Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes

A novel bioremediation system to clean up oil contaminated water was developed combining hydrocarbon (HC) degrading bacteria immobilized and polylactic acid (PLA) or polycaprolactone (PCL) membranes prepared by electrospinning. The bioremediation efficiency was tested on crude oil using highly performant HC degrading bacterial strains isolated from marine and soil environments. The membrane morphology, the microbial adhesion and proliferation were evaluated using scanning electron microscopy (SEM). The SEM analysis highlighted that the fibers of the electrospun mats were in nanoscale with a similar diameter size distribution. The electrospun membranes exhibited high oil absorption capacity (q): approximately q = 40 g/g for PLA and q = 20 g/g for PCL. The bacterial strains were able to attach to the PLA and PCL membranes after 48h, reaching high proliferation and biofilm formation within the whole structure in 5 days. The biodegradation efficiency of the bacteria-membrane systems was tested by GC-FID analysis and compared with planktonic cells after 5 and 10 days incubation. The bacterial immobilization is a promoting factor for biodegradation and a new tool to be developed for bioremediation of aquatic systems

Evidence of destabilization of the human thymidylate synthase (hTS) dimeric structure induced by the interface mutation Q62R

In human cells, thymidylate synthase (TS) provides the only source of 2\u2019-deoxythymidyne-5\u2019-monophosphate (dTMP), which is required for DNA biosynthesis. Because of its pivotal role, human TS (hTS) represents a validated target for anticancer chemotherapy. Nonetheless, the efficacy of drugs blocking the hTS active site has limitations due to the onset of resistance in cancer cells, requiring the identification of new strategies to effectively inhibit this enzyme. Human TS works as an obligate homodimer, making the inter-subunit interface an attractive targetable area. Here, we report the design and investigation of a new hTS variant, in which Gln62, located at the dimer interface, has been replaced by arginine in order to destabilize the enzyme quaternary assembly. The hTS Q62R variant has been characterized though kinetic assay, thermal denaturation analysis and X-ray crystallography. Our results provide evidence that hTS Q62R has a reduced melting temperature. The effective destabilization of the TS quaternary structure is also confirmed by structural analysis, showing that the introduced mutation induces a slight aperture of the hTS dimer. The generation of hTS variants having a more accessible interface area can facilitate the screening of interface-targeting molecules, providing key information for the rational design of innovative hTS interface inhibitors

Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds

Petroleum hydrocarbons are still the most threatening environmental pollutants. A promising non invasive and low-cost technology for the treatment of contaminated sites is based on bioremediation by biodegrading microorganism endowed with catabolic ability towards oil and derivatives. New methods are needed to enhance and optimize natural biodegradation, such as the immobilization of hydrocarbons degraders in many types of supports. We developed a scaffold-bacteria bioremediation system to clean up oil contamination based on degradable 3D scaffolds. The polycaprolactone component is biodegradable, produced in the melt, i.e. at low cost and without the use of toxic solvents. The biofilm is made of highly performing HC-degrading bacteria such as the marine hydrocarbonoclastic bacteria (HCB) (1) or solid n-alkane degrading Actinobacteria (2, 3). The bacterial biofilm is observed within the whole structure of scaffold using scanning electron microscopy. The bioremediation efficiency of such systems was tested on crude oil by GC-FID analysis and compared whit planktonic cells. The biofilms formation was a promoting factor for biodegradation showing hydrocarbon removal up to 70% and 15% more in respect to the planktonic cells. Increasing availability of the contaminants and a better interaction between the hydrophobic substrate and the bacterial cells resulted in developing the degradation rate. Biofilm-mediated bioremediation is a new tool to be developed for bioremediation of acquatic system

Use of biochar as filler for biocomposite blown films: Structure-processing-properties relationships

In this work, biocomposite blown films based on poly(butylene adipate-co-terephthalate) (PBAT) as biopolymeric matrix and biochar (BC) as filler were successfully fabricated. The materials were subjected to a film-blowing process after being compounded in a twin-screw extruder. The preliminary investigations conducted on melt-mixed PBAT/BC composites allowed PBAT/BC 5% and PBAT/BC 10% to be identified as the most appropriate formulations to be processed via film blowing. The blown films exhibited mechanical performances adequate for possible application as film for packaging, agricultural, and compost bags. The addition of BC led to an improvement of the elastic modulus, still maintaining high values of deformation. Water contact angle measurements revealed an increase in the hydrophobic behavior of the biocomposite films compared to PBAT. Additionally, accelerated degradative tests monitored by tensile tests and spectroscopic analysis revealed that the filler induced a photo-oxidative resistance on PBAT by delaying the degradation phenomena

Sleep health of young adults in Western Australia and associations with physical and mental health: A population-level cross-sectional study

OBJECTIVES: This article aims to report on the sleep health characteristics of a population-level sample of young Australian adults and examine associations with measures of physical and mental health. METHODS: A cross-sectional study using data from the Raine Study. Data from participants (n = 1234) born into the study (Generation 2) at the 22-year follow-up were used, including data from a self-report questionnaire and polysomnography. RESULTS: The highest prevalence of suboptimal sleep health was seen on measures of sleep duration (30%), onset latency (18%), satisfaction (25%) and regularity (60%). Dissatisfaction with sleep (physical health: =0.08; mental health: =0.34) and impaired daytime alertness (physical health: =0.09; mental health: =0.08) were significantly associated with poorer physical and mental health and inadequate polysomnography-measured sleep duration was associated poorer mental health ( =0.07) (all ps \u3c 0.05). CONCLUSIONS: Satisfaction with sleep and daytime alertness, both of which are assessed via self-report, are essential aspects of sleep health for young adults. IMPLICATIONS FOR PUBLIC HEALTH: Findings could inform public health interventions, including screening guidelines, to improve the sleep health and, in turn, the physical and mental health of young adults in Australia

Charge ordering transition in GdBaCo2O5: evidence of reentrant behavior

We present a detailed study on the charge ordering (CO) transition in GdBaCo2O5 system by combining high resolution synchrotron powder/single crystal diffraction with electron paramagnetic resonance (EPR) experiments as a function of temperature. We found a second order structural phase transition at TCO=247 K (Pmmm to Pmma) associated with the onset of long range CO. At Tmin = 1.2TCO, the EPR linewidth rapidly broadens providing evidence of spin fluctuations due to magnetic interactions between Gd3+ ions and antiferromagnetic couplings of Co2+/Co3+ sublattices. This likely indicates that, analogously to manganites, the long-range antiferromagnetic order in GdBaCo2O5 sets in at TCO. Pair distribution function (PDF) analysis of diffraction data revealed signatures of structural inhomogeneities at low temperature. By comparing the average and local bond valences, we found that above TCO the local structure is consistent with a fully random occupation of Co2+ and Co3+ in a 1:1 ratio and with a complete charge ordering below TCO. Below T = 100 K the charge localization is partially melted at the local scale, suggesting a reentrant behavior of CO. This result is supported by the weakening of superstructure reflections and the temperature evolution of EPR linewidth that is consistent with paramagnetic (PM) reentrant behavior reported in the GdBaCo2O5.5 parent compound.Comment: 30 pages, 10 figure

Iterative Design and Usability Testing of the iMHere System for Managing Chronic Conditions and Disability

A novel mobile health platform, Interactive Mobile Health and Rehabilitation (iMHere), is being developed to support wellness and self-management among people with chronic disabilities. The iMHere system currently includes a smartphone app with six modules for use by persons with disabilities and a web portal for use by medical and rehabilitation professionals or other support personnel. Our initial clinical research applying use of this system provides insight into the feasibility of employing iMHere in the development of self-management skills in young adults (ages 18-40 years) with spina bifida (Dicianno, Fairman, McCue, Parmanto, Yih, et al., 2015). This article is focused on describing the iterative design of the iMHere system including usability testing of both the app modules and clinician portal. Our pilot population of persons with spina bifida fostered the creation of a system appropriate for people with a wide variety of functional abilities and needs. As a result, the system is appropriate for use by persons with various disabilities and chronic conditions, not only spina bifida. In addition, the diversity of professionals and support personnel involved in the care of persons with spina bifida (SB) also enabled the design and implementation of the iMHere system to meet the needs of an interdisciplinary team of providers who treat various conditions. The iMHere system has the potential to foster communication and collaboration among members of an interdisciplinary healthcare team, including individuals with chronic conditions and disabilities, for client-centered approach to support self-management skills.

Deep invariant texture features for water image classification

Detecting potential issues in naturally captured images of water is a challenging task due to visual similarities between clean and polluted water, as well as causes posed by image acquisition with different camera angles and placements. This paper presents novel deep invariant texture features along with a deep network for detecting clean and polluted water images. The proposed method first divides an input image into H, S and V components to extract finer details. For each of the color spaces, the proposed approach generates two directional coherence images based on Eigen value analysis and gradient distribution, which results in enhanced images. Then the proposed method extracts scale invariant gradient orientations based on Gaussian first order derivative filters on different standard deviations to study texture of each smoothed image. To strengthen the above features, we explore the combination of Gabor-wavelet-binary pattern for extracting texture of the input water image. The proposed method integrates merits of aforementioned features and the features extracted by VGG16 deep learning model to obtain a single feature vector. Furthermore, the extracted feature is fed to a gradient boosting decision tree for water image detection. A variety of experimental results on a large dataset containing different types of clean and stagnant water images show that the proposed method outperforms the existing methods in terms of classification rate and accuracy