New generation hole transporting materials for perovskite solar cells: amide-based small-molecules with nonconjugated backbones

State‐of‐the‐art perovskite‐based solar cells employ expensive, organic hole transporting materials (HTMs) such as Spiro‐OMeTAD that, in turn, limits the commercialization of this promising technology. Herein an HTM (EDOT‐Amide‐TPA) is reported in which a functional amide‐based backbone is introduced, which allows this material to be synthesized in a simple condensation reaction with an estimated cost of <$5 g−1. When employed in perovskite solar cells, EDOT‐Amide‐TPA demonstrates stabilized power conversion efficiencies up to 20.0% and reproducibly outperforms Spiro‐OMeTAD in direct comparisons. Time resolved microwave conductivity measurements indicate that the observed improvement originates from a faster hole injection rate from the perovskite to EDOT‐Amide‐TPA. Additionally, the devices exhibit an improved lifetime, which is assigned to the coordination of the amide bond to the Li‐additive, offering a novel strategy to hamper the migration of additives. It is shown that, despite the lack of a conjugated backbone, the amide‐based HTM can outperform state‐of‐the‐art HTMs at a fraction of the cost, thereby providing a novel set of design strategies to develop new, low‐cost HTMs

New generation hole transporting materials for perovskite solar cells: amide-based small-molecules with nonconjugated backbones

State‐of‐the‐art perovskite‐based solar cells employ expensive, organic hole transporting materials (HTMs) such as Spiro‐OMeTAD that, in turn, limits the commercialization of this promising technology. Herein an HTM (EDOT‐Amide‐TPA) is reported in which a functional amide‐based backbone is introduced, which allows this material to be synthesized in a simple condensation reaction with an estimated cost of <$5 g−1. When employed in perovskite solar cells, EDOT‐Amide‐TPA demonstrates stabilized power conversion efficiencies up to 20.0% and reproducibly outperforms Spiro‐OMeTAD in direct comparisons. Time resolved microwave conductivity measurements indicate that the observed improvement originates from a faster hole injection rate from the perovskite to EDOT‐Amide‐TPA. Additionally, the devices exhibit an improved lifetime, which is assigned to the coordination of the amide bond to the Li‐additive, offering a novel strategy to hamper the migration of additives. It is shown that, despite the lack of a conjugated backbone, the amide‐based HTM can outperform state‐of‐the‐art HTMs at a fraction of the cost, thereby providing a novel set of design strategies to develop new, low‐cost HTMs

Quantized Majorana conductance

Majorana zero-modes hold great promise for topological quantum computing. Tunnelling spectroscopy in electrical transport is the primary tool to identify the presence of Majorana zero-modes, for instance as a zero-bias peak (ZBP) in differential-conductance. The Majorana ZBP-height is predicted to be quantized at the universal conductance value of 2e2/h at zero temperature. Interestingly, this quantization is a direct consequence of the famous Majorana symmetry, 'particle equals antiparticle'. The Majorana symmetry protects the quantization against disorder, interactions, and variations in the tunnel coupling. Previous experiments, however, have shown ZBPs much smaller than 2e2/h, with a recent observation of a peak-height close to 2e2/h. Here, we report a quantized conductance plateau at 2e2/h in the zero-bias conductance measured in InSb semiconductor nanowires covered with an Al superconducting shell. Our ZBP-height remains constant despite changing parameters such as the magnetic field and tunnel coupling, i.e. a quantized conductance plateau. We distinguish this quantized Majorana peak from possible non-Majorana origins, by investigating its robustness on electric and magnetic fields as well as its temperature dependence. The observation of a quantized conductance plateau strongly supports the existence of non-Abelian Majorana zero-modes in the system, consequently paving the way for future braiding experiments.Comment: 5 figure

Understanding the impact of tuberous sclerosis complex:development and validation of the TSC-PROM

BACKGROUND: Tuberous sclerosis complex (TSC) is a rare and complex genetic disorder, associated with tumor growth in various organ systems, epilepsy, and a range of neuropsychiatric manifestations including intellectual disability. With improving patient-centered care and targeted therapies, patient-reported outcome measures (PROMs) are needed to measure the impact of TSC manifestations on daily functioning. The aim of this study was to develop a TSC-specific PROM for adults that captures the impact of TSC on physical functions, mental functions, activity and participation, and the social support individuals with TSC receive, called the TSC-PROM. METHODS: COSMIN methodology was used to develop a self-reported and proxy-reported version. Development and validation consisted of the following studies: PROM development, content validity, structural validity, internal consistency, and construct validity. The International Classification of Functioning and Disability was used as a framework. Content validity was examined by a multidisciplinary expert group and cognitive interview study. Structural and construct validity, and internal consistency were examined in a large cohort, using confirmatory factor analysis, hypotheses testing, and Cronbach's alpha. RESULTS: The study resulted in an 82-item self version and 75-item proxy version of the TSC-PROM with four subscales (physical functions 18 and 19 items, mental functions 37 and 28 items, activities and participation 13 and 14 items, social support 13 items, for self version and proxy version respectively). Sufficient results were found for structural validity with sufficient unidimensionality for each subscale. With regard to construct validity, 82% of the hypotheses were met for the self version and 59% for the proxy version. The PROM showed good internal consistency (Cronbach's alpha 0.78-0.97). CONCLUSIONS: We developed a PROM for adults with TSC, named TSC-PROM, showing sufficient evidence for reliability and validity that can be used in clinical and research settings to systematically gain insight into their experiences. It is the first PROM in TSC that addresses the impact of specific TSC manifestations on functioning, providing a valuable, patient-centered addition to the current clinical outcomes.</p

Charge transfer from methylammonium lead iodide perovskite to organic transport materials: Efficiencies, transfer rates, and interfacial recombination

Perovskite‐based photovoltaics have been rapidly developed, with record power conversion efficiencies now exceeding 22%. In order to rationally design efficient and stable perovskite solar cells, it is important to understand not only charge trapping and recombination events, but also processes occurring at the perovskite/transport material (TM) interface, such as charge transfer and interfacial recombination. In this work, time‐resolved microwave conductivity measurements are performed to investigate these interfacial processes for methylammonium lead iodide and various state‐of‐the‐art organic TMs. A global kinetic model is developed, which accurately describes both the dynamics of excess charges in the perovskite layer and transfer to charge‐specific TMs. The authors conclude that for state‐of‐the‐art materials, such as Spiro‐OMeTAD and PCBM, the charge extraction efficiency is not significantly affected by intra‐band gap traps for trap densities under 1015 cm–3. Finally, the transfer rates to C60, PCBM, EDOT‐OMeTPA, and Spiro‐OMeTAD are sufficient to outcompete second order recombination under excitation densities representative for illumination by AM1.5

Recycling Perovskite Solar Cells To Avoid Lead Waste

Methylammonium lead iodide (MAPbI₃) perovskite based solar cells have recently emerged as a serious competitor for large scale and low-cost photovoltaic technologies. However, since these solar cells contain toxic lead, a sustainable procedure for handling the cells after their operational lifetime is required to prevent exposure of the environment to lead and to comply with international electronic waste disposal regulations. Herein, we report a procedure to remove every layer of the solar cells separately, which gives the possibility to selectively isolate the different materials. Besides isolating the toxic lead iodide in high yield, we show that the PbI₂ can be reused for the preparation of new solar cells with comparable performance and in this way avoid lead waste. Furthermore, we show that the most expensive part of the solar cell, the conductive glass (FTO), can be reused several times without any reduction in the performance of the devices. With our simple recycling procedure, we address both the risk of contamination and the waste disposal of perovskite based solar cells while further reducing the cost of the system. This brings perovskite solar cells one step closer to their introduction into commercial systems