The SOAR Optical Imager

The SOAR Optical Imager (SOI) is the commissioning instrument for the 4.2-m SOAR telescope, which is sited on Cerro Pachón, and due for first light in April 2003. It is being built at Cerro Tololo Inter-American Observatory, and is one of a suite of first-light instruments being provided by the four SOAR partners (NOAO, Brazil, University of North Carolina, Michigan State University). The instrument is designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope, over a 6x6 arcmin field. Design goals include maintaining high throughput down to the atmospheric cut-off, and close reproduction of photometric passbands throughout 310-1050nm. The focal plane consists of a two-CCD mosaic of 2Kx4K Lincoln Labs CCDs, following an atmospheric dispersion corrector, focal reducer, and tip-tilt sensor. Control and data handling are within the LabVIEW-Linux environment used throughout the SOAR Project

The SOAR optical imager: status and first results

We briefly describe the SOAR Optical Imager (SOI), the first light instrument for the 4.1m SOuthern Astronomical Research (SOAR) telescope now being commissioned on Cerro Pachón in the mountains of northern Chile. The SOI has a mini-mosaic of 2 2kx4k CCDs at its focal plane, a focal reducer camera, two filter cartridges, and a linear ADC. The instrument was designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope over a 5.5x5.5 arcmin2 field with high throughput down to the atmospheric cut-off, and close reproduction of photometric pass-bands throughout 310-1050 nm. During early engineering runs in April 2004, we used the SOI to take images as part of the test program for the actively controlled primary mirror of the SOAR telescope, one of which we show in this paper. Taken just three months after the arrival of the optics in Chile, we show that the stellar images have the same diameter of 0.74" as the simultaneously measured seeing disk at the time of observation. We call our image "Engineering 1st Light" and in the near future expect to be able to produce images with diameters down to 0.3" in the R band over a 5.5' field during about 20% of the observing time, using the tip-tilt adaptive corrector we are implementing

The SOAR Optical Imager

The SOAR Optical Imager (SOI) is the commissioning instrument for the 4.2-m SOAR telescope, which is sited on Cerro Pachón, and due for first light in April 2003. It is being built at Cerro Tololo Inter-American Observatory, and is one of a suite of first-light instruments being provided by the four SOAR partners (NOAO, Brazil, University of North Carolina, Michigan State University). The instrument is designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope, over a 6x6 arcmin field. Design goals include maintaining high throughput down to the atmospheric cut-off, and close reproduction of photometric passbands throughout 310-1050nm. The focal plane consists of a two-CCD mosaic of 2Kx4K Lincoln Labs CCDs, following an atmospheric dispersion corrector, focal reducer, and tip-tilt sensor. Control and data handling are within the LabVIEW-Linux environment used throughout the SOAR Project

The SOAR optical imager: status and first results

We briefly describe the SOAR Optical Imager (SOI), the first light instrument for the 4.1m SOuthern Astronomical Research (SOAR) telescope now being commissioned on Cerro Pachón in the mountains of northern Chile. The SOI has a mini-mosaic of 2 2kx4k CCDs at its focal plane, a focal reducer camera, two filter cartridges, and a linear ADC. The instrument was designed to produce precision photometry and to fully exploit the expected superb image quality of the SOAR telescope over a 5.5x5.5 arcmin2 field with high throughput down to the atmospheric cut-off, and close reproduction of photometric pass-bands throughout 310-1050 nm. During early engineering runs in April 2004, we used the SOI to take images as part of the test program for the actively controlled primary mirror of the SOAR telescope, one of which we show in this paper. Taken just three months after the arrival of the optics in Chile, we show that the stellar images have the same diameter of 0.74" as the simultaneously measured seeing disk at the time of observation. We call our image "Engineering 1st Light" and in the near future expect to be able to produce images with diameters down to 0.3" in the R band over a 5.5' field during about 20% of the observing time, using the tip-tilt adaptive corrector we are implementing