Cellulose-Multiwall Carbon Nanotube Fiber Actuator Behavior in Aqueous and Organic Electrolyte

As both consumers and producers are shifting from fossil-derived materials to other, more sustainable approaches, there is a growing interest in bio-origin and biodegradable polymers. In search of bio-degradable electro-mechanically active materials, cellulose-multi wall carbon nanotube (Cell-CNT) composites are a focus for the development of actuators and sensors. In the current study, our aim was to fabricate Cell-CNT composite fibers and study their electro-mechanical response as linear actuators in aqueous and propylene carbonate-based electrolyte solutions. While the response was (expectedly) strongly solvent dependent, the different solvents also revealed unexpected phenomena. Cell-CNT fibers in propylene carbonate revealed a strong back-relaxation process at low frequencies, and also a frequency dependent response direction change (change of actuation direction). Cell-CNT fibers operated in aqueous electrolyte showed response typical to electrochemical capacitors including expansion at discharging with controllable actuation dependence on charge density. While the response was similarly stable in both electrolyte solution systems, the aqueous electrolytes were clearly favorable for Cell-CNT with 3.4 times higher conductivities, 4.3 times higher charge densities and 11 times higher strain

Bipolar Resistive Switching in Hafnium Oxide-Based Nanostructures with and without Nickel Nanoparticles

As research into additives and intentionally introduced impurities in dielectric thin film for enhancing the resistive switching based random access memories (RRAM) continues to gain momentum, the aim of the study was to evaluate the effects of chemically presynthesised Ni nanoparticles (NPs) embedded in a dielectric layer to the overall structure and resistive switching properties. HfO2-based thin films embedded with Ni NPs were produced by atomic layer deposition (ALD) from tetrakis(ethylmethylamino)hafnium (TEMAH) and the O2 plasma ALD process onto a TiN/Si substrate. The Ni NPs were separately synthesised through a continuous flow chemistry process and dispersed on the dielectric layer between the two stages of preparing the HfO2 layer. The nanodevices’ morphology and composition were analysed with physical characterisation methods and were found to be uniformly dispersed across the sample, within an amorphous HfO2 layer deposited around them. When comparing the resistive switching properties of otherwise identical samples with and without Ni NPs, the ILRS/IHRS ratio rose from around a 4 to 9 at 0.2 V reading voltage, the switching voltage dropped from ~2 V to ~1.5 V, and a distinct increase in the endurance characteristics could be seen with the addition of the nanoparticles

Printed PEDOT: PSS trilayer: Mechanism evaluation and application in energy storage

Combining ink-jet printing and one of the most stable electroactive materials, PEDOT:PSS (poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)), is envisaged to pave the way for the mass production of soft electroactive materials. Despite its being a well-known electroactive material, widespread application of PEDOT:PSS also requires good understanding of its response. However, agreement on the interpretation of the material’s activities, notably regarding actuation, is not unanimous. Our goal in this work is to study the behavior of trilayers with PEDOT:PSS electrodes printed on either side of a semi-interpenetrated polymer network membrane in propylene carbonate solutions of three different electrolytes, and to compare their electroactive, actuation, and energy storage behavior. The balance of apparent faradaic and non-faradaic processes in each case is discussed. The results show that the primarily cation-dominated response of the trilayers in the three electrolytes is actually remarkably different, with some rather uncommon outcomes. The different balance of the apparent charging mechanisms makes it possible to clearly select one electrolyte for potential actuation and another for energy storage application scenarios

Ionic electroactive polymer artificial muscles in space applications

A large-scale effort was carried out to test the performance of seven types of ionic electroactive polymer (IEAP) actuators in space-hazardous environmental factors in laboratory conditions. The results substantiate that the IEAP materials are tolerant to long-term freezing and vacuum environments as well as ionizing Gamma-, X-ray, and UV radiation at the levels corresponding to low Earth orbit (LEO) conditions. The main aim of this material behaviour investigation is to understand and predict device service time for prolonged exposure to space environment