15 research outputs found
Recommended from our members
Quantitative Chemical Imaging with Multiplex Stimulated Raman Scattering Microscopy
Stimulated Raman scattering (SRS) microscopy is a newly developed label-free chemical imaging technique that overcomes the speed limitation of confocal Raman microscopy while avoiding the nonresonant background problem of coherent anti-Stokes Raman scattering (CARS) microscopy. Previous demonstrations have been limited to single Raman band measurements. We present a novel modulation multiplexing approach that allows real-time detection of multiple species using the fast Fourier transform. We demonstrate the quantitative determination of chemical concentrations in a ternary mixture. Furthermore, two imaging applications are pursued: (1) quantitative determination of oil content as well as pigment and protein concentration in microalgae cultures; and (2) 3D high-resolution imaging of blood, lipids, and protein distribution in ex vivo mouse skin tissue. We believe that quantitative multiplex SRS uniquely combines the advantage of fast label-free imaging with the fingerprinting capability of Raman spectroscopy and enables numerous applications in lipid biology as well as biomedical imaging.Chemistry and Chemical BiologyEngineering and Applied Science
Quantitative Chemical Imaging with Multiplex Stimulated Raman Scattering Microscopy
Stimulated Raman scattering (SRS) microscopy is a newly
developed
label-free chemical imaging technique that overcomes the speed limitation
of confocal Raman microscopy while avoiding the nonresonant background
problem of coherent anti-Stokes Raman scattering (CARS) microscopy.
Previous demonstrations have been limited to single Raman band measurements.
We present a novel modulation multiplexing approach that allows real-time
detection of multiple species using the fast Fourier transform. We
demonstrate the quantitative determination of chemical concentrations
in a ternary mixture. Furthermore, two imaging applications are pursued:
(1) quantitative determination of oil content as well as pigment and
protein concentration in microalgae cultures; and (2) 3D high-resolution
imaging of blood, lipids, and protein distribution in ex vivo mouse
skin tissue. We believe that quantitative multiplex SRS uniquely combines
the advantage of fast label-free imaging with the fingerprinting capability
of Raman spectroscopy and enables numerous applications in lipid biology
as well as biomedical imaging
Multiexciton Solar Cells of CuInSe<sub>2</sub> Nanocrystals
Peak external quantum efficiencies (EQEs) of just over 120% were observed in photovoltaic (PV) devices
of CuInSe<sub>2</sub> nanocrystals prepared with a photonic curing
process. The extraction of more than one electron/hole pair as a result
of the absorption of a single photon can occur if multiple excitons
are generated and extracted. Multiexciton generation (MEG) in the
nanocrystal films was substantiated by transient absorption spectroscopy.
We propose that photonic curing leads to sufficient electronic coupling
between nanocrystals to enable multiexciton extraction under typical
solar illumination conditions. Under low light conditions, however,
the EQE drops significantly, indicating that photonic curing-induced
ligand desorption creates a significant amount of traps in the film
that limit the overall power conversion efficiency of the device
Multiexciton Solar Cells of CuInSe<sub>2</sub> Nanocrystals
Peak external quantum efficiencies (EQEs) of just over 120% were observed in photovoltaic (PV) devices
of CuInSe<sub>2</sub> nanocrystals prepared with a photonic curing
process. The extraction of more than one electron/hole pair as a result
of the absorption of a single photon can occur if multiple excitons
are generated and extracted. Multiexciton generation (MEG) in the
nanocrystal films was substantiated by transient absorption spectroscopy.
We propose that photonic curing leads to sufficient electronic coupling
between nanocrystals to enable multiexciton extraction under typical
solar illumination conditions. Under low light conditions, however,
the EQE drops significantly, indicating that photonic curing-induced
ligand desorption creates a significant amount of traps in the film
that limit the overall power conversion efficiency of the device
Plastic Microgroove Solar Cells Using CuInSe<sub>2</sub> Nanocrystals
Plastic photovoltaic devices (PVs)
were fabricated by spray-depositing
copper indium diselenide (CuInSe<sub>2</sub>) nanocrystals into micrometer-scale
groove features patterned into polyethylene terephthalate (PET) substrates.
Each groove has sidewall coatings of Al/CdS and Au and performs as
an individual solar cell. These PV groove features can be linked electrically
in series to achieve high voltages. For example, cascades of up to
15 grooves have been made with open-circuit voltages of up to 5.8
V. On the basis of the groove geometry, the power conversion efficiencies
(PCEs) of the devices reached as high as 2.2%. Using the active area
and photovoltaic response of devices determined from light-beam-induced
current (LBIC) and photoreflectivity measurements gave PCE values
as high as 4.4%
Copper Indium Gallium Selenide (CIGS) Photovoltaic Devices Made Using Multistep Selenization of Nanocrystal Films
The power conversion efficiency of
photovoltaic devices made with
ink-deposited Cu(In<sub><i>x</i></sub>Ga<sub>1–<i>x</i></sub>)Se<sub>2</sub> (CIGS) nanocrystal layers can be
enhanced by sintering the nanocrystals with a high temperature selenization
process. This process, however, can be challenging to control. Here,
we report that ink deposition followed by annealing under inert gas
and then selenization can provide better control over CIGS nanocrystal
sintering and yield generally improved device efficiency. Annealing
under argon at 525 °C removes organic ligands and diffuses sodium
from the underlying soda lime glass into the Mo back contact to improve
the rate and quality of nanocrystal sintering during selenization
at 500 °C. Shorter selenization time alleviates excessive MoSe<sub>2</sub> formation at the Mo back contact that leads to film delamination,
which in turn enables multiple cycles of nanocrystal deposition and
selenization to create thicker, more uniform absorber films. Devices
with power conversion efficiency greater than 7% are fabricated using
the multiple step nanocrystal deposition and sintering process