Multi-watt 589nm fiber laser source

We have demonstrated 3.5W of 589nm light from a fiber laser using periodically poled stoichiometric Lithium Tantalate (PPSLT) as the frequency conversion crystal. The system employs 938nm and 1583nm fiber lasers, which were sum-frequency mixed in PPSLT to generate 589nm light. The 938nm fiber laser consists of a single frequency diode laser master oscillator (200mW), which was amplified in two stages to >15W using cladding pumped Nd{sup 3+} fiber amplifiers. The fiber amplifiers operate at 938nm and minimize amplified spontaneous emission at 1088nm by employing a specialty fiber design, which maximizes the core size relative to the cladding diameter. This design allows the 3-level laser system to operate at high inversion, thus making it competitive with the competing 1088nm 4-level laser transition. At 15W, the 938nm laser has an M{sup 2} of 1.1 and good polarization (correctable with a quarter and half wave plate to >15:1). The 1583nm fiber laser consists of a Koheras 1583nm fiber DFB laser that is pre-amplified to 100mW, phase modulated and then amplified to 14W in a commercial IPG fiber amplifier. As a part of our research efforts we are also investigating pulsed laser formats and power scaling of the 589nm system. We will discuss the fiber laser design and operation as well as our results in power scaling at 589nm

Engineering the Petawatt Laser into Nova

The engineering process of integrating the Petawatt (10{sup 15} watts) laser system into the existing 30 kJ (UV) Nova laser at Lawrence Livermore National Laboratory (LLNL) is described in detail. The nanosecond-long, chirped Petawatt laser pulse is initially generated in a separate master oscillator room and then injected into one of Nova`s 10 beamlines. There, the pulse is further amplified and enlarged to {approximately}{phi}60 cm, temporally compressed under vacuum to <500 fs using large diameter diffraction gratings, and then finally focused onto targets using a parabolic mirror. The major Petawatt components are physically large which created many significant engineering challenges in design, installation and implementation. These include the diffraction gratings and mirrors, vacuum compressor chamber, target chamber, and parabolic focusing mirror. Other Petawatt system components were also technically challenging and include: an injection beamline, transport spatial filters, laser diagnostics, alignment components, motor controls, interlocks, timing and synchronization systems, support structures, and vacuum systems. The entire Petawatt laser system was designed, fabricated, installed, and activated while the Nova laser continued its normal two-shift operation. This process required careful engineering and detailed planning to prevent experimental downtime and to complete the project on schedule

Measuring the economic impact of the wellspring healthy living centre's social prescribing wellbeing programme for low level mental health issues encountered by GP services

This research evaluates the impacts of a holistic social prescribing Wellbeing Programme delivered by the Wellspring Healthy Living Centre, Bristol. As a holistic social prescribing approach it is representative of many third sector led interventions seeking to support local primary care services. It offers GP-referred patients 12 weeks of one-to-one support followed by 12 months of group support around a particular activity. Socio-economic impact was measured through Social Return On Investment (SROI) approach using a pre and post intervention interviews using the Wellspring Wellbeing Questionnaire tool (WWQ). Data collected using the WWQ suggests that three months after a beneficiary’s induction on the intervention beneficiaries show statistically significant improvement in: PHQ9 (p

Engineering the petawatt laser into Nova

The engineering process of integrating the Petawatt (10{sup 15} watts) laser system into the existing 30 kJ (UV) Nova laser at Lawrence Livermore National Laboratory (LLNL) is described in detail. The nanosecond-long, chirped Petawatt laser pulse is initially generated in a separate master oscillator room and then injected into one of Nova`s 10 beamlines. There, the pulse is further amplified and enlarged to {approximately}{phi}60 cm, temporally compressed under vacuum to <500 fs using large diameter diffraction gratings, and then finally focused onto targets using a parabolic mirror. The major Petawatt components are physically large which created many significant engineering challenges in design, installation and implementation. These include the diffraction gratings and mirrors, vacuum compressor chamber, target chamber, and parabolic focusing mirror. Other Petawatt system components were also technically challenging and include: an injection beamline, transport spatial filters, laser diagnostics, alignment components, motor controls, interlocks, timing and synchronization systems, support structures, and vacuum systems. The entire Petawatt laser system was designed, fabricated, installed, and activated while the Nova laser continued its normal two-shift operation. This process required careful engineering and detailed planning to prevent experimental downtime and to complete the project on schedule

Electron, photon, and ion beams from the relativistic interaction of Petawatt laser pulses with solid targets

In our Petawatt laser experiments several hundred joules of 1 {micro}m laser light in 0.5-5.0 ps pulses with intensities up to 3 x 10{sup 20}Wcm{sup -2} were incident on solid targets producing a strongly relativistic interaction. The energy content, spectra, and angular patterns of the photon, electron, and ion radiations were diagnosed in a number of ways, including several novel (to laser physics) nuclear activation techniques. From the beamed bremsstrahlung we infer that about 40-50% of the laser energy is converted to broadly beamed hot electrons. Their direction centroid varies from shot to shot, but the beam has a consistent width. Extraordinarily luminous ion beams almost precisely normal to the rear of various targets are seen--up to 3 x 10{sup 13} protons with kT{sub ion} {approx} several MeV representing {approx}6% of the laser energy. We observe ion energies up to at least 55 MeV. The ions appear to originate from the rear target surfaces. The edge of the ion beam is very sharp, and collimation increases with ion energy. At the highest energies, a narrow feature appears in the ion spectra, and the apparent size of the emitting spot is smaller than the full back surface area. Any ion emission from the front of the targets is much less than from the rear and is not sharply beamed. The hot electrons generate a Debye sheath with electrostatic fields of order MV per micron which apparently accelerate the ions