Intruder mobility in a vibrated granular packing

We study experimentally the dynamics of a dense intruder sinking under gravity inside a vibrated 2D granular packing. The surrounding flow patterns are characterized and the falling trajectories are interpreted in terms of an effectivive friction coefficient related to the intruder mean descent velocity (flow rules). At higher confining pressures i.e. close to jamming, a transition to intermittent dynamics is evidenced and displays anomalous "on-off" blockade statistics. A systematic analysis of the flow rules, obtained for different intruder sizes, either in the flowing regime or averaged over the flowing and blockade regimes, strongly suggest the existence of non-local properties for the vibrated packing rheology.

Mobility and Diffusion of a Tagged Particle in a Driven Colloidal Suspension

We study numerically the influence of density and strain rate on the diffusion and mobility of a single tagged particle in a sheared colloidal suspension. We determine independently the time-dependent velocity autocorrelation functions and, through a novel method, the response functions with respect to a small force. While both the diffusion coefficient and the mobility depend on the strain rate the latter exhibits a rather weak dependency. Somewhat surprisingly, we find that the initial decay of response and correlation functions coincide, allowing for an interpretation in terms of an 'effective temperature'. Such a phenomenological effective temperature recovers the Einstein relation in nonequilibrium. We show that our data is well described by two expansions to lowest order in the strain rate.Comment: submitted to EP

Forced motion of a probe particle near the colloidal glass transition

We use confocal microscopy to study the motion of a magnetic bead in a dense colloidal suspension, near the colloidal glass transition volume fraction $\phi_g$. For dense liquid-like samples near $\phi_g$, below a threshold force the magnetic bead exhibits only localized caged motion. Above this force, the bead is pulled with a fluctuating velocity. The relationship between force and velocity becomes increasingly nonlinear as $\phi_g$ is approached. The threshold force and nonlinear drag force vary strongly with the volume fraction, while the velocity fluctuations do not change near the transition.Comment: 7 pages, 4 figures revised version, accepted for publication in Europhysics Letter

Particle dynamics in colloidal suspensions above and below the glass-liquid re-entrance transition

We study colloidal particle dynamics of a model glass system using confocal and fluorescence microscopy as the sample evolves from a hard-sphere glass to a liquid with attractive interparticle interactions. The transition from hard-sphere glass to attractive liquid is induced by short-range depletion forces. The development of liquid-like structure is indicated by particle dynamics. We identify particles which exhibit substantial motional events and characterize the transition using the properties of these motional events. As samples enter the attractive liquid region, particle speed during these motional events increases by about one order of magnitude, and the particles move more cooperatively. Interestingly, colloidal particles in the attractive liquid phase do not exhibit significantly larger displacements than particles in the hard-sphere glass

Space-time Phase Transitions in Driven Kinetically Constrained Lattice Models

Kinetically constrained models (KCMs) have been used to study and understand the origin of glassy dynamics. Despite having trivial thermodynamic properties, their dynamics slows down dramatically at low temperatures while displaying dynamical heterogeneity as seen in glass forming supercooled liquids. This dynamics has its origin in an ergodic-nonergodic first-order phase transition between phases of distinct dynamical "activity". This is a "space-time" transition as it corresponds to a singular change in ensembles of trajectories of the dynamics rather than ensembles of configurations. Here we extend these ideas to driven glassy systems by considering KCMs driven into non-equilibrium steady states through non-conservative forces. By classifying trajectories through their entropy production we prove that driven KCMs also display an analogous first-order space-time transition between dynamical phases of finite and vanishing entropy production. We also discuss how trajectories with rare values of entropy production can be realized as typical trajectories of a mapped system with modified forces

The Physics of the Colloidal Glass Transition

As one increases the concentration of a colloidal suspension, the system exhibits a dramatic increase in viscosity. Structurally, the system resembles a liquid, yet motions within the suspension are slow enough that it can be considered essentially frozen. This kinetic arrest is the colloidal glass transition. For several decades, colloids have served as a valuable model system for understanding the glass transition in molecular systems. The spatial and temporal scales involved allow these systems to be studied by a wide variety of experimental techniques. The focus of this review is the current state of understanding of the colloidal glass transition. A brief introduction is given to important experimental techniques used to study the glass transition in colloids. We describe features of colloidal systems near and in glassy states, including tremendous increases in viscosity and relaxation times, dynamical heterogeneity, and ageing, among others. We also compare and contrast the glass transition in colloids to that in molecular liquids. Other glassy systems are briefly discussed, as well as recently developed synthesis techniques that will keep these systems rich with interesting physics for years to come.Comment: 56 pages, 18 figures, Revie

Quantitative imaging of concentrated suspensions under flow

We review recent advances in imaging the flow of concentrated suspensions, focussing on the use of confocal microscopy to obtain time-resolved information on the single-particle level in these systems. After motivating the need for quantitative (confocal) imaging in suspension rheology, we briefly describe the particles, sample environments, microscopy tools and analysis algorithms needed to perform this kind of experiments. The second part of the review focusses on microscopic aspects of the flow of concentrated model hard-sphere-like suspensions, and the relation to non-linear rheological phenomena such as yielding, shear localization, wall slip and shear-induced ordering. Both Brownian and non-Brownian systems will be described. We show how quantitative imaging can improve our understanding of the connection between microscopic dynamics and bulk flow.Comment: Review on imaging hard-sphere suspensions, incl summary of methodology. Submitted for special volume 'High Solid Dispersions' ed. M. Cloitre, Vol. xx of 'Advances and Polymer Science' (Springer, Berlin, 2009); 22 pages, 16 fig

Pressure behaviour of dielectric permittivity on approaching the near-critical consolute point

Results are presented of studies on dielectric permittivity (ε) for the isothermal pressure (P) path of approaching the near-critical consolute point in 1-nitropropane–hexadecane solution. The pretransitional anomaly is well portrayed by the relation isomorphic to that applied in temperature (T) studies under atmospheric pressure. However, the $\varepsilon(P)$ anomaly is much larger, with almost negligible influence of correction-to-scaling terms and the low-frequency Maxwell-Wagner dispersion (even for $f = 1\;{\rm kHz}$), than it was observed in temperature studies at atmospheric pressure. This makes possible a reliable estimation of a critical exponent $\phi = 1 - \alpha \approx 0.88$ which accounts for the critical anomaly. Discrepancies between the $\varepsilon(P)$ and the $\varepsilon(T)$ behaviour may be associated with different positions of isothermal pressure and isobaric temperature paths of approaching the critical consolute point

Lowering The Overall Charge On TMPyP4 Improves Its Selectivity For G-Quadruplex DNA

Ligands that stabilize non-canonical DNA structures called G-quadruplexes (GQs) might have applications in medicine as anti-cancer agents, due to the involvement of GQ DNA in a variety of cancer-related biological processes. Five derivatives of 5,10,15,20–tetrakis(N-methyl-4-pyridyl)porphyrin (TMPyP4), where a N-methylpyridyl group was replaced with phenyl (4P3), 4-aminophenyl (PN3M), 4-phenylamidoproline (PL3M), or 4-carboxyphenyl (PC3M and P2C2M) were investigated for their interactions with human telomeric DNA (Tel22) using fluorescence resonance energy transfer (FRET) assay, and UV-visible and circular dichroism spectroscopies in K+ buffer. The molecules are cationic or zwitterionic with an overall charge of 3+ (4P3, PN3M, and PL3M), 2+ (PC3M) or neutral (P2C2M). All porphyrins except P2C2M stabilize human telomeric DNA in FRET assays by ∼20 °C at 5 eq CD melting experiments suggest that 4P3 is the most stabilizing ligand with a stabilization temperature of 16.8 °C at 4 eq. Importantly, 4P3, PC3M and PL3M demonstrate excellent selectivity for quadruplexes, far superior to that of TMPyP4. Binding constants, determined using UV-vis titrations, correlate with charge: triply cationic 4P3, PN3M and PL3M display Ka of 5–9 μM−1, doubly cationic PC3M displays Ka of 1 μM−1, and neutral P2C2M displays weak-to-no binding. UV-vis data suggest that binding interactions are driven by electrostatic attractions and that the binding mode may be base-stacking (or end-stacking) judging by the high values of red shift (15–20 nm) and hypochromicity (40–50%). We conclude that lowering the charge on TMPyP4 to 3+ can achieve the desired balance between stabilizing ability, affinity, and high selectivity required for an excellent quadruplex ligand