131 research outputs found
Theory of selective excitation in Stimulated Raman Scattering
A semiclassical model is used to investigate the possibility of selectively
exciting one of two closely spaced, uncoupled Raman transitions. The duration
of the intense pump pulse that creates the Raman coherence is shorter than the
vibrational period of a molecule (impulsive regime of interaction). Pulse
shapes are found that provide either enhancement or suppression of particular
vibrational excitations.Comment: RevTeX4,10 pages, 5 figures, submitted to Phys.Rev.
Parametric Erosion Investigation: Propellant Adiabatic Flame Temperature
The influence of quasi-independent parameters and their potential influence on erosion in guns have been investigated. Specifically, the effects of flame temperature and the effect of assuming that the Lewis number (ratio of mass-to-heat transport to the surface), Le = 1, has been examined. The adiabatic flame temperature for a propellant was reduced by the addition of a diluent from a high temperature of 3843 K (similar to that of M9) down to 3004 K, which is near the value for M30A1 propellant. Mass fractions of critical species at the surface with and without the assumption of Le = 1 are presented, demonstrating that certain species preferentially reach the surface providing varied conditions for the surface reactions. The results for gun tube bore surface regression qualitatively agree with previous studies and with current experimental data
Coherent control using adaptive learning algorithms
We have constructed an automated learning apparatus to control quantum
systems. By directing intense shaped ultrafast laser pulses into a variety of
samples and using a measurement of the system as a feedback signal, we are able
to reshape the laser pulses to direct the system into a desired state. The
feedback signal is the input to an adaptive learning algorithm. This algorithm
programs a computer-controlled, acousto-optic modulator pulse shaper. The
learning algorithm generates new shaped laser pulses based on the success of
previous pulses in achieving a predetermined goal.Comment: 19 pages (including 14 figures), REVTeX 3.1, updated conten
An optically driven quantum dot quantum computer
We propose a quantum computer structure based on coupled asymmetric
single-electron quantum dots. Adjacent dots are strongly coupled by means of
electric dipole-dipole interactions enabling rapid computation rates. Further,
the asymmetric structures can be tailored for a long coherence time. The result
maximizes the number of computation cycles prior to loss of coherence.Comment: 4 figure
Controlling the shape of a quantum wavefunction
The ability to control the shape and motion of quantum states(1,2) may lead to methods for bond-selective chemistry and novel quantum technologies, such as quantum computing. The classical coherence of laser light has been used to guide quantum systems into desired target states through interfering pathways(3-5). These experiments used the control of target properties-such as fluorescence from a dye solution(6), the current in a semiconductor(7,8) 8 Or the dissociation fraction of an excited molecule(9)-to infer control over the quantum state. Here we report a direct approach to coherent quantum control that allows us to actively manipulate the shape of an atomic electron's radial wavefunction, We use a computer-controlled laser to excite a coherent state in atomic caesium. The shape of the wavefunction is then measured(10) and the information fed back into the laser control system, which reprograms the optical field. The process is iterated until the measured shape of the wavefunction matches that of a target wavepacket, established at the start of the experiment. We find that, using a variation of quantum holography(11) to reconstruct the measured wavefunction, the quantum state can be reshaped to match the target within two iterations of the feedback loop.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/62625/1/397233a0.pd
Quantum phase retrieval of a Rydberg wave packet using a half-cycle pulse
A terahertz half-cycle pulse was used to retrieve information stored as
quantum phase in an -state Rydberg atom data register. The register was
prepared as a wave packet with one state phase-reversed from the others (the
"marked bit"). A half-cycle pulse then drove a significant portion of the
electron probability into the flipped state via multimode interference.Comment: accepted by PR
Quantum Holographic Encoding in a Two-dimensional Electron Gas
The advent of bottom-up atomic manipulation heralded a new horizon for
attainable information density, as it allowed a bit of information to be
represented by a single atom. The discrete spacing between atoms in condensed
matter has thus set a rigid limit on the maximum possible information density.
While modern technologies are still far from this scale, all theoretical
downscaling of devices terminates at this spatial limit. Here, however, we
break this barrier with electronic quantum encoding scaled to subatomic
densities. We use atomic manipulation to first construct open
nanostructures--"molecular holograms"--which in turn concentrate information
into a medium free of lattice constraints: the quantum states of a
two-dimensional degenerate Fermi gas of electrons. The information embedded in
the holograms is transcoded at even smaller length scales into an atomically
uniform area of a copper surface, where it is densely projected into both two
spatial degrees of freedom and a third holographic dimension mapped to energy.
In analogy to optical volume holography, this requires precise amplitude and
phase engineering of electron wavefunctions to assemble pages of information
volumetrically. This data is read out by mapping the energy-resolved electron
density of states with a scanning tunnelling microscope. As the projection and
readout are both extremely near-field, and because we use native quantum states
rather than an external beam, we are not limited by lensing or collimation and
can create electronically projected objects with features as small as ~0.3 nm.
These techniques reach unprecedented densities exceeding 20 bits/nm2 and place
tens of bits into a single fermionic state.Comment: Published online 25 January 2009 in Nature Nanotechnology; 12 page
manuscript (including 4 figures) + 2 page supplement (including 1 figure);
supplementary movie available at http://mota.stanford.ed
Recommended from our members
Supporting technologies for a long-pulse spallation source
This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project is directed toward the development of the technologies required for a long-pulse, spallation neutron source (LPSS). Traditionally, spallation neutron sources have used proton accelerators that provide intense, short ({le} 1{micro}s) pulses of high-energy protons to a spallation target. A LPSS uses a proton pulse with longer time duration ({approx} 1 ms) and offers the possibility of achieving very high spallation neutron fluxes at substantially lower cost. The performance of a LPSS is very dependent on the neutronic performance of the target-moderator system. A detailed study of this performance has been carried out using Monte Carlo simulations. It should be noted that a LPSS is optimally suited to a fully coupled moderator. Neutron production per proton from such a moderator is a factor of five to seven greater than that produce d by moderators used at short pulse sources. The results of these efforts have been published in a series of articles
Momentum state engineering and control in Bose-Einstein condensates
We demonstrate theoretically the use of genetic learning algorithms to
coherently control the dynamics of a Bose-Einstein condensate. We consider
specifically the situation of a condensate in an optical lattice formed by two
counterpropagating laser beams. The frequency detuning between the lasers acts
as a control parameter that can be used to precisely manipulate the condensate
even in the presence of a significant mean-field energy. We illustrate this
procedure in the coherent acceleration of a condensate and in the preparation
of a superposition of prescribed relative phase.Comment: 9 pages incl. 6 PostScript figures (.eps), LaTeX using RevTeX,
submitted to Phys. Rev. A, incl. small modifications, some references adde
- âŠ