24 research outputs found
Novel preparation of controlled porosity particle/fibre loaded scaffolds using a hybrid micro-fluidic and electrohydrodynamic technique.
The purpose of this research was to produce multi-dimensional scaffolds containing biocompatible particles and fibres. To achieve this, two techniques were combined and used: T-Junction microfluidics and electrohydrodynamic (EHD) processing. The former was used to form layers of monodispersed bovine serum albumin (BSA) bubbles, which upon drying formed porous scaffolds. By altering the T-Junction processing parameters, bubbles with different diameters were produced and hence the scaffold porosity could be controlled. EHD processing was used to spray or spin poly(lactic-co-glycolic) (PLGA), polymethysilsesquioxane (PMSQ) and collagen particles/fibres onto the scaffolds during their production and after drying. As a result, multifunctional BSA scaffolds with controlled porosity containing PLGA, PMSQ and collagen particles/fibres were obtained. Product morphology was studied by optical and scanning electron microscopy. These products have potential applications in many advanced biomedical, pharmaceutical and cosmetic fields e.g. bone regeneration, drug delivery, cosmetic cream lathers, facial scrubbing creams etc
The effect of needle tip displacement in co-axial electrohydrodynamic processing
Co-axial electrospraying and electrospinning are versatile electrohydrodynamic (EHD) techniques that can be used to encapsulate a variety of materials in the form of polymeric particles and fibres via a one step process. The successful production of uniform encapsulated products in co-axial EHD (CEHD) processing depends on multiple parameters including solution concentration, applied voltage and needle capillary diameter. Although many studies have been conducted to investigate the effects of these parameters, there has been very limited research on how the axial displacement between the two needle tips affects the final products formed. Hence the purpose of this study was to adjust the positioning of the inner needle such that its tip extends beyond, is level with or resides inside that of the outer needle and to thus determine the most effective arrangement for controlling product size, uniformity and/or yield. Core–shell particles were prepared using two polymers, poly(lactic-co-glycolic)acid (PLGA) as the shell and polymethylsilsesquioxane (PMSQ) as the core and core–shell fibres using PMSQ as the shell and a volatile liquid, perfluorohexane (PFH) as the core. The products formed were analyzed by optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). After analysis, it was concluded that the most effective arrangement for generating both particles and fibres with the optimal combination of size, uniformity and yield was to have the inner needle 2 mm inside the outer needle. This allows for formation of a stable cone–jet and successful encapsulation of the inner liquid within the outer liquid, before the outer stable cone–jet forms. The corresponding collected product diameter and percentage of products in which material was successfully encapsulated were found to be 0.6 ± 0.1 μm and 85 ± 3% respectively for particles and 9 ± 1 μm and 92 ± 2% for fibres
Biomaterials for hollow organ tissue engineering
Tissue engineering is a rapidly advancing field that is likely to transform how medicine is practised in the near future. For hollow organs such as those found in the cardiovascular and respiratory systems or gastrointestinal tract, tissue engineering can provide replacement of the entire organ or provide restoration of function to specific regions. Larger tissue-engineered constructs often require biomaterial-based scaffold structures to provide support and structure for new tissue growth. Consideration must be given to the choice of material and manufacturing process to ensure the de novo tissue closely matches the mechanical and physiological properties of the native tissue. This review will discuss some of the approaches taken to date for fabricating hollow organ scaffolds and the selection of appropriate biomaterials
Sustained antimicrobial activity and reduced toxicity of oxidative biocides through biodegradable microparticles
The spread of antibiotic-resistant pathogens requires new treatments. Small molecule precursor compounds that produce oxidative biocides with well-established antimicrobial properties could provide a range of new therapeutic products to combat resistant infections. The aim of this study was to investigate a novel biomaterials-based approach for the manufacture, targeted delivery and controlled release of a peroxygen donor (sodium percarbonate) combined with an acetyl donor (tetraacetylethylenediamine) to deliver local antimicrobial activity via a dynamic equilibrium mixture of hydrogen peroxide and peracetic acid. Entrapment of the pre-cursor compounds into hierarchically structured degradable microparticles was achieved using an innovative dry manufacturing process involving thermally induced phase separation (TIPS) that circumvented compound decomposition associated with conventional microparticle manufacture. The microparticles provided controlled release of hydrogen peroxide and peracetic acid that led to rapid and sustained killing of multiple drug-resistant organisms (methicillin-resistant Staphylococcus aureus and carbapenem-resistant Escherichia coli) without associated cytotoxicity in vitro nor intracutaneous reactivity in vivo. The results from this study demonstrate for the first time that microparticles loaded with acetyl and peroxygen donors retain their antimicrobial activity whilst eliciting no host toxicity. In doing so, it overcomes the detrimental effects that have prevented oxidative biocides from being used as alternatives to conventional antibiotics
Poly(3-hydroxyoctanoate), a promising new material for cardiac tissue engineering
Cardiac tissue engineering (CTE) is currently a prime focus of research due to an enormous clinical need. In this work, a novel functional material, Poly(3-hydroxyoctanoate), P(3HO), a medium chain length polyhydroxyalkanoate (PHA), produced using bacterial fermentation, was studied as a new potential material for CTE. Engineered constructs with improved mechanical properties, crucial for supporting the organ during new tissue regeneration, and enhanced surface topography, to allow efficient cell adhesion and proliferation, were fabricated. Our results showed that the mechanical properties of the final patches were close to that of cardiac muscle. Biocompatibility of the P(3HO) neat patches, assessed using Neonatal ventricular rat myocytes (NVRM), showed that the polymer was as good as collagen in terms of cell viability, proliferation and adhesion. Enhanced cell adhesion and proliferation properties were observed when porous and fibrous structures were incorporated to the patches. Also, no deleterious effect was observed on the adults cardiomyocytes' contraction when cardiomyocytes were seeded on the P(3HO) patches. Hence, P(3HO) based multifunctional cardiac patches are promising constructs for efficient CTE. This work will provide a positive impact on the development of P(3HO) and other PHAs as a novel new family of biodegradable functional materials with huge potential in a range of different biomedical applications, particularly CTE, leading to further interest and exploitation of these materials
Electrospun Zein/PCL Fibrous Matrices Release Tetracycline in a Controlled Manner, Killing Staphylococcus aureus Both in Biofilms and Ex Vivo on Pig Skin, and are Compatible with Human Skin Cells
Preparation, characterization, and release of amoxicillin from electrospun fibrous wound dressing patches.
PURPOSE: To produce electrospun polymeric fibrous wound dressing patches that can release the antibiotic drug amoxicillin in a controlled manner. METHODS: Poly(D,L-lactide-co-glycolide) acid (PLGA) fibrous dressings with entrapped amoxicillin were produced by electrospinning. The morphology and successful entrapment of amoxicillin in the PLGA fibrous dressings were validated by scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) spectroscopy. The rate of drug release from the dressing patches was measured in various media for a period of 21 days using UV spectroscopy. RESULTS: PLGA fibres entrapping amoxicillin were collected for 300 s and then cut to form square patches with an average weight of 55 mg. Each dressing patch contained ~2 mg of amoxicillin. The mean fibre diameter was 2.2 ± 0.4 μm. The drug release from the PLGA dressings was found to be different for each medium during the 21-day release period with the highest and lowest concentration of drug released observed when the dressings were immersed in simulated body fluid (SBF) and phosphate buffered saline (PBS), respectively. CONCLUSIONS: The release profiles obtained in this study and the well-established biocompatibility of PLGA indicate that the fibre-based patches with entrapped amoxicillin fabricated in this work are very well suited for applications in wound healing and infection control
Management of paranasal sinus osteomas: A comprehensive narrative review of the literature and an up-to-date grading system
Background: Surgical excision represents the unequivocal treatment modality for symptomatic paranasal sinus osteomas. However, the optimal surgical approach and the extent of the surgery, as well as the management stance in the case of an asymptomatic tumor, remain controversial. Methods: The MeSH terms ‘Osteoma’, ‘Nasal Cavity’, and ‘Paranasal Sinuses’ were used to retrieve articles concerning the management of paranasal sinus osteomas that were published in the last 30 years, the vast majority of which comprised case reports of one or two cases. Original articles or large series of more than six cases were prioritized. Results: Our review summarizes previous findings and opinions relevant to the management of symptomatic and asymptomatic paranasal sinus osteomas. The recent shifts in trends of their management are thoroughly discussed. Currently, an extension of the lesion through the anterior frontal sinus wall; an erosion of the posterior wall of the frontal sinus; a far-anterior intraorbital extension; an attachment to the orbital roof beyond the midorbital point; and some patient-specific adverse anatomic variations that may restrict access, are considered strong contraindications to a purely endoscopic approach. On the grounds of this thorough review, a new grading system for frontal and frontoethmoidal osteomas is proposed to allow better conformity to recent advancements and current clinical, research, and educational needs. Conclusion: Over the past 30 years, endoscopic techniques have emerged as the new standard of care for favorably located paranasal sinus osteomas. Nonetheless, open approaches remain indispensable for the management of the more perplexing cases of frontal sinus osteomas. © 2020 Elsevier Inc
Design, construction and performance of a portable handheld electrohydrodynamic multi-needle spray gun for biomedical applications.
Electrohydrodynamic (EHD) processing has attracted substantial interest in the technological and pharmaceutical sectors in recent years. Given the complexity of the process, exploring new ideas for EHD electrospraying and electrospinning delivery is a challenge. In this article, the design, construction and testing of a portable handheld EHD multi-needle device are described to produce multifunctional particles and fibers. Solid and encapsulated polymer particles and fibers were generated in order to study the performance of the device. The intrinsic properties of the feed solution/suspension and the processing conditions were adjusted to ensure robustness of the process and give uniform and reproducible products, with diameters ranging from the sub-micrometer scale to a few micrometers. These products have a broad range of applications in many advanced industrial sectors e.g. drug delivery systems, wound dressing patches, low calorie food products and cosmetics