Measurement-based analysis of the dynamic performance of microgrids using system identification techniques

The dynamic performance of microgrids is of crucial importance, due to the increased complexity introduced by the combined effect of inverter interfaced and rotating distributed generation. This paper presents a methodology for the investigation of the dynamic behavior of microgrids based on measurements using Prony analysis and state-space black-box modeling techniques. Both methods are compared and evaluated using real operating conditions data obtained by a laboratory microgrid system. The recorded responses and the calculated system eigenvalues are used to analyze the system dynamics and interactions among the distributed generation units. The proposed methodology can be applied to any real-world microgrid configuration, taking advantage of the future smart grid technologies and features

Dynamic performance of a low voltage microgrid with droop controlled distributed generation

Microgrids are small-scale highly controlled networks designed to supply electrical energy. From the operational point of view, microgrids are active distribution networks, facilitating the integration of distributed generation units. Major technical issues in this concept include system stability and protection coordination which are significantly influenced by the high penetration of inverter-interfaced distributed energy sources. These units often adopt the frequency-active power and voltage-reactive power droop control strategy to participate in the load sharing of an islanded microgrid. The scope of the paper is to investigate the dynamic performance of a low voltage laboratory-scale microgrid system, using experimental results and introduce the concept of Prony analysis for understanding the connected components. Several small disturbance test cases are conducted and the investigations focus on the influence of the droop controlled distributed generation sources

Development of measurement-based load models for the dynamic simulation of distribution grids

The advent of new types of loads, such as power electronics and the increased penetration of low-inertia motors in the existing distribution grids alter the dynamic behavior of conventional power systems. Therefore, more accurate dynamic, aggregate, load models are required for the rigorous assessment of the stability limits of modern distribution networks. In this paper, a measurement-based, input/output, aggregate load model is proposed, suitable for dynamic simulations of distribution grids. The new model can simulate complex load dynamics by employing variable-order transfer functions. The minimum required model order is automatically determined through an iterative procedure. The applicability and accuracy of the proposed model are thoroughly evaluated under distinct loading conditions and network topologies using measurements acquired from a laboratory-scale test setup. Furthermore, the performance of the proposed model is compared against other conventional load models, using the mean absolute percentage error

Artificial-intelligence method for the derivation of generic aggregated dynamic equivalent models

Aggregated equivalent models for the dynamic analysis of active distribution networks (ADNs) can be efficiently developed using dynamic responses recorded through field measurements. However, equivalent model parameters are highly affected from the time-varying composition of power system loads and the stochastic behavior of distributed generators. Thus, equivalent models, developed through in situ measurements, are valid only for the operating conditions from which they have been derived. To overcome this issue, in this paper, a new method is proposed for the derivation of generic aggregated dynamic equivalent models, i.e., for equivalent models that can be used for the dynamic analysis of a wide range of network conditions. The method incorporates clustering and artificial neural network techniques to derive robust sets of parameters for a variable-order dynamic equivalent model. The effectiveness of the proposed method is evaluated using measurements recorded on a laboratory-scale ADN, while its performance is compared with a conventional technique. The corresponding results reveal the applicability of the proposed approach for the analysis and simulation of a wide range of distinct network conditions

Inertia Estimation of Synchronous Devices: Review of Available Techniques and Comparative Assessment of Conventional Measurement-Based Approaches

The increasing deployment of renewable energy sources (RESs) reduces the inertia levels of modern power systems, raising frequency stability issues. Therefore, it becomes crucial, for power-system operators, to monitor system inertia, in order to activate proper preventive remedial actions in a timely way, ensuring, this way, the reliable and secure operation of the power system. This paper presents a brief review of available techniques for inertia estimation of synchronous devices. Additionally, a comparative assessment of conventional measurement-based inertia-estimation techniques is performed. In particular, five conventional inertia-estimation techniques are considered and examined. The distinct features of each method are presented and discussed. The effect of several parameters on the accuracy of the examined methods is evaluated via Monte Carlo analysis. The performance of the examined methods is evaluated using dynamic responses, obtained via RMS simulations, conducted on the IEEE 9 bus test system. Based on the conducted analysis, recommendations to enhance the accuracy of the examined techniques are proposed

Inertia Estimation of Synchronous Devices: Review of Available Techniques and Comparative Assessment of Conventional Measurement-Based Approaches

The increasing deployment of renewable energy sources (RESs) reduces the inertia levels of modern power systems, raising frequency stability issues. Therefore, it becomes crucial, for power-system operators, to monitor system inertia, in order to activate proper preventive remedial actions in a timely way, ensuring, this way, the reliable and secure operation of the power system. This paper presents a brief review of available techniques for inertia estimation of synchronous devices. Additionally, a comparative assessment of conventional measurement-based inertia-estimation techniques is performed. In particular, five conventional inertia-estimation techniques are considered and examined. The distinct features of each method are presented and discussed. The effect of several parameters on the accuracy of the examined methods is evaluated via Monte Carlo analysis. The performance of the examined methods is evaluated using dynamic responses, obtained via RMS simulations, conducted on the IEEE 9 bus test system. Based on the conducted analysis, recommendations to enhance the accuracy of the examined techniques are proposed

USE Efficiency: an innovative educational programme for energy efficiency in buildings

Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme

Closed-Form Expressions for the Analysis of Wave Propagation in Overhead Distribution Lines

The calculation of the influence of the imperfect earth on overhead conductors is an important issue in power system analysis. Rigorous solutions contain infinite integrals; thus, due to their complex form, different simplified closed-form expressions have been proposed in the literature. This paper presents a detailed analysis of the effect of different closed-form expressions on the investigation of the wave propagation of distribution overhead lines (OHLs). A sensitivity analysis is applied to determine the most important properties influencing the calculation of the OHL parameters. The accuracy of several closed-form earth impedance models is evaluated as well as the influence of the displacement current and imperfect earth on the shunt admittance, which are further employed in the calculation of the propagation characteristics of OHLs. The frequency-dependence of the soil electrical properties, as well as the application of different modal decomposition algorithms, are also investigated. Finally, results on the basis of frequency-domain signal scans and time-domain electromagnetic transient responses are also discussed