Quantum oscillations and a non-trivial Berry phase in the noncentrosymmetric superconductor BiPd

We report the measurements of de Haas-van Alphen (dHvA) oscillations in the noncentrosymmetric superconductor BiPd. Several pieces of a complex multi-sheet Fermi surface are identified, including a small pocket (frequency 40 T) which is three dimensional and anisotropic. From the temperature dependence of the amplitude of the oscillations, the cyclotron effective mass is ($0.18$ $\pm$ 0.1) $m_e$. Further analysis showed a non-trivial $\pi$-Berry phase is associated with the 40 T pocket, which strongly supports the presence of topological states in bulk BiPd and may result in topological superconductivity due to the proximity coupling to other bands.Comment: 5 pages, 3 figure

Autonomous Light Management in Flexible Photoelectrochromic Films Integrating High Performance Silicon Solar Microcells

Commercial smart window technologies for dynamic light and heat management in building and automotive environments traditionally rely on electrochromic (EC) materials powered by an external source. This design complicates building-scale installation requirements and substantially increases costs for applications in retrofit construction. Self-powered photoelectrochromic (PEC) windows are an intuitive alternative wherein a photovoltaic (PV) material is used to power the electrochromic device, which modulates the transmission of the incident solar flux. The PV component in this application must be sufficiently transparent and produce enough power to efficiently modulate the EC device transmission. Here, we propose Si solar microcells (μ-cells) that are i) small enough to be visually transparent to the eye, and ii) thin enough to enable flexible PEC devices. Visual transparency is achieved when Si μ-cells are arranged in high pitch (i.e. low-integration density) form factors while maintaining the advantages of a single-crystalline PV material (i.e., long lifetime and high performance). Additionally, the thin dimensions of these Si μ-cells enable fabrication on flexible substrates to realize these flexible PEC devices. The current work demonstrates this concept using WO₃ as the EC material and V₂O₅ as the ion storage layer, where each component is fabricated via sol-gel methods that afford improved prospects for scalability and tunability in comparison to thermal evaporation methods. The EC devices display fast switching times, as low as 8 seconds, with a modulation in transmission as high as 33%. Integration with two Si μ-cells in series (affording a 1.12 V output) demonstrates an integrated PEC module design with switching times of less than 3 minutes, and a modulation in transmission of 32% with an unprecedented EC:PV areal ratio

Nanofluid Optical Property Characterization: Towards Efficient Direct Absorption Solar Collectors

Suspensions of nanoparticles (i.e., particles with diameters \u3c 100 nm) in liquids, termed nanofluids, show remarkable thermal and optical property changes from the base liquid at low particle loadings. Recent studies also indicate that selected nanofluids may improve the efficiency of direct absorption solar thermal collectors. To determine the effectiveness of nanofluids in solar applications, their ability to convert light energy to thermal energy must be known. That is, their absorption of the solar spectrum must be established. Accordingly, this study compares model predictions to spectroscopic measurements of extinction coefficients over wavelengths that are important for solar energy (0.25 to 2.5 mu m). A simple addition of the base fluid and nanoparticle extinction coefficients is applied as an approximation of the effective nanofluid extinction coefficient. Comparisons with measured extinction coefficients reveal that the approximation works well with water-based nanofluids containing graphite nanoparticles but less well with metallic nanoparticles and/or oil-based fluids. For the materials used in this study, over 95% of incoming sunlight can be absorbed (in a nanofluid thickness \u3e= 10 cm) with extremely low nanoparticle volume fractions - less than 1 x 10(-5), or 10 parts per million. Thus, nanofluids could be used to absorb sunlight with a negligible amount of viscosity and/or density (read: pumping power) increase

Solar power windows: Connecting scientific advances to market signals

Recent materials advances have enabled researchers to envision and develop highly efficient, partially transparent photovoltaic (PV) prototypes, exposing a potentially large and untapped market for solar energy: building integrated (BI) solar powered windows. In this perspective, we assess the case for market deployment of BIPV windows, specifically intended for commercial U.S. high-rise buildings. Research and development on solar powered windows has been predicated on the hypothesis that sunlight-to-electrical power conversion efficiency (PCE) and device cost per unit area are the key figures of merit that might drive market adoption. Here we investigate the market landscape and desirability for solar powered windows by identifying and evaluating the customer needs for the commercial high-rise building window market. In the course of this assessment, we performed 150 interviews with experts across the value chain for commercial windows. We found that the market forces are complicated by a misalignment of incentives between the end users of BIPV windows and the key decision makers for building projects that could incorporate this technology. Our assessment leads us to frame new figures of merit for BIPV windows that address the underlying needs of prospective customers as well as technical metrics for energy generation. We finally discuss one possible direction for BIPV window technology in which photovoltaics are integrated with switchable windows. Here, the integrated PV converts visible and infrared light transmission into useable electricity enabling standalone, self-powered active windows that can potentially address market needs for smart windows, thereby enabling a pathway for BIPV window deployment

Nanofluid-Based Direct Absorption Solar Collector

Solar energy is one of the best sources of renewable energy with minimal environmental impact. Direct absorption solar collectors have been proposed for a variety of applications such as water heating; however the efficiency of these collectors is limited by the absorption properties of the working fluid, which is very poor for typical fluids used in solar collectors. It has been shown that mixing nanoparticles in a liquid (nanofluid) has a dramatic effect on the liquid thermophysical properties such as thermal conductivity. Nanoparticles also offer the potential of improving the radiative properties of liquids, leading to an increase in the efficiency of direct absorption solar collectors. Here we report on the experimental results on solar collectors based on nanofluids made from a variety of nanoparticles (carbon nanotubes, graphite, and silver). We demonstrate efficiency improvements of up to 5% in solar thermal collectors by utilizing nanofluids as the absorption mechanism. In addition the experimental data were compared with a numerical model of a solar collector with direct absorption nanofluids. The experimental and numerical results demonstrate an initial rapid increase in efficiency with volume fraction, followed by a leveling off in efficiency as volume fraction continues to increase

Vapor Generation in a Nanoparticle Liquid Suspension Using a Focused, Continuous Laser

This letter discusses experimentation with optically induced phase change in nanoparticle liquid suspensions-commonly termed nanofluids. Four different types of nanofluids at five concentrations were exposed to a similar to 120 mW, 532 nm laser beam to determine the minimum laser flux needed to create vapor. Laser irradiance was varied between 0-770 W cm(-2). While the experiments were simple, they involved many complex, interrelated physical phenomena, including: subcooled boiling, thermal driven particle/bubble motion, nanoparticle radiative absorption/scattering, and nanoparticle clumping. Such phenomena could enable novel solar collectors in which the working fluid directly absorbs energy and undergoes phase change in a single step. c 2009 American Institute of Physics. [doi: 10.1063/1.3250174

Applicability of Nanofluids in High Flux Solar Collectors

Concentrated solar energy has become the input for an increasing number of experimental and commercial thermal systems over the past 10-15 years [M. Thirugnanasambandam et al., Renewable Sustainable Energy Rev. 14 (2010)]. Recent papers have indicated that the addition of nanoparticles to conventional working fluids (i.e., nanofluids) can improve heat transfer and solar collection [H. Tyagi et al., J. Sol. Energy Eng. 131, 4 (2009); P. E. Phelan et al., Annu. Rev. Heat Transfer 14 (2005)]. This work indicates that power tower solar collectors could benefit from the potential efficiency improvements that arise from using a nanofluid working fluid. A notional design of this type of nanofluid receiver is presented. Using this design, we show a theoretical nanofluid enhancement in efficiency of up to 10% as compared to surface-based collectors when solar concentration ratios are in the range of 100-1000. Furthermore, our analysis shows that graphite nanofluids with volume fractions on the order of 0.001% or less are suitable for 10-100 MW(e) power plants. Experiments on a laboratory-scale nanofluid dish receiver suggest that up to 10% increase in efficiency is possible (relative to a conventional fluid)-if operating conditions are chosen carefully. Lastly, we use these findings to compare the energy and revenue generated in a conventional solar thermal plant to a nanofluid-based one. It is found that a 100 MW(e) capacity solar thermal power tower operating in a solar resource similar to Tucson, AZ, could generate similar to$ 3.5 million more per year by incorporating a nanofluid receiver. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3571565

New county records of three Baptisia species in Arkansas, with an updated distribution map

New county records of three Baptisia species are reported in Arkansas, together with an updated distribution map

Nanofluid optical property characterization: towards efficient direct absorption solar collectors

Suspensions of nanoparticles (i.e., particles with diameters < 100 nm) in liquids, termed nanofluids, show remarkable thermal and optical property changes from the base liquid at low particle loadings. Recent studies also indicate that selected nanofluids may improve the efficiency of direct absorption solar thermal collectors. To determine the effectiveness of nanofluids in solar applications, their ability to convert light energy to thermal energy must be known. That is, their absorption of the solar spectrum must be established. Accordingly, this study compares model predictions to spectroscopic measurements of extinction coefficients over wavelengths that are important for solar energy (0.25 to 2.5 μm). A simple addition of the base fluid and nanoparticle extinction coefficients is applied as an approximation of the effective nanofluid extinction coefficient. Comparisons with measured extinction coefficients reveal that the approximation works well with water-based nanofluids containing graphite nanoparticles but less well with metallic nanoparticles and/or oil-based fluids. For the materials used in this study, over 95% of incoming sunlight can be absorbed (in a nanofluid thickness ≥10 cm) with extremely low nanoparticle volume fractions - less than 1 × 10-5, or 10 parts per million. Thus, nanofluids could be used to absorb sunlight with a negligible amount of viscosity and/or density (read: pumping power) increase