326 research outputs found
First principles study of a sodium borosilicate glass-former I: The liquid state
We use ab initio simulations to study the static and dynamic properties of a
sodium borosilicate liquid with composition 3Na_2O-B_2O_3-6SiO_2, i.e. a system
that is the basis of many glass-forming materials. In particular we focus on
the question how boron is embedded into the local structure of the silicate
network liquid. From the partial structure factors we conclude that there is a
weak nanoscale phase separation between silicon and boron and that the sodium
atoms form channel-like structures as they have been found in previous studies
of sodo-silicate glass-formers. Our results for the X-ray and neutron structure
factor show that this feature is basically unnoticeable in the former but
should be visible in the latter as a small peak at small wave-vectors. At high
temperatures we find a high concentration of three-fold coordinated boron atoms
which decreases rapidly with decreasing T, whereas the number of four-fold
coordinated boron atoms increases. Therefore we conclude that at the
experimental glass transition temperature most boron atoms will be four-fold
coordinated. We show that the transformation of [3]B into [4]B with decreasing
T is not just related to the diminution of non-bridging oxygen atoms as claimed
in previous studies, but to a restructuration of the silicate matrix. The
diffusion constants of the various elements show an Arrhenius behavior and we
find that the one for boron has the same value as the one of oxygen and is
significantly larger than the one of silicon. This shows that these two network
formers have rather different dynamical properties, a result that is also
confirmed from the time dependence of the van Hove functions. Finally we show
that the coherent intermediate scattering function for the sodium atoms is very
different from the incoherent one and that it tracks the one of the matrix
atoms.Comment: 15 pages; 14 figure
First principles study of a sodium borosilicate glass-former II: The glass state
We use ab initio simulations to investigate the properties of a sodium
borosilicate glass of composition 3Na_2O-B_2O_3-6SiO_2. We find that the
broadening of the first peak in the radial distribution functions g_BO(r) and
g_BNa(r) is due to the presence of trigonal and tetrahedral boron units as well
as to non-bridging oxygen atoms connected to BO_3 units. In agreement with
experimental results we find that the [3]B units involve a significant number
of non-bridging oxygens whereas the vast majority of [4]B have only bridging
oxygens. We determine the three dimensional distribution of the Na atoms around
the [3]B and [4]B units and use this information to explain why the sodium
atoms associated to the latter share more oxygen atoms with the central boron
atoms than the former units. From the distribution of the electrons we
calculate the total electronic density of states as well its decomposition into
angular momentum contributions. The vibrational density of states shows at high
frequencies a band that originates from the motion of the boron atoms.
Furthermore we show that the [3]B and [4]B units give rise to well defined
features in the spectrum which thus can be used to estimate the concentration
of these structural entities. The contribution of [3]B can be decomposed
further into symmetric and asymmetric parts that can also be easily identified
in the spectrum. We show that certain features in the spectrum can be used to
obtain information on the type of atom that is the second nearest neighbor of a
boron in the [4]B unit. We calculate the average Born charges on the bridging
and non-bridging oxygen atoms and show that these depend linearly on the angle
between the two bonds and the distance from the connected cation, respectively.
Finally we have calculated the frequency dependence of the dielectric function
as well as the absorption spectra.Comment: 18 pages; 16 figure
On the entanglement of electrostriction and non-linear piezoelectricity in non-centrosymmetric materials
International audienceAn extended and complete thermodynamical model of third-order electro-elastic coupling is proposed with symmetry analyses and density functional theory (DFT) calculations to evaluate consistently the various linear and non-linear coefficients. It is shown that in non-centrosymmetric materials, electrostrictive and non-linear piezoelectric phenomena are strongly coupled, except for materials crystallizing in a cubic lattice associated to the 432 point group. Thorough numerical results are given for GaN and AlN compounds in the WĂŒrtzite structure. Electrostriction dominates, but non-linear elasticity and non-linear piezoelectricity must be taken into account for strain evaluation whereas non-linear piezoelectricity yields a significant correction for electric field
Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications
Copyright 2014 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.International audienceFollowing pioneering works, the 3D hybrid lead-halide perovskites CH3NH3PbX3 (X=Cl, Br, I) have recently been shown to drastically improve the efficiency of Dye Sensitized Solar Cells (DSSC). It is predicted to open "a new era and a new avenue of research and development for low-cost solar cells ... likely to push the absolute power conversion efficiency toward that of CIGS (20%) and then toward and beyond that of crystalline silicon (25%)" (Snaith, H. J. Phys Chem. Lett. 4, 3623-3630 (2013).). Here, we investigate theoretically the crystalline phases of one of the hybrids relevant for photovoltaic applications, namely CH3NH3PbCl3. Critical electronic states and optical absorption are thoroughly investigated both in the low and high temperature phases. Our findings reveal the dramatic effect of spin orbit coupling on their multiple band gaps. Their physical properties are compared to those of conventional semiconductors, evidencing inversion of band edge states
Analysis of Multivalley and Multibandgap Absorption and Enhancement of Free Carriers Related to Exciton Screening in Hybrid Perovskites
International audienceSolution-processable metal-halide perovskites recently opened a new route toward low-cost manufacture of photovoltaic cells. Converting sunlight into electrical energy depends on several factors among which a broad absorption across the solar spectrum and attractive charge transport properties are of primary importance. Hybrid perovskites meet such prerequisites, but despite foremost experimental research efforts, their understanding remains scanty. Here we show that in these materials the appropriate absorption and transport properties are afforded by the multibandgap and multivalley nature of their band structure. We also investigate the nature of the photoexcited species. Our analysis suggests exciton screening by collective orientational motion of the organic cations at room temperature, leading to almost free carriers. Molecular collective motion is also expected to couple to carrier diffusion at room temperature. In mixed halides, our interpretation indicates that doping might hinder collective molecular motions, leading to good transport properties despite alloying and local lattice strain
Electronic surface states and dielectric self-energy profiles in colloidal nanoscale platelets of CdSe
International audienceThe electronic surface states and dielectric self-energy profiles in CdSe colloidal nanoscale platelets are explored by means of an original ab initio approach. In particular, we show how the different coatings deeply modify the quantum and dielectric confinement in CdSe nanoscale platelets. Molecular coating leads to an electronic band gap free of electronic surface states as well as an optimal surface coverage. The reduced blinking in CdSe nanoscale platelets is discussed. The theoretical method here proposed allows one to go beyond the popular empirical description of abrupt dielectric interfaces by explicitly describing the nanoplatelet surface morphology and polarisability at the atomic level. This theoretical study open the way toward more precise description of the dielectric confinement effect in any hybrid system exhibiting 2D electronic properties
Comment on âDensity functional theory analysis of structural and electronic properties of orthorhombic perovskite CH3NH3PbI3â by Y. Wang et al., Phys. Chem. Chem. Phys., 2014, 16, 1424â1429
International audienceYun Wang et al. used density functional theory (DFT) to investigate the orthorhombic phase of CH3NH3PbI3, which has recently shown outstanding properties for photovoltaic applications. Whereas their analysis of ground state properties may represent a valuable contribution to understanding this class of materials, effects of spinâorbit coupling (SOC) cannot be overlooked as was shown in earlier studies. Moreover, their discussion on optical properties may be misleading for non-DFT-experts, and the nice agreement between experimental and calculated band gap is fortuitous, stemming from error cancellations between SOC and many-body effects. Lastly, Bader charges suggest potential problems during crystal structure optimization
InAs QDs on InP : Polarization insensitive SOA and non-radiative Auger processes
International audienceAn efficient mechanical and electronic axial approximation of the strained 8x8 Hamiltonian is proposed for zinc-blende nanostructures with a cylindrical shape on (100) substrates. Vertically stacked InAs/InP columnar quantum dots (CQDs) for polarization insensitive semiconductor optical amplifier (SOA) in telecommunications applications are studied theoretically. Non-radiative Auger processes in InAs/InP quantum dots (QDs) are also investigated. It is shown that a multiband approach is necessary in both cases
Semianalytical model for simulation of electronic properties of narrow-gap strained semiconductor quantum nanostructures
International audienceA complete semianalytical model is proposed for the simulation of the electronic, mechanical, and piezoelectric properties of narrow-gap strained semiconductor quantum nanostructures. A transverse isotropic approximation for the strain and an axial approximation for the strained 8x8 Hamiltonian are proposed. It is applied extensively to the case of InAs/InP quantum dots (QDs). Symmetry analysis shows that there does exist a nonvanishing splitting on the electron P states due to the coupling with valence band. This splitting, which was not considered before, is found to be smaller in InAs/GaAs QD than in InAs/InP QD. Analytic expressions for the first and second order piezoelectric polarizations are used to evaluate the perturbation of electronic states
Quantum confinement and dielectric profiles of colloidal nanoplatelets of halide inorganic and hybrid organic-inorganic perovskites
International audienceQuantum confinement as well as high frequency Δâ and static Δs dielectric profiles are described for nanoplatelets of halide inorganic perovskites CsPbX3 (X = I, Br, Cl) and hybrid organic-inorganic perovskites (HOP) in two-dimensional (2D) and three-dimensional (3D) structures. 3D HOP are currently being sought for their impressive photovoltaic ability. Prior to this sudden popularity, 2D HOP materials were driving intense activity in the field of optoelectronics. Such developments have been enriched by the recent ability to synthesize colloidal nanostructures of controlled size of 2D and 3D HOP. This raises the need to achieve a thorough description of the electronic structure and dielectric properties of these systems. In this work, we go beyond the abrupt dielectric interface model and reach atomic scale description. We examine the influence of the nature of the halogen and of the cation on the band structure and dielectric constants. Similarly, we survey the effect of dimensionality and shape of the perovskite. In agreement with recent experimental results, we show an increase of the band gap and a decrease of Δâ when the size of a nanoplatelet reduces. By inspecting 2D HOP, we find that it cannot be described as a simple superposition of independent inorganic and organic layers. Finally, the dramatic impact of ionic contributions on the dielectric constant Δs is analysed
- âŠ