Agro-food industry residues for biodiesel production: BIOFFA project

The aim of the project BIOFFA is to develop processes for the production of biofuels from residual raw-materials with high free fatty acid (FFA). In technological terms, two distinct approaches, leading to different final products, are being assessed: production of fatty acid methyl esters (FAME) – biodiesel, and hydrogenated oil – H-oil. Different residues available in Portugal, including poultry fat, cattle fat, olive pomace oil and used frying oils, were collected and characterised, and the objectives of the project will be considered to be met if it will be possible to produce mixtures of both biofuels (biodiesel + H-oil) similar to the nowadays commercially available formulas (biodiesel + petro-diesel) with the superior advantages of valorising residues and producing the overall mixture from biological materials

Biofuels and high value added products from the yeast Rhodosporidium toruloides NCYC 921: Strategies towards a true cost-effective and environmentally sustainable integrated multiproduct driven biorefinery [Poster]

Single-cell oils (SCO) have been considered a promising source of 3rd generation biofuels mainly in the final form of biodiesel. However, its high production costs have been a barrier towards the commercialization of this commodity. The fast growing yeast Rhodosporidium toruloides NCYC 921 has been widely reported as a potential SCO producing yeast. In addition to its well-known high lipid content (that can be converted into biodiesel), is rich in high value added products such as carotenoids with commercial interest. The process design and integration may contribute to reduce the overall cost of biofuels and carotenoid production and is a mandatory step towards their commercialization. The present work addresses the biomass disruption, extraction, fractionation and recovery of products with special emphasis on high added valued carotenoids (beta-carotene, torulene, torularhodin) and fatty acids directed to biodiesel. The chemical structure of torularhodin with a terminal carboxylic group imposes an additional extra challenge in what concern its separation from fatty acids. The proposed feedstock is fresh biomass pellet obtained directly by centrifugation from a 5L fed-batch fermentation culture broth. The use of a wet instead of lyophilised biomass feedstock is a way to decrease processing energy costs and reduce downstream processing time. These results will contribute for a detailed process design. Gathered data will be of crucial importance for a further study on Life-Cycle Assessment (LCA)

Exploring Scenedesmus obliquus and nannochloropsis sp. potential as a sustianable raw material for biofuels amd high added value compounds

In this work, the authors propose a microalga-based integrated system, where optimization of several energy vectors (biodiesel, bioethanol and bioH2) is highlighted under the concept of biorefinery (Project PTDC/AAC-AMB/100354/2008). This involves the integration of different processes such as oil and sugar extraction from microalgae for biodiesel and bioethanol production respectively, and bioH2 production from the whole and/or biomass leftovers. The extraction of high value added compounds, such as carotenoids, contributes to the economic viability of the overall process

Food and fuel microalgae applications: insights from portuguese experience [Resumo]

Microalgae have a wide range of application fields, from food to fuels, to pharmaceuticals & fine chemicals, aquaculture and environmental bioremediation, among others. Spirulina and Chlorella have been used as food sources since ancient times, due to their high and balanced nutritional value. Our research group in Lisbon has developed a range of food products (emulsions, gelled desserts, biscuits and pastas) enriched with freshwater and marine microalgae (Spirulina, Chlorella, Haematococcus, Isochrysis and Diacronema). The developed products presented attractive and stable colours, high resistance to oxidation and enhanced rheological properties. Some of these products will be prepared at the Post-Congress Course “Functional Foods Development” at the University of Antofagasta. More recently, a great interest has arisen on using microalgae for biofuel production. The same group has also been exploring several marine and freshwater species for biofuel production (e.g., biodiesel, bioethanol, biohydrogen and biomethane) within a biorefinery approach, in order to obtain high and low-value co-products using integral biomass maximizing the energy revenue. Namely, supercritical fluid extraction of Nannochloropsis sp. allowed the recovery of valuable carotenoids and lipids, prior to bioH2 production through dark fermentation of the residual biomass. Also, Scenedesmus obliquus residues after sugars (for bioethanol) and lipids (for biodiesel) extraction has been anaerobically digested attaining high biomethane yields. Regarding sustainability issues, the current trend of our group is now focused on using liquid effluents and high CO2 levels for low cost microalgae growth, contributing to a lower water demand, primary energy consumption and global warming potential by reducing the need for potable water and fertilizers (P, N) and increasing CO2 mitigation. Microalgae biomass has been successfully used for urban wastewater treatment with subsequent bioH2 production, in a biorefinery approach. Presently, ammonium-rich raw effluents from piggeries and poultry industry are being effectively used for microalgae growth avoiding any pre-treatment step

Estimativa de potenciais técnicos de energia renovável em Portugal: eólico, solar fotovoltaico, solar concentrado, biomassa e oceanos

Executive Summary: There is a clear need to accelerate the energy transition, including the implementation of renewable electricity production plants, as well as the increase in consumption of other renewable energy carriers in buildings, industry, transport and other sectors. This work provides key information to make this transition possible, that is, the technical renewable energy potentials for Portugal. The aim is thus to contribute to policy support, as well as to decision-making by various Portuguese stakeholders (public and private) in the domains of energy, energy transition and greenhouse gases emissions mitigation. The work presents the technical renewable energy potentials for Portugal to: (i) decentralized solar photovoltaic (PV) plants in artificialized (or built-up) areas; (ii) centralized solar PV plants in non-artificialized (or natural) areas; (iii) concentrated solar power; (iv) onshore wind; (v) offshore wind (floating and fixed); (vi) bioenergy, and (vii) solar thermal. The wave energy primary energy resource potential is also presented (not the technical potential). The technical potential values of renewable energy sources (RES) presented are dynamic values, given the substantial uncertainty associated with their estimation. The study identifies technical RES potentials i.e., the technically viable energy generation achievable from a specific technology, considering the primary energy resource available and the geographic, environmental and land use limitations. RES economic potentials represent the fraction of RES technical potential that is economically viable, but they are not presented in this work. Likewise, this report does not address market potential, that translate the capacity and energy generation that the market effectively manages to implement. The presented RES technical potentials include the total capacity currently installed in the country. The technical potentials are estimated mostly for mainland Portugal, in most cases with a spatial disaggregation of at least NUT2 and sometimes for NUT5 and/or type of building. Despite adopting an approach based on a territorial analysis in which some areas of the country are excluded, this potential does not correspond to the work done in mapping less-sensitive areas towards future definition of RES “Go-To Areas”. The decentralized solar PV potential in artificialized areas is divided into 6 area types: industrial areas; commercial buildings; residential and mixed-use buildings; villas; health, education, cultural, tourist and military buildings, and other land uses (including parking lots and patios, ports, waste and wastewater treatment infrastructure, sports facilities, among others). It is estimated a technical potential of 23.33 GW that could generate up to 36.84 TWh/year. This potential is distributed throughout the entire territory of mainland Portugal but is higher in the North and Center regions. The RES technical potential for centralized solar PV was estimated as a range of values that translate the uncertainty associated with using different levels of concern in excluding certain areas in which solar PV can be deployed (for example to safeguard ecosystems, water resources, agriculture or archaeological heritage). The centralized solar PV potential varies between 168.82 GW and 45.63 GW. The maximum threshold of installed capacity could generate 278.11 TWh/year of electricity. The value is high and reflects on the one hand, the excellence of the solar resource throughout the country, and on the other, the large size of the considered areas. The CSP potential is 62.6 GW with a corresponding electrical production potential of 183.61 TWh/year. It is mainly located in the Alentejo region, although other areas have also been identified in other regions of the country. The wind onshore technical potential is 15.7 GW, that could generate 37.13 TWh/year, taking into account the safeguarding of various areas for the protection of ecosystems and also social acceptability issues. In the case of offshore wind and considering a capacity density of 4 MW/km2 for floating offshore and 5.5 MW/km2 for fixed offshore, a total of 36 GW and 2 GW are obtained, respectively. This capacity could generate up to 126.14 TWh/year (floating offshore) or 6.31 TWh/year (fixed offshore). The solar thermal energy potential focused residential and service buildings (such as nursing homes, barracks, etc., tourism, hospitals, indoor swimming pools and other sports facilities). The potential is of 0.95 GWt and 0.95 TWh/year for service buildings, 7.26 GWt and 5.84 TWh/year for residential buildings. For industry there is a potential of 1.06 GWt, which could generate up to 1.15 TWh/year for applications up to 160 ºC. The total technical potential of solar thermal is 9.25 GWt and 7.93 TWh/year of thermal energy generated, with a substantial weight of residential buildings in the total value. Potential values are disaggregated by NUTS III and type of building. In terms of biomass and bioenergy potential, annual values of forest biomass, agricultural biomass, agro-industrial waste, urban waste and wastewater treatment are estimated, totaling around 58 TWh/year. Regarding the production of biofuels (HVO and FAME) it is estimated that the annual production of domestic used oils and other similar residues is 1.4 TWh/year. The use of oils from food crops such as soybean, sunflower and rapeseed is limited by European (and national) policy guidelines and is 2.1 TWh/year. Regarding wave energy, the resource potential is estimated between 1.4 GW for 80 m bathymetry and 4.8 for 20 m bathymetry. There are substantial uncertainties associated with the presented values, inherent to the methodological approach considered. Nevertheless, these estimates are a valuable starting point to be refined and improved in subsequent updates.N/

Bioethanol production from Scenedesmus obliquus sugars: the influence of photobioreactors and culture conditions on biomass production

A closed-loop vertical tubular photobioreactor (PBR), specially designed to operate under conditions of scarce flat land availability and irregular solar irradiance conditions, was used to study the potential of Scenedesmus obliquus biomass/sugar production. The results obtained were compared to those from an open-raceway pond and a closed-bubble column. The influence of the type of light source and the regime (natural vs artificial and continuous vs light/dark cycles) on the growth of the microalga and the extent of the sugar accumulation was studied in both PBRs. The best type of reactor studied was a closed-loop PBR illuminated with natural light/dark cycles. In all the cases, the relationship between the nitrate depletion and the sugar accumulation was observed. The microalga Scenedesmus was cultivated for 53 days in a raceway pond (4,500 L) and accumulated a maximum sugar content of 29 % g/g. It was pre-treated for carrying out ethanol fermentation assays, and the highest ethanol concentration obtained in the hydrolysate fermented by Kluyveromyces marxianus was 11.7 g/L

Pre-treatment optimization of Scenedesmus obliquus microalga for bioethanol production

The present work deals with the optimization of cellular disruption and sugar extraction from the microalgae Scenedesmusobliquus (Sc) for bioethanol production. Among the physical and physicochemical methods tested, the best results were obtained with acid hydrolysis by H2SO4 (2 N), at 120 °C for 30 min and using dried biomass. The sugar extraction efficiency level reached was 95.6% when compared to the harsh quantitative acid hydrolysis. The influence of other parameters such as biomass loading and number of extraction cycles were also evaluated. The results obtained in the latter case showed that a unique hydrolysis step is sufficient

Use of Multi-parameter Flow Cytometry as Tool to Monitor the Impact of Formic Acid on Saccharomyces carlsbergensis Batch Ethanol Fermentations

The use of lignocellulosic materials as substrate for bioethanol production is considered a cost-effective approach to make the biofuel production process economically sustainable. However, lignocellulosic hydrolysis releases toxic compounds such as weak acids which inhibit microorganism growth and ethanol production. In order to understand the physiological response of Saccharomyces carlsbergensis when fermenting glucose in the presence of formic acid (HF), the yeast growth was monitored by multi-parameter flow cytometry. Cytoplasmic membrane potential decreased as the HF concentration increased and as the yeast culture reached the stationary phase. However, the proportion of cells with permeabilized membrane did not increase with the HF concentration increase. The accumulation of reactive oxygen species was also monitored. Control and fermentations at low HF concentrations (<1 g/L) resulted in a high proportion of highly oxidized cells at the stationary phase. The multi-parameter flow cytometry approach proved to be a useful tool to monitor the physiological stress response of S. carlsbergensis growth and ethanol production in the presence of HF, an inhibitor present in lignocellulosic hydrolysates. The information here obtained at near real time can be used to enhance second-generation bioethanol production process efficiency

Sequential carotenoids extraction and biodiesel production from Rhodosporidium toruloides NCYC 921 biomass

ABSTRACT: A new process for co-extraction and separation of fatty acids and carotenoids from Rhodosporidium toruloides NCYC 921 biomass in order to achieve full exploitation of the yeast lipidic fraction is described. A saponification of the wet yeast biomass was performed using a potassium hydroxide solution (1.1 M) in ethanol 96%, at 65 °C for 180 min. In the carotenoid extraction step, a biphasic system with an organic: aqueous phases ratio of 0.49 mL/mL and a water content of 18.9% (w/w) was used. In the presence of an acid catalyst, the fatty acid fraction was esterified into fatty acids ethyl esters. The yeast biomass downstream processing allowed reaching a fatty acid and total carotenoids recovery yields of 91.0% and 85.2%, respectively. The process reported here takes advantage of various components of the yeast biomass, therefore maximizing the value derived from the biomass feedstock, with a minimal environmental impact within the frame of circular bioeconomy.info:eu-repo/semantics/acceptedVersio