238 research outputs found
A modified layer-removal method for residual stress measurement in electrodeposited nickel films
Combining the traditional layer-removal method with a cantilever beam model, a modified layer-removal method is developed and used to measure residual stress in single and multi-layer electrodeposited nickel films with thickness of 2.5 μm. The out-of-plane displacement of the free tip of a cantilever beam is measured by the digital speckle correlation method. The results show that residual stress in a single semimat nickel film is compressive, while in a multi-layer system composed of dark, semimat and holophote nickel, residual stress in the surface layer is tensile. Residual stress decreases gradually with the increase of etching depths of single and multi-layer films. These findings are in qualitative agreement with nanoindentation tests, which confirms the reliability of the modified layer-removal method
Multiple sources of infection and potential endemic characteristics of the large outbreak of dengue in Guangdong in 2014
A large outbreak of dengue, with the most documented cases, occurred in Guangdong China in 2014. Epidemiological studies and phylogenetic analysis of the isolated dengue virus (DENV) showed this outbreak was attributed to multiple sources and caused by at least two genotypes of DENV-1 (Genotypes I and III) and two genotypes of DENV-2 (Cosmopolitan and Asian I Genotypes). A retrospective review and phylogenetic analysis of DENV isolated in Guangdong showed that DENV-1 Genotype I strains were reported continuously during 2004-2014, Genotype III strains were reported during 2009-2014 ; DENV-2 Cosmopolitan and Asian I Genotype strains were reported continuously during 2012-2014. At least 45,171 cases were reported in this outbreak, with 65.9% of the patients in the 21-55-year-old group. A trend toward a decrease in the daily newly emerged cases lagged by approximately 20 days compared with the mosquito density curve. Several epidemiological characteristics of this outbreak and the stably sustained serotypes and genotypes of DENV isolated in Guangdong suggest that Guangdong has been facing a threat of transforming from a dengue epidemic area to an endemic area. The high temperature, drenching rain, rapid urbanization, and pandemic of dengue in Southeast Asia may have contributed to this large outbreak of dengue
Topological characteristics and mechanical properties of uniaxially thermoformed auxetic foam
We present here a simplified procedure to manufacture auxetic PU foam via a single direction thermoforming compression process applied to conventional (pristine) open cell foam samples. The auxetic foams produced here have a Poisson's ratio ν21 ranging from −1 to 0 in the 1–2 plane and a tangent modulus Et2 ranging from 0.2 MPa to 2 MPa. X-ray μ-CT and 3D skeletonization enabled the extraction of the topological parameters of the pristine and the auxetic foams. The auxetic foam is transverse isotropic with cell structures exhibiting a re-entrant shape along the thermoforming compression direction 1. More ribs are also oriented within the transverse plane 2–3, in which the stiffness is larger. Tensile and compression quasi-static tests have been carried out on samples cut along different directions and having various thermoforming compression ratios rc. Auxeticity is present in the in 1–2 plane only for compression ratios between 40% and 80%. Finite Element models for the pristine and auxetic foams have also been built from the μ-CT scanned 3D models. The numerical results show a good agreement with the experimental data and help explaining the deformation mechanisms of these auxetic foams
Solidification of Al-Sn-Cu based immiscible alloys under intense shearing
The official published version of the Article can be accessed from the link below - Copyright @ 2009 The Minerals, Metals & Materials Society and ASM InternationalThe growing importance of Al-Sn based alloys as materials for engineering applications
necessitates the development of uniform microstructures with improved performance. Guided by the recently thermodynamically assessed Al-Sn-Cu system, two model immiscible alloys, Al-45Sn-10Cu and Al-20Sn-10Cu, were selected to investigate the effects of intensive melt shearing provided by the novel melt conditioning by advanced shear technology (MCAST) unit on the uniform dispersion of the soft Sn phase in a hard Al matrix. Our experimental results have confirmed that intensive melt shearing is an effective way to achieve fine and uniform
dispersion of the soft phase without macro-demixing, and that such dispersed microstructure can be further refined in alloys with precipitation of the primary Al phase prior to the demixing reaction. In addition, it was found that melt shearing at 200 rpm and 60 seconds will be adequate to produce fine and uniform dispersion of the Sn phase, and that higher shearing speed and prolonged shearing time can only achieve minor further refinement.This work is funded by the EPSRC and
DT
Neutrophil-to-lymphocyte ratio as an independent risk factor for mortality in hospitalized patients with COVID-19
Background:
Several studies have described the clinical characteristics of patients with novel coronavirus (SARS-CoV-2) infected pneumonia (COVID-19), indicating severe patients tended to have higher neutrophil to lymphocyte ratio (NLR). Whether baseline NLR could be an independent predictor of in-hospital death in Chinese COVID-19 patients remains to be investigated.
Methods:
A cohort of patients with COVID-19 admitted to the Zhongnan Hospital of Wuhan University from January 1 to February 29 was retrospectively analyzed. The baseline data of laboratory examinations, including NLR, were collected. Univariate and multivariate logistic regression models were developed to assess the independent relationship between the baseline NLR and in-hospital all-cause death. A sensitivity analysis was performed by converting NLR from a continuous variable to a categorical variable according to tertile. Interaction and stratified analyses were conducted as well.
Results:
245 COVID-19 patients were included in the final analyses, and the in-hospital mortality was 13.47%. Multivariate analysis demonstrated that there was 8% higher risk of in-hospital mortality for each unit increase in NLR (Odds ratio [OR] = 1.08; 95% confidence interval [95% CI], 1.01 to 1.14; P = 0.0147). Compared with patients in the lowest tertile, the NLR of patients in the highest tertile had a 15.04-fold higher risk of death (OR = 16.04; 95% CI, 1.14 to 224.95; P = 0.0395) after adjustment for potential confounders. Notably, the fully adjusted OR for mortality was 1.10 in males for each unit increase of NLR (OR = 1.10; 95% CI, 1.02 to 1.19; P = 0.016).
Conclusions:
NLR is an independent risk factor of the in-hospital mortality for COVID-19 patients especially for male. Assessment of NLR may help identify high risk individuals with COVID-19
Search for the Rare Decays J/Psi --> Ds- e+ nu_e, J/Psi --> D- e+ nu_e, and J/Psi --> D0bar e+ e-
We report on a search for the decays J/Psi --> Ds- e+ nu_e + c.c., J/Psi -->
D- e+ nu_e + c.c., and J/Psi --> D0bar e+ e- + c.c. in a sample of 5.8 * 10^7
J/Psi events collected with the BESII detector at the BEPC. No excess of signal
above background is observed, and 90% confidence level upper limits on the
branching fractions are set: B(J/Psi --> Ds- e+ nu_e + c.c.)<4.8*10^-5, B(J/Psi
--> D- e+ nu_e + c.c.) D0bar e+ e- + c.c.)<1.1*10^-5Comment: 10 pages, 4 figure
Study of J/psi decays to Lambda Lambdabar and Sigma0 Sigma0bar
The branching ratios and Angular distributions for J/psi decays to Lambda
Lambdabar and Sigma0 Sigma0bar are measured using BESII 58 million J/psi.Comment: 11 pages, 5 figure
Direct Measurements of the Branching Fractions for and and Determinations of the Form Factors and
The absolute branching fractions for the decays and
are determined using singly
tagged sample from the data collected around 3.773 GeV with the
BES-II detector at the BEPC. In the system recoiling against the singly tagged
meson, events for and events for decays are observed. Those yield
the absolute branching fractions to be and . The
vector form factors are determined to be
and . The ratio of the two form
factors is measured to be .Comment: 6 pages, 5 figure
- …