Stable retrograde orbits around the triple system 2001 SN263

The NEA 2001 SN263 is the target of the ASTER MISSION - First Brazilian Deep Space Mission. Araujo et al. (2012), characterized the stable regions around the components of the triple system for the planar and prograde cases. Knowing that the retrograde orbits are expected to be more stable, here we present a complementary study. We now considered particles orbiting the components of the system, in the internal and external regions, with relative inclinations between $90^{\circ}< I \leqslant180^{\circ}$, i.e., particles with retrograde orbits. Our goal is to characterize the stable regions of the system for retrograde orbits, and then detach a preferred region to place the space probe. For a space mission, the most interesting regions would be those that are unstable for the prograde cases, but stable for the retrograde cases. Such configuration provide a stable region to place the mission probe with a relative retrograde orbit, and, at the same time, guarantees a region free of debris since they are expected to have prograde orbits. We found that in fact the internal and external stable regions significantly increase when compared to the prograde case. For particles with $e=0$ and $I=180^{\circ}$, we found that nearly the whole region around Alpha and Beta remain stable. We then identified three internal regions and one external region that are very interesting to place the space probe. We present the stable regions found for the retrograde case and a discussion on those preferred regions. We also discuss the effects of resonances of the particles with Beta and Gamma, and the role of the Kozai mechanism in this scenario. These results help us understand and characterize the stability of the triple system 2001 SN263 when retrograde orbits are considered, and provide important parameters to the design of the ASTER mission.Comment: 11 pages, 8 figures. Accepted for publication in MNRAS - 2015 March 1

Acrocarpus fraxinifolius Wight & Arn.

Seminário realizado em Curitiba, de 6 a 8 de outubro de 1998

Collision and Stable Regions around Bodies with Simple Geometric Shape

We show the expressions of the gravitational potential of homogeneous bodies with well-defined simple geometric shapes to study the phase space of trajectories around these bodies. The potentials of the rectangular and triangular plates are presented. With these expressions we study the phase space of trajectories of a point of mass around the plates, using the Poincaré surface of section technique. We determined the location and the size of the stable and collision regions in the phase space, and the identification of some resonances. This work is the first and an important step for others studies, considering 3D bodies. The study of the behavior of a point of mass orbiting around these plates (2D), near their corners, can be used as a parameter to understand the influence of the gravitational potential when the particle is close to an irregular surface, such as large craters and ridges

High coercivity induced by mechanical milling in cobalt ferrite powders

In this work we report a study of the magnetic behavior of ferrimagnetic oxide CoFe2O4 treated by mechanical milling with different grinding balls. The cobalt ferrite nanoparticles were prepared using a simple hydrothermal method and annealed at 500oC. The non-milled sample presented coercivity of about 1.9 kOe, saturation magnetization of 69.5 emu/g, and a remanence ratio of 0.42. After milling, two samples attained coercivity of 4.2 and 4.1 kOe, and saturation magnetization of 67.0 and 71.4 emu/g respectively. The remanence ratio MR/MS for these samples increase to 0.49 and 0.51, respectively. To investigate the influence of the microstructure on the magnetic behavior of these samples, we used X-ray powder diffraction (XPD), transmission electron microscopy (TEM), and vibrating sample magnetometry (VSM). The XPD analysis by the Williamson-Hall plot was used to estimate the average crystallite size and strain induced by mechanical milling in the samples

Increasing Competitiveness through the Implementation of Lean Management in Healthcare

The main aim of this paper was two-fold: first, to design a participative methodology that facilitates lean management implementation in healthcare by adopting the action research approach; second, to illustrate the usefulness of this methodology by applying it to the sleep unit of a public hospital in Spain. This methodology proposes the implementation of lean management in its broadest sense: adopting both lean principles and some of its practical tools or practices in order to achieve competitive advantage. The complete service value chain was considered when introducing changes through lean management implementation. This implementation involved training and involving staff in the project (personnel pillar), detecting and analysing "waste" in value chain processes (processes pillar) and establishing control and measurement mechanisms in line with objectives (key performance indicators pillar) and putting in place improvement actions to achieve these objectives. The application of this methodology brought about an improvement in the management of patient flow in terms of effectiveness, efficiency and quality but also an internal transformation towards lean culture

Procedures to select priority areas for payment for ecosystem services programs.

This work was developed in order to contribute to the application of principles of ecosystem ser-vices in decision-making for water resources management. It aims to identify procedures and meth-odologies used for decision-making in order to select priority areas to be included in projects or programs of compensation for ecosystem services. To do so, methods and experiences to select pri-ority areas were sought in the technical and scientific literature; the key steps used in the selection process of priority areas were identified; then a survey of the procedures adopted to each key step was done considering the literature selected; and, finally, the information collected was analyzed and classified. The results we found showed the main objectives, actions and criteria used to select priority areas for compensation for ecosystem services programs or projects. They also indicate the pressing need for these projects or programs to systematize and share their experiences in this are