175,522 research outputs found
Prospect for relic neutrino searches
Unlike the relic photons, relic neutrinos have not so far been observed. The
Cosmic Neutrino Background (CB) is the oldest relic from the Big Bang,
produced a few seconds after the Bang itself. Due to their impact in cosmology,
relic neutrinos may be revealed indireclty in the near future through
cosmological observations. In this talk we concentrate on other proposals, made
in the last 30 years, to try to detect the CB directly, either in
laboratory searches (through tiny accelerations they produce on macroscopic
targets) or through astrophysical observations (looking for absorption dips in
the flux of Ultra-High Energy neutrinos, due to the annihilation of these
neutrinos with relic neutrinos at the Z-resonance). We concentrate mainly on
the first of these two possibilities.Comment: Talk given at the Nobel Symposium on Neutrino Physics, Enkoping,
Sweden, Augus 19-24, 2004; 16 page
Near-planar TS waves and longitudinal vortices in channel flow: Nonlinear interaction and focusing
The nonlinear interaction between planar or near-planar Tollmien-Schlichting waves and longitudinal vortices, induced or input, is considered theoretically for channel flows at high Reynolds numbers. Several kinds of nonlinear interaction, dependent on the input amplitudes and wavenumbers or on previously occurring interactions, are found and inter-related. The first, Type 1, is studied the most here and it usually produces spanwise focusing of both the wave and the vortex motion, within a finite scaled time, along with enhancement of both their amplitudes. This then points to the nonlinear interaction Type 2 where new interactive effects come into force to drive the wave and the vortex nonlinearly. Types 3, 4 correspond to still higher amplitudes, with 3 being related to 2, while 4 is connected with a larger-scale interaction 5 studied in an allied paper. Both 3, 4 are subsets of the full three-dimensional triple-deck-lie interaction, 6. The strongest nonlinear interactions are those of 4, 5, 6 since they alter the mean-flow profile substantially, i.e., by an 0(1) relative amount. All the types of nonlinear interaction however can result in the formation of focussed responses in the sense of spanwise concentrations and/or amplifications of vorticity and wave amplitude
Nonlinear Tollmien-Schlichting/vortex interaction in boundary layers
The nonlinear reaction between two oblique 3-D Tollmein-Schlichting (TS) waves and their induced streamwise-vortex flow is considered theoretically for an imcompressible boundary layer. The same theory applies to the destabilization of an incident vortex motion by subharmonic TS waves, followed by interaction. The scales and flow structure involved are addressed for high Reynolds numbers. The nonlionear interaction is powerful, starting at quite low amplitudes with a triple-deck structure for the TS waves but a large-scale structure for the induced vortex, after which strong nonlinear amplification occurs. This includes nonparallel-flow effects. The nonlinear interaction is governed by a partial differential system for the vortex flow coupled with an ordinary-differential one for the TS pressure. The solution properties found sometimes produce a breakup within a finite distance and sometimes further downstream, depending on the input amplitudes upstream and on the wave angles, and that then leads to the second stages of interaction associated with higher amplitudes, the main second stages giving either long-scale phenomena significantly affected by nonparallelism or shorter quasi-parallel ones governed by the full nonlinear triple-deck response
The nonlinear interaction of Tollmien-Schlichting waves and Taylor-Goertler vortices in curved channel flows
It is known that a viscous fluid flow with curved streamlines can support both Tollmien-Schlichting and Taylor-Goertler instabilities. In a situation where both modes are possible on the basis of linear theory a nonlinear theory must be used to determine the effect of the interaction of the instabilities. The details of this interaction are of practical importance because of its possible catastrophic effects on mechanisms used for laminar flow control. This interaction is studied in the context of fully developed flows in curved channels. A part form technical differences associated with boundary layer growth the structures of the instabilities in this flow are very similar to those in the practically more important external boundary layer situation. The interaction is shown to have two distinct phases depending on the size of the disturbances. At very low amplitudes two oblique Tollmein-Schlichting waves interact with a Goertler vortex in such a manner that the amplitudes become infinite at a finite time. This type of interaction is described by ordinary differential amplitude equations with quadratic nonlinearities
Wolf-Rayets in IC10: Probing the Nearest Starburst
IC10 is the nearest starburst galaxy, as revealed both by its Halpha surface
brightness and the large number of Wolf-Rayet stars (WRs) per unit area. The
relative number of known WC- to WN-type WRs has been thought to be unusually
high (~2), unexpected for IC10's metallicity. In this Letter we report the
first results of a new and deeper survey for WRs in IC10. We sucessfully
detected all of the spectroscopically known WRs, and based upon comparisons
with a neighboring control field, estimate that the total number of WRs in IC10
is about 100. We present spectroscopic confirmation of two of our WR
candidates, both of which are of WN type. Our photometric survey predicts that
the actual WC/WN ratio is ~0.3. This makes the WC/WN ratio of IC 10 consistent
with that expected for its metallicity, but greatly increases the already
unusually high number of WRs, resulting in a surface density that is about 20
times higher than in the LMC. If the majority of these candidates are
spectroscopically confirmed, IC10 must have an exceptional population of high
mass stars.Comment: Accepted by ApJL; only minor correction in this versio
Overview of a new slicing method: Fixed Abrasive Slicing Technique (FAST)
The fixed abrasive slicing technique (FAST) was developed to slice silicon ingots more effectively. It was demonstrated that 25 wafers/cm can be sliced from 10 cm diameter and 19 wafers/cm from 15 cm diameter ingots. This was achieved with a combination of machine development and wire-blade development programs. Correlation was established between cutting effectiveness and high surface speeds. A high speed slicer was designed and fabricated for FAST slicing. Wirepack life of slicing three 10 cm diameter ingots was established. Electroforming techniques were developed to control widths and prolong life of wire-blades. Economic analysis indicates that the projected add-on price of FAST slicing is compatible with the DOE price allocation to meet the 1986 cost goals
Massive molecular outflows at high spatial resolution
We present high-spatial resolution Plateau de Bure Interferometer CO(2-1) and
SiO(2-1) observations of one intermediate-mass and one high-mass star-forming
region. The intermediate-mass region IRAS20293+3952 exhibits four molecular
outflows, one being as collimated as the highly collimated jet-like outflows
observed in low-mass star formation sources. Furthermore, comparing the data
with additional infrared H2 and cm observations we see indications that the
nearby ultracompact HII region triggers a shock wave interacting with the
outflow. The high-mass region IRAS19217+1651 exhibits a bipolar outflow as well
and the region is dominated by the central driving source. Adding two more
sources from the literature, we compare position-velocity diagrams of the
intermediate- to high-mass sources with previous studies in the low-mass
regime. We find similar kinematic signatures, some sources can be explained by
jet-driven outflows whereas other are better constrained by wind-driven models.
The data also allow to estimate accretion rates varying from a few times
10^{-5}Msun/yr for the intermediate-mass sources to a few times 10^{-4}Msun/yr
for the high-mass source, consistent with models explaining star formation of
all masses via accretion processes.Comment: 14 pages text, 4 tables, 8 figures, accepted for Ap
Wire blade development for Fixed Abrasive Slicing Technique (FAST) slicing
A low cost, effective slicing method is essential to make ingot technology viable for photovoltaics in terrestrial applications. The fixed abrasive slicing technique (FAST) combines the advantages of the three commercially developed techniques. In its development stage FAST demonstrated cutting effectiveness of 10 cm and 15 cm diameter workpieces. Wire blade development is still the critical element for commercialization of FAST technology. Both impregnated and electroplated wire blades have been developed; techniques have been developed to fix diamonds only in the cutting edge of the wire. Electroplated wires show the most near term promise and this approach is emphasized. With plated wires it has been possible to control the size and shape of the electroplating, it is expected that this feature reduces kerf and prolongs the life of the wirepack
Discrepancies in Determinations of the Ginzburg-Landau Parameter
Long-standing discrepancies within determinations of the Ginzburg-Landau
parameter from supercritical field measurements on superconducting
microspheres are reexamined. The discrepancy in tin is shown to result from
differing methods of analyses, whereas the discrepancy in indium is a
consequence of significantly differing experimental results. The reanalyses
however confirms the lower determinations to within experimental
uncertainties.Comment: submitted to Phys. Rev.
CHANDRA Observations of the X-ray Halo around the Crab Nebula
Two Chandra observations have been used to search for thermal X-ray emission
from within and around the Crab Nebula. Dead-time was minimized by excluding
the brightest part of the Nebula from the field of view. A dust-scattered halo
comprising 5% of the strength of the Crab is clearly detected with surface
brightness measured out to a radial distance of 18 arcminutes. Coverage is 100%
at 4 arcminutes, 50% at 12 arcminutes, and 25% at 18 arcminutes. The observed
halo is compared with predictions based on 3 different interstellar grain
models and one can be adjusted to fit the observation. This dust halo and
mirror scattering form a high background region which has been searched for
emission from shock-heated material in an outer shell. We find no evidence for
such emission. We can set upper limits a factor of 10-1000 less than the
surface brightness observed from outer shells around similar remnants. The
upper limit for X-ray luminosity of an outer shell is about 10e34 erg/s.
Although it is possible to reconcile our observation with an 8-13 solar mass
progenitor, we argue that this is unlikely.Comment: 26 pages, 12 figures, accepted by Ap
- …