The role of high growth temperature GaAs spacer layers in 1.3-/spl mu/m In(Ga)As quantum-dot lasers

We investigate the mechanisms by which high growth temperature spacer layers (HGTSLs) reduce the threshold current of 1.3-/spl mu/m emitting multilayer quantum-dot lasers. Measured optical loss and gain spectra are used to characterize samples that are nominally identical except for the HGTSL. We find that the use of the HGTSL leads to the internal optical mode loss being reduced from 15 /spl plusmn/ 2 to 3.5 /spl plusmn/ 2 cm/sup -1/, better defined absorption features, and more absorption at the ground state resulting from reduced inhomogenous broadening and a greater dot density. These characteristics, together with a reduced defect density, lead to greater modal gain at a given current density

Growth and characterisation of InAsP/AlGaInP QD laser structures

We present a study of metalorganic vapour phase epitaxy of ternary InAsP quantum dots on AlGaInP/GaAs. The properties of InAsP QD laser structures were compared with reference samples containing binary InP QDs. Based on X-ray diffraction, the molar fraction of As in InAsP QDs was estimated to be ~25%. Room temperature liquid contact electro-luminescence measurements revealed a long wavelength shift of the InAsP QD emission to ~775 nm as compared with the InP QD emission at 716 nm and an increased full width at half maximum of the spontaneous emission (71 meV vs 50 meV). As cleaved, 4 mm long and 50 μm wide InAsP QD lasers operated in a pulsed regime at room temperature at ~770 nm with a threshold current density of 155 A/cm2 and a maximum output optical power of at least ~200 mW. The maximum operation temperature was at least 380 K

Nonlinear optics and saturation behavior of quantum dot samples under continuous wave driving

The nonlinear optical response of self-assembled quantum dots is relevant to the application of quantum dot based devices in nonlinear optics, all-optical switching, slow light and self-organization. Theoretical investigations are based on numerical simulations of a spatially and spectrally resolved rate equation model, which takes into account the strong coupling of the quantum dots to the carrier reservoir created by the wetting layer states. The complex dielectric susceptibility of the ground state is obtained. The saturation is shown to follow a behavior in between the one for a dominantly homogeneously and inhomogeneously broadened medium. Approaches to extract the nonlinear refractive index change by fringe shifts in a cavity or self-lensing are discussed. Experimental work on saturation characteristic of InGa/GaAs quantum dots close to the telecommunication O-band (1.24-1.28 mm) and of InAlAs/GaAlAs quantum dots at 780 nm is described and the first demonstration of the cw saturation of absorption in room temperature quantum dot samples is discussed in detail

Manufacturing‐tolerant compact red‐emitting laser diode designs for next generation applications

Quantum well laser diodes with low far-field divergence remain a requirement for many applications such as optical interconnects and data networks, pump sources and next generation holographic red–green–blue displays requiring compact, high power, visible light sources with high spatial and spectral coherence. Many designs exist, but the structure must be easy to grow reproducibly, which has commercial advantages. The authors' low far-field divergence design widens the vertical mode in such a way as to decrease the far-field divergence without significantly reducing the confinement factor, thus keeping threshold current lower. In this study, the authors calculate the sensitivity of their design, which has high refractive index mode expansion layers inserted in the cladding, to unintentional variations in layer thickness and composition during growth. They obtain consistency in measured far-fields for three wafers grown over an interval of a year, with a full-width-half-maximum vertical far-field divergence of 17° for a narrow design (Design A) and just under 13° for a very narrow design (Design B). They have demonstrated a useful, reproducible design, adding to the range of versatile semiconductor lasers available for every application

Control of polarization and dipole moment in low-dimensional semiconductor nanostructures

We demonstrate the control of polarization and dipole moment in semiconductor nanostructures, through nanoscale engineering of shape and composition. Rodlike nanostructures, elongated along the growth direction, are obtained by molecular beam epitaxial growth. By varying the aspect ratio and compositional contrast between the rod and the surrounding matrix, we rotate the polarization of the dominant interband transition from transverse-electric to transverse-magnetic, and modify the dipole moment producing a radical change in the voltage dependence of absorption spectra. This opens the way to the optimization of quantum dot amplifiers and electro-optical modulators. © 2009 American Institute of Physics

Dipole orientation in a Quantum Rod

Field-dependent photo-current measurements in Quantum Rod systems show that the orientation of the permanent dipole moment of a standard GaAs/InAs quantum dot can be reversed by fabricating high-aspect ratio Quantum Rod systems. ©2008 IEEE