120 research outputs found

    Inclusion of an Introduction to Infrastructure Course in a Civil and Environmental Engineering Curriculum

    Get PDF
    Civil infrastructure refers to the built environment (sometimes referred to as public works) and consists of roads, bridges, buildings, dams, levees, drinking water treatment facilities, wastewater treatment facilities, power generation and transmission facilities, communications, solid waste facilities, hazardous waste facilities, and other sectors. Although there is a need to train engineers who have a holistic view of infrastructure, there is evidence that civil and environmental engineering (CEE) programs have not fully addressed this increasingly recognized need. One effective approach to address this educational gap is to incorporate a course related to infrastructure into the curriculum for first-year or second-year civil and environmental engineering students. Therefore, this study assesses the current status of teaching such courses in the United States and identifies the incentives for, and the barriers against, incorporating an introduction to infrastructure course into schools’ current CEE curricula. Two distinct activities enabled these objectives. First, a questionnaire was distributed to CEE programs across the United States, to which 33 responses were received. The results indicated that although the majority of participants believe that offering such a course will benefit students by increasing the breadth of the curriculum and by providing a holistic view of CEE, barriers such as the maximum allowable credits for graduation, the lack of motivation within a department—either because such a course did not have a champion or because the department had no plans to revise their curriculum—and a lack of expertise among faculty members inhibited inclusion of the course in curricula. Second, three case studies demonstrating successful inclusion of an introduction to infrastructure course into the CEE curriculum were evaluated. Cases were collected from Marquette University, University of Wisconsin-Platteville, and West Point CEE programs, and it was found that the key to success in including such a course is a motivated team of faculty members who are committed to educating students about different aspects of infrastructure. The results of the study can be used as a road map to help universities successfully incorporate an introduction to infrastructure course in their CEE programs

    Frequency and surface dependence of the mechanical loss in fused silica

    Full text link
    We have compiled measurements of the mechanical loss in fused silica from samples spanning a wide range of geometries and resonant frequency in order to model the known variation of the loss with frequency and surface-to-volume ratio. This improved understanding of the mechanical loss has contributed significantly to the design of advanced interferometric gravitational wave detectors, which require ultra-low loss materials for their test mass mirrors.Comment: 5 pages, 3 figure but 5 figure file

    Effect of Optical Coating and Surface Treatments on Mechanical Loss in Fused Silica

    Full text link
    We report on the mechanical loss in fused silica samples with various surface treatments and compare them with samples having an optical coating. Mild surface treatments such as washing in detergent or acetone were not found to affect the mechanical loss of flame-drawn fused silica fibers stored in air. However, mechanical contact (with steel calipers) significantly increased the loss. The application of a high-reflective optical coating of the type used for the LIGO test masses was found to greatly increase the mechanical loss of commercially polished fused silica microscope slides. We discuss the implications for the noise budget of interferometers.Comment: 7 pages, 2 figures. Accepted for publication in the Proceedings of the Third Eduardo Amaldi Conference on Gravitational Waves, July 12-16, 1999. Updated version contains a correction of Eq. 3 and an estimate for the loss angle of a LIGO coating. (Neither of these revisions are included in the version published in the conference proceedings.

    Pendulum Mode Thermal Noise in Advanced Interferometers: A comparison of Fused Silica Fibers and Ribbons in the Presence of Surface Loss

    Get PDF
    The use of fused-silica ribbons as suspensions in gravitational wave interferometers can result in significant improvements in pendulum mode thermal noise. Surface loss sets a lower bound to the level of noise achievable, at what level depends on the dissipation depth and other physical parameters. For LIGO II, the high breaking strength of pristine fused silica filaments, the correct choice of ribbon aspect ratio (to minimize thermoelastic damping), and low dissipation depth combined with the other achievable parameters can reduce the pendulum mode thermal noise in a ribbon suspension well below the radiation pressure noise. Despite producing higher levels of pendulum mode thermal noise, cylindrical fiber suspensions provide an acceptable alternative for LIGO II, should unforeseen problems with ribbon suspensions arise.Comment: Submitted to Physics Letters A (Dec. 14, 1999). Resubmitted to Physics Letters A (Apr. 3, 2000) after internal (LSC) review process. PACS - 04.80.Nn, 95.55.Ym, 05.40.C

    Very high quality factor measured in annealed fused silica

    Full text link
    We present the results of quality factor measurements for rod samples made of fused silica. To decrease the dissipation we annealed our samples. The highest quality factor that we observed was Q=(2.03±0.01)×108Q=(2.03\pm0.01)\times10^8 for a mode at 384 Hz. This is the highest published value of QQ in fused silica measured to date.Comment: 8 pages, 2 figure

    Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings

    Full text link
    We report on thermal noise from the internal friction of dielectric coatings made from alternating layers of Ta2O5 and SiO2 deposited on fused silica substrates. We present calculations of the thermal noise in gravitational wave interferometers due to optical coatings, when the material properties of the coating are different from those of the substrate and the mechanical loss angle in the coating is anisotropic. The loss angle in the coatings for strains parallel to the substrate surface was determined from ringdown experiments. We measured the mechanical quality factor of three fused silica samples with coatings deposited on them. The loss angle of the coating material for strains parallel to the coated surface was found to be (4.2 +- 0.3)*10^(-4) for coatings deposited on commercially polished slides and (1.0 +- 0.3)*10^{-4} for a coating deposited on a superpolished disk. Using these numbers, we estimate the effect of coatings on thermal noise in the initial LIGO and advanced LIGO interferometers. We also find that the corresponding prediction for thermal noise in the 40 m LIGO prototype at Caltech is consistent with the noise data. These results are complemented by results for a different type of coating, presented in a companion paper.Comment: Submitted to LSC (internal) review Sept. 20, 2001. To be submitted to Phys. Lett.

    Titania-doped tantala/silica coatings for gravitational-wave detection

    Get PDF
    Reducing thermal noise from optical coatings is crucial to reaching the required sensitivity in next generation interferometric gravitational-wave detectors. Here we show that adding TiO2 to Ta2O5 in Ta2O5/SiO2 coatings reduces the internal friction and in addition present data confirming it reduces thermal noise. We also show that TiO2-doped Ta2O5/SiO2 coatings are close to satisfying the optical absorption requirements of second generation gravitational-wave detectors
    • …
    corecore