Extended plasticity in commercial-purity zinc

90% rolling-reduction of annealed commercial-purity zinc sheet (grain size 100 - 150 μ) results in the fragmentation of the large grains into, finally, stable micro-grains, 1 - 211 in diameter. The stability of the micro-grains is due to the presence of soluble and insoluble impurities which prevent recrystallization. This micro-grain material is strain-rate sensitive, and elongations of 200% have been obtained at room temperature. Although this as-rolled, 90% reduction zinc sheet is not super-plastic according to the current definition, its behaviour has led to the coining of the phase 'extended plasticity'. Evidence of grain-boundary sliding is found on examination of the surface by scanning electron microscopy, while the examination of thin foils and activation energy measurements support the dynamic softening (recovery) theory; thus, both these mechanisms must be operating, to a greater or less extent, to confer on this material the observe mechanical behaviour. It is finally concluded that it is dangerous to draw conclusions regarding the mechanism of plastic deformation from surface observations alone

Lattice realizations of unitary minimal modular invariant partition functions

The conformal spectra of the critical dilute A-D-E lattice models are studied numerically. The results strongly indicate that, in branches 1 and 2, these models provide realizations of the complete A-D-E classification of unitary minimal modular invariant partition functions given by Cappelli, Itzykson and Zuber. In branches 3 and 4 the results indicate that the modular invariant partition functions factorize. Similar factorization results are also obtained for two-colour lattice models.Comment: 18 pages, Latex, with minor corrections and clarification

Automating software design system DESTA

'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer

On the structure of the scalar mesons f0(975)f_0(975) and a0(980)a_0(980)

We investigate the structure of the scalar mesons $f_0(975)$ and $a_0(980)$ within realistic meson-exchange models of the $\pi\pi$ and $\pi\eta$ interactions. Starting from a modified version of the J\"ulich model for $\pi\pi$ scattering we perform an analysis of the pole structure of the resulting scattering amplitude and find, in contrast to existing models, a somewhat large mass for the $f_0(975)$ ($m_{f_0}=1015$ MeV, $\Gamma_{f_0}=30$ MeV). It is shown that our model provides a description of $J/\psi\rightarrow\phi\pi\pi/\phi KK$ data comparable in quality with those of alternative models. Furthermore, the formalism developed for the $\pi\pi$ system is consistently extended to the $\pi\eta$ interaction leading to a description of the $a_0(980)$ as a dynamically generated threshold effect (which is therefore neither a conventional $q\overline{q}$ state nor a $K\overline{K}$ bound state). Exploring the corresponding pole position the $a_0(980)$ is found to be rather broad ($m_{a_0}=991$ MeV, $\Gamma_{a_0}=202$ MeV). The experimentally observed smaller width results from the influence of the nearby $K\overline{K}$ threshold on this pole.Comment: 25 pages, 15 Postscript figure

Biodiversity and distribution of polar freshwater DNA viruses

Viruses constitute the most abundant biological entities and a large reservoir of genetic diversity on Earth. Despite the recent surge in their study, our knowledge on their actual biodiversity and distribution remains sparse. We report the first metagenomic analysis of Arctic freshwater viral DNA communities and a comparative analysis with other freshwater environments. Arctic viromes are dominated by unknown and single-stranded DNA viruses with no close relatives in the database. These unique viral DNA communities mostly relate to each other and present some minor genetic overlap with other environments studied, including an Arctic Ocean virome. Despite common environmental conditions in polar ecosystems, the Arctic and Antarctic DNA viromes differ at the fine-grain genetic level while sharing a similar taxonomic composition. The study uncovers some viral lineages with a bipolar distribution, suggesting a global dispersal capacity for viruses, and seemingly indicates that viruses do not follow the latitudinal diversity gradient known for macroorganisms. Our study sheds light into the global biogeography and connectivity of viral communities

Laminar flow control leading edge glove flight test article development

A laminar flow control (LFC) flight test article was designed and fabricated to fit into the right leading edge of a JetStar aircraft. The article was designed to attach to the front spar and fill in approx. 70 inches of the leading edge that are normally occupied by the large slipper fuel tank. The outer contour of the test article was constrained to align with an external fairing aft of the front spar which provided a surface pressure distribution over the test region representative of an LFC airfoil. LFC is achieved by applying suction through a finely perforated surface, which removes a small fraction of the boundary layer. The LFC test article has a retractable high lift shield to protect the laminar surface from contamination by airborne debris during takeoff and low altitude operation. The shield is designed to intercept insects and other particles that could otherwise impact the leading edge. Because the shield will intercept freezing rain and ice, a oozing glycol ice protection system is installed on the shield leading edge. In addition to the shield, a liquid freezing point depressant can be sprayed on the back of the shield