol%). Below 5 vol% of nanowires, nanocomposites remain ductile. The dynamic mechanical properties are related to the volume fraction of nanowires. A strong increase of the viscoelastic contribution related to the increase of the percentage of amorphous phase is observed. The major effect is the increase of the rubbery modulus. The highest increase of 300% is obtained for only 5 vol% of nanowires; it represents an original mechanical result for low filled composites. The dependence versus nanowire content has been described by adapting the Halpin–Tsai model to high aspect ratio filler. Metallic nanowires create additional entanglements that are randomly distributed in the rubbery polymeric matrix. With their low percolation threshold, metallic nanowires based nanocomposites constitute a new class of multifunctional materials with a high conductivity associated with a ductile polymer matrix characterized by a high rubbery modulus

    Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes

    Get PDF
    An increase and homogenization of electrical conductivity is essential in epoxy carbon fiber laminar aeronautical composites. Dynamic conductivity measurements have shown a very poor transversal conductivity. Double wall carbon nanotubes have been introduced into the epoxy matrix to increase the electrical conductivity. The conductivity and the degree of dispersion of carbon nanotubes in epoxy matrix were evaluated. The epoxy matrix was filled with 0.4 wt.% of CNTs to establish the percolation threshold. A very low value of carbon nanotubes is crucial to maintain the mechanical properties and avoid an overload of the composite weight. The final carbon fiber aeronautical composite realized with the carbon nanotubes epoxy filled was studied. The conductivity measurements have shown a large increase of the transversal electrical conductivity. The percolative network has been established and scanning electron microscopy images confirm the presence of the carbon nanotube conductive pathway in the carbon fiber ply. The transversal bulk conductivity has been homogenized and improved to 10−1 S·m−1 for a carbon nanotubes loading near 0.12 wt.%

    Low filled conductive P(VDF-TrFE) composites: Influence of silver particles aspect ratio on percolation threshold from spheres to nanowires

    Get PDF
    Polymer composites filled with silver nanowires enable the highest value of electrical conductivity known up to now in the case of conductive nanoparticle dispersion with a percolation threshold less than 1 vol%. Silver nanowires with high aspect ratio were elaborated by two types of synthesis: electrochemical deposition in a template and polyol synthesis. For the first time the influence of each kind of nanowires in composites was studied and compared to spherical nanoparticles as reference. The value of percolation threshold and conductivity level above the percolation threshold were measured and compared. These silver nanowires were introduced into poly(vinylidenedifluoride-trifluoroethylene) in comparison to spherical silver nanoparticles. The preparation method modified the effective aspect ratio of nanowires. The low percolation threshold and the microscopy observations confirmed the good dispersion of nanowires in composites. The lowest percolation threshold was determined in the case of the polyol synthesis nanowires (0.63 vol%) in comparison with electrochemical deposited nanowires (2.2 vol%). The level of conductivity above the percolation threshold obtained with each kind of particles is in the same range near 100 S.m− 1. The value of electrical conductivity obtained above the percolation threshold is unusual at this low content of conductive filler and is observed for the first time in a conductive polymer composite

    THE EVOLUTION OF FARMING SYSTEMS IN NORTHERN COTE D'IVOIRE: BOSERUP VERSUS MALTHUS AND COMPETITION VERSUS COMPLEMENTARITY

    Get PDF
    A socio-economic analysis of a sample of farms in Northern Cote d'Ivoire revisits two debates about the evolution of farming systems in sub-Saharan Africa. Taking into account the diversity of farming systems, the debates "Boserup vs. Malthus" and "competition vs. complementarity" between cotton and food crops become better informed and less straightforward.International Development, Production Economics,

    Optical properties of metallic nanowires by valence electron energy loss spectroscopy

    Get PDF
    The determination of intrinsic conductivity of nanowires (NWs) is essential to understand the charge transport behaviour involved in hybrid nanocomposites. These high conductive metallic fillers are good candidate to improve electrical properties of composites in aeronautic industry. The main difficulty is often to achieve the combination of both high spatial resolution and information on the physical properties as electrical conductivity. One of the suitable methods to give the desired information is electron energy loss spectroscopy (EELS) in scanning transmission electron microscopy (STEM) mode, especially in the low-loss region. This is demonstrated by studying the nickel and gold nanowire

    Structural and electrical properties of gold nanowires/P(VDF-TrFE) nanocomposites

    Get PDF
    High aspect ratio gold nanowires were uniformly dispersed into a poly(vinylidene difluoride–trifluoroethylene) [P(VDF-TrFE)] matrix. The nanowires were synthesized by electrodeposition using nanoporous anodic alumina oxide templates. The intrinsic optical conductivity of the gold nanowires was determined by valence electron energy loss spectroscopy. The effect of increasing volume fraction of Au nanowires on the morphology and crystallization of P(VDF-TrFE) matrix was investigated by differential scanning calorimetry. The crystallinity of P(VDF-TrFE) is strongly depressed by the randomly dispersed nanowires. Above 30 vol% the crystallization of P(VDF-TrFE) is suppressed. The bulk electrical conductivity of nanocomposite films, at room temperature, obeys a percolation behaviour at a low threshold of 2.2 vol% and this was confirmed using the surface resistivity value. An electrical conductivity of 100 S m−1 is achieved for a 3 vol% filler content

    Carbon nanotubes and silver flakes filled epoxy resin for new hybrid conductive adhesives

    Get PDF
    Combining conductive micro and nanofillers is a new way to improve electrical conductivity. Micrometric silver flakes and nanometric carbon nanotubes (CNTs) exhibit high electrical conductivity. A new type of hybrid conductive adhesives filled with silver flakes and carbon nanotubes (DWCNTs or MWCNTs) were investigated. High electrical conductivity is measured as well as improved mechanical properties at room temperature. Small agglomerates and free MWCNTs dispersed in the silver/epoxy composites improve the electrical conductivity and a synergistic effect between MWCNTs and micro sized silver flakes is observed in hybrid composites. Glassy and rubbery storage moduli of the hybrid composites increase with increasing silver loading at fixed CNTs volume fraction. High value of the storage modulus, measured in DWCNTs/μAg hybrid composites at rubbery state, is caused by strong agglomeration of DWCNTs bundles. The electrical and mechanical properties are consistent with the morphologies of the hybrid composites characterized by SEM

    Spin state dependence of electrical conductivity of spin crossover materials

    Get PDF
    We studied the spin state dependence of the electrical conductivity of the spin crossover compound [Fe(Htrz)2(trz)](BF4) (Htrz = 1H-1,2,4-triazole) by means of dc electrical measurements. The low spin state is characterized by higher conductance and lower thermal activation energy of the conductivity, when compared to the high spin state
    corecore