242 research outputs found
Cavity-enhanced photoionization of an ultracold rubidium beam for application in focused ion beams
A two-step photoionization strategy of an ultracold rubidium beam for
application in a focused ion beam instrument is analyzed and implemented. In
this strategy the atomic beam is partly selected with an aperture after which
the transmitted atoms are ionized in the overlap of a tightly cylindrically
focused excitation laser beam and an ionization laser beam whose power is
enhanced in a build-up cavity. The advantage of this strategy, as compared to
without the use of a build-up cavity, is that higher ionization degrees can be
reached at higher currents. Optical Bloch equations including the
photoionization process are used to calculate what ionization degree and
ionization position distribution can be reached. Furthermore, the ionization
strategy is tested on an ultracold beam of Rb atoms. The beam current is
measured as a function of the excitation and ionization laser beam intensity
and the selection aperture size. Although details are different, the global
trends of the measurements agree well with the calculation. With a selection
aperture diameter of 52 m, a current of pA is
measured, which according to calculations is 63% of the current equivalent of
the transmitted atomic flux. Taking into account the ionization degree the ion
beam peak reduced brightness is estimated at A/(msreV).Comment: 13 pages, 9 figure
Direct magneto-optical compression of an effusive atomic beam for high-resolution focused ion beam application
An atomic rubidium beam formed in a 70 mm long two-dimensional
magneto-optical trap (2D MOT), directly loaded from a collimated Knudsen
source, is analyzed using laser-induced fluorescence. The longitudinal velocity
distribution, the transverse temperature and the flux of the atomic beam are
reported. The equivalent transverse reduced brightness of an ion beam with
similar properties as the atomic beam is calculated because the beam is
developed to be photoionized and applied in a focused ion beam. In a single
two-dimensional magneto-optical trapping step an equivalent transverse reduced
brightness of A/(m sr eV) was
achieved with a beam flux equivalent to nA. The
temperature of the beam is further reduced with an optical molasses after the
2D MOT. This increased the equivalent brightness to A/(m sr eV). For currents below 10 pA, for which disorder-induced
heating can be suppressed, this number is also a good estimate of the ion beam
brightness that can be expected. Such an ion beam brightness would be a six
times improvement over the liquid metal ion source and could improve the
resolution in focused ion beam nanofabrication.Comment: 10 pages, 8 figures, 1 tabl
Measurement of the temperature of an ultracold ion source using time-dependent electric fields
We report on a measurement of the characteristic temperature of an ultracold
rubidium ion source, in which a cloud of laser-cooled atoms is converted to
ions by photo-ionization. Extracted ion pulses are focused on a detector with a
pulsed-field technique. The resulting experimental spot sizes are compared to
particle-tracking simulations, from which a source temperature
mK and the corresponding transversal reduced emittance m rad are determined. We find that this result is
likely limited by space charge forces even though the average number of ions
per bunch is 0.022.Comment: 8 pages, 11 figure
Theory and particle tracking simulations of a resonant radiofrequency deflection cavity in TM mode for ultrafast electron microscopy
We present a theoretical description of resonant radiofrequency (RF)
deflecting cavities in TM mode as dynamic optical elements for
ultrafast electron microscopy. We first derive the optical transfer matrix of
an ideal pillbox cavity and use a Courant-Snyder formalism to calculate the 6D
phase space propagation of a Gaussian electron distribution through the cavity.
We derive closed, analytic expressions for the increase in transverse emittance
and energy spread of the electron distribution. We demonstrate that for the
special case of a beam focused in the center of the cavity, the low emittance
and low energy spread of a high quality beam can be maintained, which allows
high-repetition rate, ultrafast electron microscopy with 100 fs temporal
resolution combined with the atomic resolution of a high-end TEM. This is
confirmed by charged particle tracking simulations using a realistic cavity
geometry, including fringe fields at the cavity entrance and exit apertures
COVID-19-associated immune thrombocytopenia
Thrombocytopenia is a risk factor for increased morbidity and mortality in patients with the new severe acute respiratory syndrome corona virus, SARS-CoV-2 infection (COVID-19 infection).1 Thrombocytopenia in COVID-19 patients may be caused by disseminated intravascular coagulation (DIC), sepsis or drug-induced. Recently a single case report suggested immune thrombocytopenia (ITP) may be associated with COVID-19 infection.2 ITP is a rare autoimmune disease characterized by a platelet count < 100x109/L, leading to an increased bleeding risk.3 Several risk factors have been described for ITP including environmental (e.g. infection, malignancy and drugs) and genetic predisposition.4 We report here the first case series of three patients with ITP associated with COVID-19 infection
Performance predictions for a laser intensified thermal beam for use in high resolution Focused Ion Beam instruments
Photo-ionization of a laser-cooled and compressed atomic beam from a
high-flux thermal source can be used to create a high-brightness ion beam for
use in Focus Ion Beam (FIB) instruments. Here we show using calculations and
Doppler cooling simulations that an atomic rubidium beam with a brightness of
at a current of 1 nA can be created using a
compact 5 cm long 2D magneto-optical compressor which is more than an order of
magnitude better than the current state of the art Liquid Metal Ion Source.Comment: 8 pages, 7 figures submitted to: Phys. Rev.
Performance predictions of a focused ion beam from a laser cooled and compressed atomic beam
Focused ion beams are indispensable tools in the semiconductor industry
because of their ability to image and modify structures at the nanometer length
scale. Here we report on performance predictions of a new type of focused ion
beam based on photo-ionization of a laser cooled and compressed atomic beam.
Particle tracing simulations are performed to investigate the effects of
disorder-induced heating after ionization in a large electric field. They lead
to a constraint on this electric field strength which is used as input for an
analytical model which predicts the minimum attainable spot size as a function
of amongst others the flux density of the atomic beam, the temperature of this
beam and the total current. At low currents (I<10 pA) the spot size will be
limited by a combination of spherical aberration and brightness, while at
higher currents this is a combination of chromatic aberration and brightness.
It is expected that a nanometer size spot is possible at a current of 1 pA. The
analytical model was verified with particle tracing simulations of a complete
focused ion beam setup. A genetic algorithm was used to find the optimum
acceleration electric field as a function of the current. At low currents the
result agrees well with the analytical model while at higher currents the spot
sizes found are even lower due to effects that are not taken into account in
the analytical model
Genetic partitioning of interleukin-6 signalling in mice dissociates Stat3 from Smad3-mediated lung fibrosis
Idiopathic pulmonary fibrosis (IPF) is a fatal disease that is unresponsive to current therapies and characterized by excessive collagen deposition and subsequent fibrosis. While inflammatory cytokines, including interleukin (IL)-6, are elevated in IPF, the molecular mechanisms that underlie this disease are incompletely understood, although the development of fibrosis is believed to depend on canonical transforming growth factor (TGF)-beta signalling. We examined bleomycin-induced inflammation and fibrosis in mice carrying a mutation in the shared IL-6 family receptor gp130. Using genetic complementation, we directly correlate the extent of IL-6-mediated, excessive Stat3 activity with inflammatory infiltrates in the lung and the severity of fibrosis in corresponding gp130757F mice. The extent of fibrosis was attenuated in B lymphocyte-deficient gp130757F;mu MT-/- compound mutant mice, but fibrosis still occurred in their Smad3-/- counterparts consistent with the capacity of excessive Stat3 activity to induce collagen 1a1 gene transcription independently of canonical TGF-beta/Smad3 signalling. These findings are of therapeutic relevance, since we confirmed abundant STAT3 activation in fibrotic lungs from IPF patients and showed that genetic reduction of Stat3 protected mice from bleomycin-induced lung fibrosis
Molecular analysis of axonal-intrinsic and glial-associated co-regulation of axon degeneration
- …