Study of Corrosion Potential Measurements as a Means to Monitor the Storage and Stabalization Processes of archaeological Copper Artefacts

Archaeological copper artefacts recovered from wet saline environments are often stored in tap water and stabilized in sodium sesquicarbonate solutions. Modification of the natural patina and development of active corrosion can occur during these processes. This implies that monitoring of storage/stabilisation processes is necessary. The focus of the study consists of examining how corrosion potential (Ecorr) measurements can contribute in providing information on the effectiveness of storage and stabilisation treatments. This paper reports on the Ecorr versus time plots of artificially prepared copper coupons (covered or not with corrosion layers) immersed in tap water and a sodium sesquicarbonate solution. Synchrotron radiation XRD was performed in parallel to understand the reactions that take place during the immersion processes

Aggregation and aging in silica gel

Aggregation and aging of silica gels, prepared by controlled addition of water glass to hydrochloric acid, and the transformation of an aged gel to a crystalline phase have been studied in-situ using high-brilliance synchrotron radiation. Small angle X-ray scattering (SAXS) has proved to be very informative in readily detecting transformations in the silica gels which can be described using the concepts of mass and surface fractality. The interpretation of SAXS spectra of aged silica gels has been accompanied by computer simulations of aggregation and aging based on a model for the aging mechanism and the calculation of the corresponding structure-factor patterns. Comparison with experimental spectra of aged silica highlights the important role of particle growth on the fractal dimension. Gel transformations during the transition from an amorphous gel to the crystalline phase of silicalite have been successfully monitored, in-situ, both for heterogeneous and for homogeneous preparations, using the combination of small and wide angle X-ray scattering (SAXS-WAXS

X-Ray synchronotron study of phase transforms in illite clays to extract information on sigillata manufacturing processes.

The technique of sigillata really began in central Italy during the first century B. C. with the development of red vitrified slips obtained through vitrification of a clay preparation. These ceramics, usually decorated with raised motifs and standardised shapes, quickly took over as semi luxury crockery. Given this success, this technique quickly extended to the entire Italian peninsula and then to the Mediterranean coast. From the very start of our era, great centres of production were set up in the south of Gaul. The aspect of sigillata comes from the nature and the texture of its slip. Studies have shown that sigillata slips of quality were obtained from a non calcareous clay while the local calcareous clay was used for the bodies. During firing the slips are vitrified and get a specific microstructure containing hematite and nanometric corundum crystals [1]. An investigation of the clays surrounding La Graufesenque site started and it seems that only the Trias levels are chemically compatible with the composition of antique slips. Apart from the in depth study of the mineralogical nature of these clays realized at a geological Laboratory, we have studied the structural transformations as a function of temperature of two of these clays, chosen for the quality of vitrification in the firing temperature range of sigillata [1030-1080°C]. The main difference between the chemical composition of these two clays is the amount of Mg (2.4 % and 4.5 % in oxide weight). Time-resolved measurements were made at Daresbury (station 2.3) up to 1100oC in oxidizing conditions. An abrupt increase of the hematite cell was observed around 850°C. Above 1000°C, the hematite peaks get sharper which indicate an increase of coherence length (Fig. 1). A spinel phase with cell parameter close to MgAl2O3 was detected from this temperature. As for the hematite, its coherence length increases with the temperature but also during the beginning of the cooling. For the clay sample with the smaller amount of Mg, a corundum phase with very small coherence length was detected above 1000°C. Slips were prepared from the last clay by modern potters and firing at 1050°C in oxidizing atmosphere. A mineral quantitative analysis performed using the Rietveld method revealed that the amount of spinel phase is very high while the corundum contributes to a small part of crystal phases. It is the inverse in the antique slip where the amount of Mg in oxide weight is around 1%. It is clear that the amount of Mg plays a key role in the corundum/spinel competition and that the present slips contain too much Mg. Two questions arise: (i) As the Trias levels are quite heterogeneous is it possible to find clay with less Mg? and (ii) Did the gallo-roman potters eliminated a great part of Mg during the slip preparation process? We discuss the merits of these two alternative hypotheses

Combined prompt gamma activation and neutron diffraction analyses of historic metal objects and limestone samples

Two non-destructive neutron techniques have been used for the analysis of archaeological objects, among them English monumental brass plates, Dutch tin-lead spoons, a Roman leaded bronze fibula and several limestone samples. Prompt Gamma Activation Analysis (PGAA) is a non-destructive method for determination of the major and trace element compositions of various archaeological materials. Time-Of-Flight Neutron Diffraction (TOF-ND), on the other hand, is a non-invasive diagnostic tool for obtaining structural information from ceramic and metal objects. The element information (PGAA) holds the key information for addressing questions of provenance and authentication, whereas the structure information (TOF-ND) addresses questions of ancient materials and making techniques. Here we present data from those two complementary neutron methods, applied to different types of materials and artefacts, in order to highlight commonalities and differences

Discarding IVF embryos: reporting on global practices

Purpose: To provide a global scale report on a representative sample of the clinical embryology community depicting the practice of discarding supernumerary IVF embryos. Methods: A web-based questionnaire titled “Anonymous questionnaire on embryo disposal practices” was designed in order to ensure anonymous participation of practicing clinical embryologists around the world. Results: During a data collection period of 8 months, 703 filled-in questionnaires from 65 countries were acquired. According to the data acquired, the majority of practitioners, dispose of embryos by placing them directly in a trash can strictly dedicated for embryo disposal for both fresh and frozen cycles (39% and 36.7% respectively). Moreover, 66.4% of practitioners discard the embryos separately—case by case—at different time points during the day. Over half of embryologists (54%) wait until day 6 to discard the surplus embryos, while 65.5% do not implement a specially allocated incubator space as a designated waiting area prior to disposal. The majority of 63.1% reported that this is a witnessed procedure. The vast majority of embryologists (93%) do not employ different protocols for different groups of patients. Nonetheless, 17.8% reported the request to perform a ceremony for these embryos. Assessing the embryologists’ perspective, 59.5% of participants stated that the embryology practice would benefit from a universally accepted and practiced protocol. Conclusion(s): This study uniquely provides insight into global embryo disposal practices and trends. Results highlight the divergence between reported practices, while indicating the significance on standardization of practice, with embryologists acknowledging the need for a universally accepted protocol implementation

The role of thyroid hormone nuclear receptors in the heart: evidence from pharmacological approaches

This review evaluates the hypothesis that the cardiac effects of amiodarone can be explained—at least partly—by the induction of a local ‘hypothyroid-like condition’ in the heart. Evidence supporting the hypothesis comprises the observation that amiodarone exerts an inhibitory effect on the binding of T3 to thyroid hormone receptors (TR) alpha-1 and beta-1 in vitro, and on the expression of particular T3-dependent genes in vivo. In the heart, amiodarone decreases heart rate and alpha myosin heavy chain expression (mediated via TR alpha-1), and increases sarcoplasmic reticulum calcium-activated ATPase and beta myosin heavy chain expression (mediated via TR beta-1). Recent data show a significant similarity in expression profiles of 8,435 genes in the heart of hypothyroid and amiodarone-treated animals, although similarities do not always exist in transcripts of ion channel genes. Induction of a hypothyroid cardiac phenotype by amiodarone may be advantageous by decreasing energy demands and increasing energy availability