Evaluation of two homogenization techniques for modeling the elastic behavior of granular materials

International audienceThis paper discusses the capabilities of two homogenization techniques to accurately represent the elastic behavior of granular materials considered as assemblies of randomly distributed particles. The stress-strain relationship for the assembly is determined by integrating the behavior of the interparticle contacts in all orientations, using two different homogenization methods, namely the kinematic method and the static method. The numerical predictions obtained by these two homogenization techniques are compared to results obtained during experimental studies on different granular materials. Relations between elastic constants of the assembly, interparticle properties, and fabric parameters are discussed, as well as the capabilities of the models to take into account inherent and stress-induced anisotropy for different stress conditions

Elastic model for partially saturated granular materials

International audienceThis paper presents the development of an elastic model for partially saturated granular materials based on micromechanical factor consideration. A granular material is considered as an assembly of particles. The stress-strain relationship for an assembly can be determined by integrating the behavior at all interparticle contacts and by using a static hypothesis, which relates the average stress of the granular assembly to a mean field of particle contact forces. As for the nonsaturated state, capillary forces at grain contacts are added to the contact forces created by an external load. These are then calculated as a function of the degree of saturation, depending on the grain size distribution and on the void ratio of the granular assembly. Hypothesizing a Hertz-Mindlin law for the grain contacts leads to an elastic nonlinear behavior of the particulate material. The prediction of the stress-strain model is compared to experimental results obtained from several different granular materials in dry, partially saturated and fully saturated states. The numerical predictions demonstrate that the model is capable of taking into account the influence of key parameters, such as degree of saturation, void ratio, and mean stress

A microstructural elastoplastic model for unsaturated granular materials

International audienceThe homogenization technique is used to obtain an elastoplastic stress-strain relationship for dry, saturated and unsaturated granular materials. Deformation of a representative volume of material is generated by mobilizing particle contacts in all orientations. In this way, the stress-strain relationship can be derived as an average of the mobilization behavior of these local contact planes. The local behavior is assumed to follow a Hertz-Mindlin's elastic law and a Mohr-Coulomb's plastic law. For the non-saturated state, capillary forces at the grain contacts are added to the contact forces created by an external load. They are calculated as a function of the degree of saturation, depending on the grain size distribution and on the void ratio of the granular assembly. Numerical simulations show that the model is capable of reproducing the major trends of a partially saturated granular assembly under various stress and water content conditions. The model predictions are compared to experimental results on saturated and unsaturated samples of silty sands under undrained triaxial loading condition. This comparison shows that the model is able to account for the influence of capillary forces on the stress-strain response of the granular materials and therefore, to reproduce the overall mechanical behavior of unsaturated granular materials

Model for Granular Materials with Surface Energy Forces

International audienceIn light of environmental differences (such as gravitational fields, surface temperatures, atmospheric pressures, etc.), the mechanical behavior of the subsurface soil on the Moon is expected to be different from that on the Earth. Before any construction on the Moon can be envisaged, a proper understanding of soil properties and its mechanical behavior in these different environmental conditions is essential. This paper investigates the possible effect of surface-energy forces on the shear strength of lunar soil. All materials, with or without a net surface charge, exhibit surface-energy forces, which act at a very short range. Although, these forces are negligible for usual sand or silty sand on Earth, they may be important for surface activated particles under extremely low lunar atmospheric pressure. This paper describes a constitutive modeling method for granular material considering particle level interactions. Comparisons of numerical simulations and experimental results on Hostun sand show that the model can accurately reproduce the overall mechanical behavior of soils under terrestrial conditions. The model is then extended to include surface-energy forces between particles in order to describe the possible behavior of lunar soil under extremely low atmospheric pressure conditions. Under these conditions, the model shows that soil has an increase of shear strength due to the effect of surface-energy forces. The magnitude of increased shear strength is in reasonable agreement with the observations of lunar soil made on the Moon's surface

An elasto-plastic model for granular materials with microstructural consideration

AbstractIn this paper, we have extended the granular mechanics approach to derive an elasto-plastic stress–strain relationship. The deformation of a representative volume of the material is generated by mobilizing particle contacts in all orientations. Thus, the stress–strain relationship can be derived as an average of the mobilization behavior of these local contact planes. The local behavior is assumed to follow a Hertz–Mindlin’s elastic law and a Mohr–Coulomb’s plastic law. Essential features such as continuous displacement field, inter-particle stiffness, and fabric tensor are discussed. The predictions of the derived stress–strain model are compared to experimental results for sand under both drained and undrained triaxial loading conditions. The comparisons demonstrate the ability of this model to reproduce accurately the overall mechanical behavior of granular media and to account for the influence of key parameters such as void ratio and mean stress. A part of this paper is devoted to the study of anisotropic specimens loaded in different directions, which shows the model capability of considering the influence of inherent anisotropy on the stress–strain response under a drained triaxial loading condition

A multiscale approach for investigating the effect of microstructural instability on global failure in granular materials

202310 bcchAccepted ManuscriptOthersNational Natural Science Foundation of China; China Scholarship CouncilPublishe

Multi-scale modeling of grouted sand behavior

International audienceThe mechanical properties of sand: stiffness, cohesion and, to a less extent, friction angle can be increased through the process of grouting. A constitutive model adapted for cohesive-frictional materials from a homogenization technique which allowed us to integrate constitutive relations at the grain level has been developed to obtain constitutive equations for the equivalent continuous granular medium. A representative volume was obtained by mobilizing particle contacts in all orientations. Thus, the stress-strain relationship could be derived as an average of the behavior of these local contact planes. The local behavior was assumed to obey a stress-dependent elastic law and Mohr-Coulomb's plastic law. The influence of the cement grout was modeled by means of adhesive forces between grains in contact, which were added to the contact forces created by an external load. The intensity of these adhesive forces is a function of nature and amount of grout present inside the material and can be reduced due to a damage mechanism at the grain contact during loading. In this paper, we present several examples of simulation which show that the model can reproduce with sufficient accuracy the mechanical improvement induced by grouting as well as the damage of the grain cementation during loading.

Micromechanical modelling for effect of inherent anisotropy on cyclic behaviour of sand

AbstractThe inherent anisotropy more or less exists in sand when preparing samples in laboratory or taking from field. The purpose of this paper is to model cyclic behaviour of sand by means of a micromechanical approach considering inherent anisotropy. The micromechanical stress–strain model developed in an earlier study by Chang and Hicher (2005) is enhanced to account for the stress reversal on a contact plane and the density state-dependent dilatancy. The enhanced model is first examined by simulating typical drained and undrained cyclic tests in conventional triaxial conditions. The model is then used to simulate drained cyclic triaxial tests under constant p′ on Toyoura sand with different initial void ratios and different levels of p′, and undrained triaxial tests on dense and loose Nevada sand. The applicability of the present model is evaluated through comparisons between the predicted and the measured results. The evolution of local stresses and local strains at inter-particle planes due to externally applied load are discussed. All simulations have demonstrated that the proposed micromechanical approach is capable of modelling the cyclic behaviour of sand with inherent and induced anisotropy