32,698 research outputs found
FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models
Research in micro-forming leads to the investigation of the effects of heat generation in the workpiece and temperature changes in the tools during the forming. The results reported in this paper relate to the study of cold micro-forming processes which are usually ignored on its thermal characteristics. Two closed-die upsetting models were used for the simulation of the forming of micro-parts in single forming trial and in mass production (multi-cycle loading), respectively. An elastic-plastic finite element simulation was performed for a single forming trial. The heat transferred to the die, computed from the simulation, was then used as an input for the multi-cycle heat loading analysis in the die. Two materials: silver and low carbon steel, were used as the work material. The results show that the die saturation temperature could still go up to 100 °C for small size dies, which is significant for the forming of micro-parts. Forming errors due to the die-temperature changes were further computed, which forms a basis for developing considerations on the forming-error compensation. Using the same methods and procedures, forming of a micro-pin via forward extrusion was analysed
Unselective regrowth of 1.5-ÎŒm InGaAsP multiple-quantum-well distributed-feedback buried heterostructure lasers
Unselective regrowth for fabricating 1.5-ÎŒm InGaAsP multiple-quantum well (MQW) distributed-feedback (DFB) buried heterostructure (BH) lasers is developed. The experimental results exhibit superior characteristics, such as a low threshold of 8.5mA, high slope efficiency of 0.55mWâmA, circular-like far-field patterns, the narrow linewidth of 2.5MHz, etc. The high performance of the devices effectively proves the feasibility of the new method to fabricate buried heterostructure lasers
Recommended from our members
Thermodynamic analysis of a novel fossil-fuelâfree energy storage system with a trans-critical carbon dioxide cycle and heat pump
This paper presents and analyzes a novel fossil-fuelâfree trans-critical energy storage system that uses CO2 as the working fluid in a closed loop shuttled between two saline aquifers or caverns at different depths: one a low-pressure reservoir and the other a high-pressure reservoir. Thermal energy storage and a heat pump are adopted to eliminate the need for external natural gas for heating the CO2 entering the energy recovery turbines. We carefully analyze the energy storage and recovery processes to reveal the actual efficiency of the system. We also highlight thermodynamic and sensitivity analyses of the performance of this fossil-fuelâfree trans-critical energy storage system based on a steady-state mathematical method. It is found that the fossil-fuelâfree trans-critical CO2 energy storage system has good comprehensive thermodynamic performance. The exergy efficiency, round-trip efficiency, and energy storage efficiency are 67.89%, 66%, and 58.41%, and the energy generated of per unit storage volume is 2.12 kW·h/m3, and the main contribution to exergy destruction is the turbine reheater, from which we can quantify how performance can be improved. Moreover, with a higher energy storage and recovery pressure and lower pressure in the low-pressure reservoir, this novel system shows promising performance
Robust Hâ feedback control for uncertain stochastic delayed genetic regulatory networks with additive and multiplicative noise
The official published version can found at the link below.Noises are ubiquitous in genetic regulatory networks (GRNs). Gene regulation is inherently a stochastic process because of intrinsic and extrinsic noises that cause kinetic parameter variations and basal rate disturbance. Time delays are usually inevitable due to different biochemical reactions in such GRNs. In this paper, a delayed stochastic model with additive and multiplicative noises is utilized to describe stochastic GRNs. A feedback gene controller design scheme is proposed to guarantee that the GRN is mean-square asymptotically stable with noise attenuation, where the structure of the controllers can be specified according to engineering requirements. By applying control theory and mathematical tools, the analytical solution to the control design problem is given, which helps to provide some insight into synthetic biology and systems biology. The control scheme is employed in a three-gene network to illustrate the applicability and usefulness of the design.This work was funded by Royal Society of the U.K.; Foundation for the Author of National Excellent Doctoral Dissertation of China. Grant Number: 2007E4; Heilongjiang Outstanding Youth Science Fund of China. Grant Number: JC200809; Fok Ying Tung Education Foundation. Grant Number: 111064; International Science and Technology Cooperation Project of China. Grant Number: 2009DFA32050; University of Science and Technology of China Graduate Innovative Foundation
Challenges for modeling carbon emissions of high-rise public residential buildings in Hong Kong
The approach of low or zero carbon building (L/ZCB) has attracted increasing attention in both academic and professional fields as the carbon emissions attributable to buildings kept increasing in the past decades. However, there exist challenges with modeling the carbon emissions of high-rise buildings in high-density urban environments. The aim of this paper is to examine the challenges and develop strategies for modeling carbon emissions in high-rise public residential buildings within the context of Hong Kong. The paper first reviews the challenges facing the modeling of the carbon emissions of high-rise buildings both generally and in Hong Kong, and examines their relevant implications for building design decision making. The approaches to establishing reference building models, e.g. example, real and theoretical reference building, are investigated drawing on the regulatory and practical guidance for carbon emission modeling in Hong Kong. The paper then develops a simulation approach to analyzing the obstacles to building energy modeling for typical high-rise public residential buildings in Hong Kong. Considering the urban environmental factors that may contribute to biased results for energy simulation, this paper is focused on the technical issues during the conversion of data from BIM model to energy simulation software. Thermal zones and user behavior are also addressed since technical and subjective assumptions could lead the simulation to a wrong direction. Understanding of such challenges enables the energy simulation to perform smoothly and also informs carbon emission modeling for high-rise L/ZCBs in other urban settings.published_or_final_versio
- âŠ