28 research outputs found
The bridge volcanic LIdar-BILLI: A review of data collection and processing techniques in the Italian most hazardous volcanic areas
Volcanologists have demonstrated that carbon dioxide (CO2) fluxes are precursors of volcanic eruptions. Controlling volcanic gases and, in particular, the CO2 flux, is technically challenging, but we can retrieve useful information from magmatic/geological process studies for the mitigation of volcanic hazards including air traffic security. Existing techniques used to probe volcanic gas fluxes have severe limitations such as the requirement of near-vent in situ measurements, which is unsafe for operators and deleterious for equipment. In order to overcome these limitations, a novel range-resolved DIAL-Lidar (Differential Absorption Light Detection and Ranging) has been developed as part of the ERC (European Research Council) Project "BRIDGE", for sensitive, remote, and safe real-time CO2 observations. Here, we report on data collection, processing techniques, and the most significant findings of the experimental campaigns carried out at the most hazardous volcanic areas in Italy: Pozzuoli Solfatara (Phlegraen Fields), Stromboli, and Mt. Etna. The BrIdge voLcanic LIdar-BILLI has successfully obtained accurate measurements of in-plume CO2 concentration and flux. In addition, wind velocity has also been retrieved. It has been shown that the measurements of CO2 concentration performed by BILLI are comparable to those carried out by volcanologists with other standard techniques, heralding a new era in the observation of long-term volcanic gases
. New ground-based lidar enables volcanic CO2 flux measurements
There have been substantial advances in the ability to monitor the activity of hazardous volcanoes
in recent decades. However, obtaining early warning of eruptions remains challenging, because the
patterns and consequences of volcanic unrests are both complex and nonlinear. Measuring volcanic
gases has long been a key aspect of volcano monitoring since these mobile fluids should reach the
surface long before the magma. There has been considerable progress in methods for remote and
in-situ gas sensing, but measuring the flux of volcanic CO2—the most reliable gas precursor to an
eruption—has remained a challenge. Here we report on the first direct quantitative measurements
of the volcanic CO2 flux using a newly designed differential absorption lidar (DIAL), which were
performed at the restless Campi Flegrei volcano. We show that DIAL makes it possible to remotely
obtain volcanic CO2 flux time series with a high temporal resolution (tens of minutes) and accuracy
(<30%). The ability of this lidar to remotely sense volcanic CO2 represents a major step forward
in volcano monitoring, and will contribute improved volcanic CO2 flux inventories. Our results also
demonstrate the unusually strong degassing behavior of Campi Flegrei fumaroles in the current
ongoing state of unrest
Detection of pollutant sources in the atmosphere with Lidar/Dial techniques: Results of an experimental campaign in the south of Italy
In the last years, surveying large regions of the atmosphere in an automatic way, for early detection of pollutant sources in urban and industrial areas, has become a strategic objective of various public health organizations. The Lidar/Dial technique has become a well-established laser remote sensing method for atmosphere monitoring. It is often used to probe almost any level of the atmosphere and to acquire information necessary to validate theoretical models about different topics of atmospheric physics. It can also be deployed for environment surveying by monitoring particles, aerosols and molecules. For these reasons, an experimental campaign for evaluating the performances of a Lidar/Dial system in detecting pollutants (particulate and/or chemical compounds) has been carried out in an industrial area in the south of Italy. In this work, a homemade Lidar/Dial system (developed and built by the authors) and the results of the experimental campaign will be presented and discussed. © 2014 AEIT
Lidar detection of carbon dioxide in volcanic plumes
Volcanic gases give information on magmatic processes. In particular, anomalous releases of carbon dioxide precede volcanic eruptions. Up to now, this gas has been measured in volcanic plumes with conventional measurements that imply the severe risks of local sampling and can last many hours. For these reasons and for the great advantages of laser sensing, the thorough development of volcanic lidar has been undertaken at the Diagnostics and Metrology Laboratory (UTAPRAD-DIM) of the Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA). In fact, lidar profiling allows one to scan remotely volcanic plumes in a fast and continuous way, and with high spatial and temporal resolution. Two differential absorption lidar instruments will be presented in this paper: BILLI (BrIdge voLcanic LIdar), based on injection seeded Nd:YAG laser, double grating dye laser, difference frequency mixing (DFM) and optical parametric amplifier (OPA), and VULLI (VULcamed Lidar), based on injection seeded Nd:YAG laser and optical parametric oscillator (OPO). The first one is funded by the ERC (European Research Council) project BRIDGE and the second one by the ERDF (European Regional Development Fund) project VULCAMED. While VULLI has not yet been tested in a volcanic site, BILLI scanned the gas emitted by Pozzuoli Solfatara (Campi Flegrei volcanic area, Naples, Italy) during a field campaign carried out from 13 to 17 October 2014. Carbon dioxide concentration maps were retrieved remotely in few minutes in the crater area. Lidar measurements were in good agreement with well-established techniques, based on different operating principles. To our knowledge, it is the first time that carbon dioxide in a volcanic plume is retrieved by lidar, representing the first direct measurement of this kind ever performed on an active volcano and showing the high potential of laser remote sensing in geophysical research
Detection of pollutant sources in the atmosphere with Lidar/Dial techniques: Results of an experimental campaign in the south of Italy
In the last years, surveying large regions of the atmosphere in an automatic way, for early detection of pollutant sources in urban and industrial areas, has become a strategic objective of various public health organizations. The Lidar/Dial technique has become a well-established laser remote sensing method for atmosphere monitoring. It is often used to probe almost any level of the atmosphere and to acquire information necessary to validate theoretical models about different topics of atmospheric physics. It can also be deployed for environment surveying by monitoring particles, aerosols and molecules. For these reasons, an experimental campaign for evaluating the performances of a Lidar/Dial system in detecting pollutants (particulate and/or chemical compounds) has been carried out in an industrial area in the south of Italy. In this work, a homemade Lidar/Dial system (developed and built by the authors) and the results of the experimental campaign will be presented and discussed. © 2014 AEIT
Volcanic plume CO2 flux measurements at mount etna by mobile differential absorption lidar
Volcanic eruptions are often preceded by precursory increases in the volcanic carbon dioxide (CO2) flux. Unfortunately, the traditional techniques used to measure volcanic CO2 require near-vent, in situ plume measurements that are potentially hazardous for operators and expose instruments to extreme conditions. To overcome these limitations, the project BRIDGE (BRIDging the gap between Gas Emissions and geophysical observations at active volcanoes) received funding from the European Research Council, with the objective to develop a new generation of volcanic gas sensing instruments, including a novel DIAL-Lidar (Differential Absorption Light Detection and Ranging) for remote (e.g., distal) CO2 observations. Here we report on the results of a field campaign carried out at Mt. Etna from 28 July 2016 to 1 August 2016, during which we used this novel DIAL-Lidar to retrieve spatially and temporally resolved profiles of excess CO2 concentrations inside the volcanic plume. By vertically scanning the volcanic plume at different elevation angles and distances, an excess CO2 concentration of tens of ppm (up to 30% above the atmospheric background of 400 ppm) was resolved from up to a 4 km distance from the plume itself. From this, the first remotely sensed volcanic CO2 flux estimation from Etna\u2019s northeast crater was derived at 482850-3900 tons/day. This Lidar-based CO2 flux is in fair agreement with that ( 482750 tons/day) obtained using conventional techniques requiring the in situ measurement of volcanic gas composition
Volcanic CO2 detection with a DFM/OPA-based lidar
The DFM/OPA-based lidar BILLI was used to investigate the volcanic plume released by the hydrothermal vent of Pisciarelli, in the Campi Flegrei volcano. BILLI remotely measured CO2 concentrations in cross-sections of the nearvent plume using the differential absorption technique. To our knowledge, this is the first example of lidar-based measurement of volcanic CO2 . The spatial resolution was 1.5 m and the temporal resolution 20 s
Early detection of volcanic hazard by lidar measurement of carbon dioxide
Volcanic gases give information on magmatic processes. In particular, anomalous releases of carbon dioxide precede volcanic eruptions. Up to now, this gas has been measured in volcanic plumes with conventional measurements that imply the severe risks of local sampling and can last many hours. For these reasons and for the great advantages of laser sensing, the thorough development of volcanic lidars has been undertaken at ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic Development). In fact, lidar profiling allows one to scan remotely volcanic plumes in a fast and continuous way, and with high spatial and temporal resolution. A differential absorption lidar instrument will be presented in this paper: BILLI (BrIdge voLcanic LIdar). It is based on injection-seeded Nd:YAG laser, double-grating dye laser, difference frequency mixing and optical parametric amplifier. BILLI is funded by the ERC (European Research Council) project BRIDGE (BRIDging the gap between Gas Emissions and geophysical observations at active volcanos). It scanned the gas emitted by Pozzuoli Solfatara (Naples, Italy) and Stromboli Volcano (Sicily, Italy) during field campaigns carried out from October 13 to 17, 2014, and from June 24 to 29, 2015, respectively. Carbon dioxide concentration maps were retrieved remotely in few minutes in the crater areas. To our knowledge, it is the first time that carbon dioxide in a volcanic plume is retrieved by lidar. This result represents the first direct measurement of this kind ever performed on active volcanos and shows the high potential of laser remote sensing in early detection of volcanic hazard