Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating

Microwave processing holds great potential for improving current composite manufacturing techniques, substantially reducing cure cycle times, energy requirements and operational costs. In this paper, microwave heating was incorporated into the resin transfer moulding technique. Through the use of microwave heating, a 50% cure cycle time reduction was achieved. The mechanical and physical properties of the produced carbon fibre/epoxy composites were compared to those manufactured by conventional resin transfer moulding. Mechanical testing showed similar values of flexural moduli and flexural strength for the two types of composites after normalisation of the corresponding data to a common fibre volume fraction. A 9% increase of the interlaminar shear strength (ILSS) was observed for the microwave cured composites. This enhancement in ILSS is attributed to a lowering of resin viscosity in the initial stage of the curing process, which was also confirmed via scanning electron microscopy by means of improved fibre wetting and less fibre pull-out. Furthermore, both types of composites yielded minimal void content

What are communities of practice? A comparative review of four seminal works

This paper is a comparative review of four seminal works on communities of practice. It is argued that the ambiguities of the terms community and practice are a source of the concept's reusability allowing it to be reappropriated for different purposes, academic and practical. However, it is potentially confusing that the works differ so markedly in their conceptualizations of community, learning, power and change, diversity and informality. The three earlier works are underpinned by a common epistemological view, but Lave and Wenger's 1991 short monograph is often read as primarily about the socialization of newcomers into knowledge by a form of apprenticeship, while the focus in Brown and Duguid's article of the same year is, in contrast, on improvising new knowledge in an interstitial group that forms in resistance to management. Wenger's 1998 book treats communities of practice as the informal relations and understandings that develop in mutual engagement on an appropriated joint enterprise, but his focus is the impact on individual identity. The applicability of the concept to the heavily individualized and tightly managed work of the twenty-first century is questionable. The most recent work by Wenger – this time with McDermott and Snyder as coauthors – marks a distinct shift towards a managerialist stance. The proposition that managers should foster informal horizontal groups across organizational boundaries is in fact a fundamental redefinition of the concept. However it does identify a plausible, if limited, knowledge management (KM) tool. This paper discusses different interpretations of the idea of 'co-ordinating' communities of practice as a management ideology of empowerment

Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating

Microwave processing holds great potential for improving current composite manufacturing techniques, substantially reducing cure cycle times, energy requirements and operational costs. In this paper, microwave heating was incorporated into the resin transfer moulding technique. Through the use of microwave heating, a 50% cure cycle time reduction was achieved. The mechanical and physical properties of the produced carbon fibre/epoxy composites were compared to those manufactured by conventional resin transfer moulding. Mechanical testing showed similar values of flexural moduli and flexural strength for the two types of composites after normalisation of the corresponding data to a common fibre volume fraction. A 9% increase of the interlaminar shear strength (ILSS) was observed for the microwave cured composites. This enhancement in ILSS is attributed to a lowering of resin viscosity in the initial stage of the curing process, which was also confirmed via scanning electron microscopy by means of improved fibre wetting and less fibre pull-out. Furthermore, both types of composites yielded minimal void content