BeppoSAX observations of Mrk 841 and Mrk335

We present and discuss BeppoSAX observations of Mrk841 and Mrk335, two Seyfert 1 galaxies in which previous observations have established the presence of soft excesses. We confirm the soft excess in both sources, even if for Mrk~841 a warm absorber provides a fit almost as good as the one with a true excess. As far as the hard X-ray continuum is concerned, a Comptonization model provides a fit as good as a power law and a physically sound solution for Mrk841. For Mrk335, the Comptonization model gives a result which is somewhat better on statistical ground, but rather problematic on physical ground. The most interesting results regard the reprocessing components. For Mrk841 we find a very large reflection continuum but an almost normal iron line equivalent width even if, within the errors, a solution in which both components are a factor ~2 larger than expected for an accretion disc is still marginally acceptable. If this is the case, an anisotropy of the primary emission seems the best explanation. On the contrary, in Mrk335 we find a very large iron line EW but a reflection component not accordingly large. In this case, the best solution seems to be in terms of reflection from an ionized disc.Comment: Accepted for publication in A&

Nano-indentation properties of tungsten carbide-cobalt composites as a function of tungsten carbide crystal orientation

Tungsten carbide-cobalt (WC-Co) composites are a class of advanced materials that have unique properties, such as wear resistance, hardness, strength, fracture-toughness and both high temperature and chemical stability. It is well known that the local indentation properties (i.e., nano- and micro-hardness) of the single crystal WC particles dispersed in such composite materials are highly anisotropic. In this paper, the nanoindentation response of the WC grains of a compact, full-density, sintered WC-10Co composite material has been investigated as a function of the crystal orientation. Our nanoindentation survey has shown that the nanohardness was distributed according to a bimodal function. This function was post-processed using the unique features of the finite mixture modelling theory. The combination of electron backscattered difiraction (EBSD) and statistical analysis has made it possible to identify the orientation of the WC crystal and the distinct association of the inherent nanoindentation properties, even for a small set (67) of nanoindentations. The proposed approach has proved to be faster than the already existing ones and just as reliable, and it has confirmed the previous findings concerning the relationship between crystal orientation and indentation properties, but with a significant reduction of the experimental data

Correlation between the indentation properties and microstructure of dissimilar capacitor discharge welded WC-Co/high-speed steel joints

The welding of cemented carbide to tool steel is a challenging task, of scientific and industrial relevance, as it combines the high level of hardness of cemented carbide with the high level of fracture toughness of steel, while reducing the shaping cost and extending the application versatility, as its tribological, toughness, thermal and chemical properties can be optimally harmonised. The already existing joining technologies often impart either insufficient toughness or poor high-temperature strength to a joint to withstand the ever-increasing severe service condition demands. In this paper, a novel capacitor discharge welding (CDW) process is investigated for the case of a butt-joint between a tungsten carbide-cobalt (WC-Co) composite rod and an AISI M35 high-speed steel (HSS) rod. The latter was shaped with a conical-ended projection to promote a high current concentration and heat at the welding zone. CDW functions by combining a direct current (DC) electric current pulse and external uniaxial pressure after a preloading step, in which only uniaxial pressure is applied. The relatively high heating and cooling rates promote a thin layer of a characteristic ultrafine microstructure that combines high strength and toughness. Morphological analysis showed that the CDW process: (a) forms a sound and net shaped joint, (b) preserves the sub-micrometric grain structure of the original WC-Co composite base materials, via a transitional layer, (c) refines the microstructure of the original martensite of the HSS base material, and (d) results in an improved corrosion resistance across a 1-mm thick layer near the weld interface on the steel side. A nano-indentation test survey determined: (e) no hardness deterioration on the HSS side of the weld zone, although (f) a slight decrease in hardness was observed across the transitional layer on the composite side. Furthermore, (g) an indication of toughness of the joint was perceived as the size of the crack induced by processing the residual stress after sample preparation was unaltered

Antimicrobial Peptides and Physical Activity: A Great Hope against COVID 19

Antimicrobial peptides (AMPs), α- and β-defensins, possess antiviral properties. These AMPs achieve viral inhibition through different mechanisms of action. For example, they can: (i) bind directly to virions; (ii) bind to and modulate host cell-surface receptors, disrupting intracellular signaling; (iii) function as chemokines to augment and alter adaptive immune responses. Given their antiviral properties and the fact that the development of an effective coronavirus disease 2019 (COVID-19) treatment is an urgent public health priority, they and their derivatives are being explored as potential therapies against COVID-19. These explorations using various strategies, range from their direct interaction with the virus to using them as vaccine adjuvants. However, AMPs do not work in isolation, specifically in their role as potent immune modulators, where they interact with toll-like receptors (TLRs) and chemokine receptors. Both of these receptors have been shown to play roles in COVID-19 pathogenesis. In addition, it is known that a healthy lifestyle accompanied by controlled physical activity can represent a natural weapon against COVID-19. In competitive athletes, an increase in serum defensins has been shown to function as self-protection from the attack of microorganisms, consequently a controlled physical activity could act as a support to any therapies in fighting COVID-19. Therefore, including information on all these players' interactions would produce a complete picture of AMP-based therapies' response

Effect of a high forage: Concentrate ratio on milk yield, blood parameters and oxidative status in lactating cows

A feeding strategy that requires a forage: concentrate ratio equal to 70: 30, with at least five different herbs in the forage and the use of silages prohibited, has recently been introduced in Italy. Despite the benefits in terms of human health (lower ω6: ω3 ratio, higher conjugated linoleic acid level) of the obtained milk, little information regarding the possible effects on cows' health is available. The aim of this study was to evaluate the effects of such a feeding strategy in dairy cows (90 days in milk at the beginning of the trial) on milk yield and composition, and blood metabolic profile, including the evaluation of oxidative stress. The proposed feeding strategy, compared with a semi-intensive strategy, resulted in an improvement of animal oxidative status (lower levels of reactive oxygen metabolites, higher levels of antioxidant potential and anti-reactive oxygen metabolites) and a significant increase of milk urea only in the first part of the trial. No differences in milk yield and composition were detected throughout the trial

Determination of the yield radius and yield stress in 2198-T3 aluminum alloy by means of the dual-scale instrumented indentation test

A new dual-scale instrumented indentation test (DualS-IIT) methodology is here proposed to determine the yield stress (in a tensile-like sense). The methodology involves measuring the bulk yield radius, as defined by the expansion cavity model (ECM), induced by a Vickers macro-indentation in a medium plane cross-section. The bulk yield radius is measured by means of a subsurface nano-hardness survey along the load direction in correspondence to the transition interface between the hemispherical strain hardened region and the surrounding elastic region. The methodology has been applied to an Al–Li (A2198-T3) alloy and a yield stress of 297 MPa has been measured (in agreement with a tensile test); moreover, anomalous plastic deformation behaviour has appeared under indentation. The combination of macro- and nano-indentation tests in one single experiment, as in the proposed methodology, offers a unique experimental basis to directly correlate the mechanical properties of a material at two different scales, which at present is an open issue in the research on indentation

Correlation between the bath composition and nanoporosity of DC-electrodeposited Ni-Fe alloy

The outstanding mechanical strength of as-deposited DC-electrodeposited nanocrystalline (nc) Ni-Fe alloys has been the subject of numerous researches in view of their scientific and practical interest. However, recent studies have reported a dramatic drop in ductility upon annealing above 350°C, associated with a concomitant abnormal rapid grain growth. The inherent cause has been ascribed to the presence of a detrimental product or by product in the bath, which affects either the microstructure or causes defects in the concentration and/or distribution of the as-deposited films. The present work has been inspired by the observed abnormal behaviour of annealed electrodeposited nc Ni-Fe alloy, which has here been addressed by considering the relationship between the composition of the bath (iron-chloride, nickel-sulphate solution, saccharin and ascorbic acid) and deposition defects (e.g. grain boundary pores) in the case of an nc Ni-Fe (Fe 48 wt%) alloy. The current investigations have included X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) in both as-deposited and post-annealed conditions (300°C–400°C). XPS depth profiling with Ar ion sputtering showed a significant amount of C and O impurities entrapped in the foils during deposition. As such impurities are often overlooked in common analytical techniques, new scenarios may need to be rationalised to explain the observed drop in tensile ductility of the as-deposited Ni-Fe alloys

Secondary immune-mediated thrombocytopenia in dogs naturally infected by Leishmania infantum.

Forty-four dogs naturally infected by Leishmania infantum were divided into two groups: 20 thrombocytopenic dogs with fewer than 150 x 10(9) platelets/l, and 24 non-thrombocytopenic dogs with more than 200 x 10(9) platelets/l. Ten clinically healthy dogs were used as controls. A haematological profile was obtained and the dogs' serum was used to assess the presence of platelet-binding IgM and IgG antibodies using a flow cytometry technique. Nineteen of the 20 thrombocytopenic dogs, and 13 of the 24 non-thrombocytopenic dogs had detectable levels of platelet-binding immunoglobulins, but none of the control dogs did so. The differences were significantly different for both IgM and IgG platelet-binding antibodies