106 research outputs found
Hydrological and Hydraulic Flood Hazard Modeling in Poorly Gauged Catchments: An Analysis in Northern Italy
Flood hazard is assessed for a watershed with scarce hydrological data in the lower plain
of Northern Italy, where the current defense system is inadequate to protect a highly populated
urban area located at a river confluence and crossed by numerous bridges. An integrated approach
is adopted. Firstly, to overcome the scarcity of data, a regional flood frequency analysis is performed
to derive synthetic design hydrographs, with an original approach to obtain the flow reduction
curve from recorded water stages. The hydrographs are then imposed as upstream boundary
conditions for hydraulic modeling using the fully 2D shallow-water model PARFLOOD with the
recently proposed inclusion of bridges. Highâresolution simulations of the potential flooding in the
urban center and surrounding areas are, therefore, performed as a novel extensive application of a
truly 2D framework for bridge modeling. Moreover, simulated flooded areas and water levels, with
and without bridges, are compared to quantify the interference of the crossing structures and to
assess the effectiveness of a structural measure for flood hazard reduction, i.e., bridge adaptation.
This work shows how the use of an integrated hydrologicalâhydraulic approach can be useful for
infrastructure design and civil protection purposes in a poorly gauged watershed
Experimental and numerical evaluation of the force due to the impact of a dam-break wave on a structure
Flood events caused by the collapse of dams or river levees can have damaging consequences on buildings and infrastructure located in prone areas. Accordingly, a careful prediction of the hydrodynamic load acting on structures is important for flood hazard assessment and potential damage evaluation. However, this represents a challenging task and requires the use of suitable mathematical models. This paper investigates the capability of three different models, i.e. a 2D depth-averaged model, a 3D Eulerian two-phase model, and a 3D Smoothed Particle Hydrodynamics (SPH) model, to estimate the impact load exerted by a dam-break wave on an obstacle. To this purpose, idealised dam-break experiments were carried out by generating a flip-through impact against a rigid squat structure, and measurements of the impact force were obtained directly by using a load cell. The dynamics of the impact event was analyzed and related to the measured load time history. A repeatability analysis was performed due to the great variability typically shown by impact phenomena, and a confidence range was estimated. The comparison between numerical results and experimental data shows the capability of 3D models to reproduce the key features of the flip-through impact. The 2D modelling based on the shallow water approach is not entirely suitable to accurately reproduce the load hydrograph and predict the load peak values; this difficulty increases with the strength of the wave impact. Nevertheless, the error in the peak load estimation is in the order of 10% only, thus the 2D approach may be considered appropriate for practical applications. Moreover, when the shallow water approximation is expected to work well, 2D results are comparable with the experimental data, as well as with the numerical predictions of far more sophisticated and computationally demanding 3D solvers. All the numerical models overestimate the falling limb of the load hydrograph after the impact. The SPH model ensures good evaluation of the long-time load impulse. The 2D shallow water solver and the 3D Eulerian model are less accurate in predicting the load impulse but provide similar results. A sensitivity analysis with respect to the model parameters allows to assess model uncertainty
Un modello 2D con porosit\ue0 per lo studio di allagamenti a larga scala in aree urbane
-Modello 2D con porosit\ue0 per lo studio a larga scala di allagamenti in aree urbane.
-Introdotta una formulazione della porosit\ue0 di flusso anisotropa che evita la dipendenza dalla griglia.
-Il modello \ue8 in grado di riprodurre la soluzione di riferimento sulla base di soli parametri geometrici.
-L\u2019applicazione a casi studio con batimetrie reali \ue8 in fase di sviluppo
Flood inundation modeling in urbanized areas: A mesh-independent porosity approach with anisotropic friction
In the present work, a porosity-based numerical scheme for the Shallow Water Equations is presented. With the aim of accounting for the presence of storage areas, such as gardens, yards and dead zones, and for preferential flow pathways, both an isotropic storage porosity parameter and anisotropic friction are adopted. Particularly, the anisotropic effects due to the building alignments are evaluated defining conveyance porosities along principal directions and using them to express the friction losses in tensor form. The storage and conveyance porosities are evaluated from the geometry of the urban layout at a district scale and then assigned to computational cells rather than to cell sides, thus avoiding oversensitivity to the mesh design. The proposed formulation guarantees the C-property also in presence of wet-dry fronts. Model testing is performed analyzing schematic and idealized urban layouts, and against experimental data as well. The results obtained by the proposed anisotropic scheme are similar to a high-resolution model with resolved buildings, also in the presence of low-friction regimes, meanwhile with a remarkable reduction of the computational times
Discharge hydrograph estimation at upstream-ungauged sections by coupling a Bayesian methodology and a 2-D GPU shallow water model
Abstract. This paper presents a novel methodology for estimating the unknown discharge
hydrograph at the entrance of a river reach when no information is available.
The methodology couples an optimization procedure based on the Bayesian
geostatistical approach (BGA) with a forward self-developed 2-D hydraulic
model. In order to accurately describe the flow propagation in real rivers
characterized by large floodable areas, the forward model solves the 2-D
shallow water equations (SWEs) by means of a finite volume explicit
shock-capturing algorithm. The two-dimensional SWE code exploits the
computational power of graphics processing units (GPUs), achieving a ratio of
physical to computational time of up to 1000. With the aim of enhancing the
computational efficiency of the inverse estimation, the Bayesian technique is
parallelized, developing a procedure based on the Secure Shell (SSH) protocol
that allows one to take advantage of remote high-performance computing
clusters (including those available on the Cloud) equipped with GPUs. The
capability of the methodology is assessed by estimating irregular and
synthetic inflow hydrographs in real river reaches, also taking into account
the presence of downstream corrupted observations. Finally, the procedure is
applied to reconstruct a real flood wave in a river reach located in northern
Italy
Sutureless and rapid deployment implantation in bicuspid aortic valve: results from the sutureless and rapid-deployment aortic valve replacement international registry.
Background
Benefits of sutureless and rapid deployment (SURD) bioprostheses in bicuspid aortic valves (BAV) are controversial. The aim of this study is to report the outcomes of patients undergoing aortic valve replacement (AVR) for BAV from the Sutureless and Rapid-Deployment Aortic Valve Replacement International Registry (SURD-IR).
Methods
Of the 4,636 patients who received primary isolated SURD-AVR between 2007 and 2018, 191 (4.1%) BAV patients underwent AVR with SURD valve.
Results
Overall 30-day mortality was 1.6%. The Intuity valve was implanted in 53.9% of cases, whereas the Perceval was implanted in 46.1%. Rate of stroke for isolated AVR was 4.2%. No case of endocarditis, thromboembolism, myocardial infarction, valve dislocation or structural valve deterioration was reported in the early phase. Rate of pacemaker implantation and moderate-severe aortic regurgitation (AR) were 7.9% and 3.7%, respectively.
Conclusions
BAV is not considered a contraindication for the implantation of SURD valves. However, detailed information of aortic root geometry as well as the knowledge of some technical considerations are mandatory for a good outcome
Seismic-generated unsteady motions in shallow basins and channels. Part I: Smooth analytical solutions
In this paper time-dependent water motions generated by seismic-type horizontal excitation in shallow basins and channels are modelled by the two-dimensional depth-averaged shallow water equations in which a specific source term is added in order to include an earthquake-induced forcing effect. Sinusoidal excitation is considered as a first approximation, and the response of shallow basins and channels to this simple external forcing is characterized. The nondimensional form of the governing equations shows that the Strouhal number and a ratio representing the amplitude of the forcing acceleration are the influential dimensionless parameters. Novel exact solutions of sinusoidally-forced smooth waves in a prismatic tank, a rectangular open channel, and a parabolic basin are presented. In the first two cases, a sway motion occurs, and reflections take place at the side walls. In the last case, the water sloshes back and forth flowing up the sloping sides of the basin; the free surface remains planar and a moving circular shoreline is present. These analytical solutions provide useful standards for assessing the accuracy of the numerical models used to solve the two-dimensional shallow water equations with source terms
Comparison between experimental and numerical results of 2D flows due to levee-breaking
Results of a laboratory investigation about the 2D flow field induced by a levee-break are compared with numerical results. A lateral breach is instantaneously opened in a tilting flume 10 m long subject to a constant discharge. This causes the inundation of an initially planar 2D dry surface.
Measurements of water levels are made at various places around the breach, whereas the 2D velocity field is detected by means of ten acoustic transducers. Total discharge outflowing from the breach is also measured under stationary conditions.
The same test conditions were numerically simulated using a mathematical model based on the 2D shallow water equations and solved by means of the well known McCormack finite difference scheme. Artificial dissipation terms have been introduced in order to avoid non-physical shocks and oscillations around discontinuities, whilst retaining the second order accuracy of the original scheme.
Comparison with experimental data confirms that the model can be reliably used to describe 2D flows that could occur in nature due to dam or levee-breaking
- âŠ