657 research outputs found
Reflection properties and defect formation in photonic crystals
Cataloged from PDF version of article.We have investigated the surface reflection properties of a layer‐by‐layer photonic crystal. By using a Fabry–Perot resonant cavity analogy along with the reflection‐phase information of the photonic crystal, we predicted defect frequencies of planar defectstructures. Our predictions were in good agreement with the measureddefect frequencies. Our simple model can also predict and explain double defect formation within the photonic band gap
Oblique response of a split-ring-resonator-based left-handed metamaterial slab
Cataloged from PDF version of article.We experimentally studied the transmission response of a one-dimensional rectangle-prism-shaped metamaterial slab for oblique incidence angles. The electrical size of the split-ring resonators was 1 order of magnitude smaller than the operation wavelength similar to 8.5 cm. We demonstrated that the left-handed transmission peak preserved up to an angle of incidence 45 degrees. The angular measurements were performed with respect to two lateral directions. The confirmed insensitivity of split-ring-resonator-based metamaterials to the angle of incidence makes them a good candidate for superlens applications. (C) 2009 Optical Society of Americ
Electrically small split ring resonator antennas
Cataloged from PDF version of article.We studied electrically small resonant antennas composed of split ring resonators (SRR) and monopoles. The antennas considered have the same ring radius, but slightly different geometry. The resonance frequency depends on the geometry of the SRRs. Two SRR antennas are designed. The first one, which operates at 3.62 GHz, is demonstrated theoretically and experimentally. The size of this antenna is 0.095 lambda(0)x0.100 lambda(0) and is low profile at the other dimension. The gain and directivity of the antenna was 2.38 and 5.46, respectively. The corresponding efficiency was 43.6%. The estimated radiation Q (rad Q=23.03) was much larger than the minimum radiation Q (min Q=1.78). The second one is a rather small SRR antenna in which the capacitance between the rings is increased. The size is reduced to 0.074 lambda(0)x0.079 lambda(0). This structure is called serrated SRR (SSRR). Both antennas have similar far-field patterns but the efficiency of the SSRR antenna is less. (c) 2007 American Institute of Physics
Ab initio study of Ru-terminated and Ru-doped armchair graphene nanoribbons
Cataloged from PDF version of article.We investigate the effects of ruthenium (Ru) termination and Ru doping on the electronic properties of armchair
graphene nanoribbons (AGNRs) using first-principles methods. The electronic band structures, geometries,
density of states, binding energies, band gap information, and formation energies of related structures are
calculated. It is well founded that the electronic properties of the investigated AGNRs are highly influenced by
Ru termination and Ru doping. With Ru termination, metallic band structures with quasi-zero-dimensional, onedimensional
and quasi-one-dimensional density of states (DOS) behavior are obtained in addition to dominant
one-dimensional behavior. In contrast to Ru termination, Ru doping introduces small but measurable (12.4 to
89.6 meV) direct or indirect band gaps. These results may present an additional way to produce tunable band
gaps in AGNRs
Metal–semiconductor–metal photodetector on as-deposited TiO2 thin films on sapphire substrate
Cataloged from PDF version of article.TiO2 thin films are prepared on c-plane sapphire substrates by the RF magnetron sputtering method. The performance of the Pt contact metal–semiconductor–metal (MSM) photodetector fabricated on as-deposited films is studied. The dark current density and the responsivity obtained were 1.57 × 10−9 A/cm2 at 5 V bias and 1.73 A/W at 50 V bias, respectively. Breakdown is not observed up to 50 V bias. Rise and fall times for the photocurrent were 7 and 3 s, respectively. Our results show that high quality MSM photodetectors can be fabricated without high temperature and complicated fabrication steps
Photonic magnetic metamaterial basics
Cataloged from PDF version of article.In the present study, we provide a detailed analysis for the study of photonic metamaterials. We demonstrate the polarization and orientation dependent transmission response of split ring resonators at the infrared and visible band. We provided optical measurements only for one case, in which electric component of the incident field was coupled to planar split ring resonator array. We consecutively studied (i) frequency tuning, (ii) effect of resonator density, (iii) shifting magnetic resonance frequency by changing the resonator shape, and (iv) effect of metal loss and plasma frequency. The study provides an overlook for the candidate applications such as the enhancement of power passing through an electrically small hole, negative index metamaterials and optical metamaterial absorbers. (C) 2010 Elsevier B.V. All rights reserved
Optically thin composite resonant absorber at the near-infrared band: a polarization independent and spectrally broadband configuration
Cataloged from PDF version of article.We designed, fabricated, and experimentally characterized thin absorbers utilizing both electrical and magnetic impedance matching at the near-infrared regime. The absorbers consist of four main layers: a metal back plate, dielectric spacer, and two artificial layers. One of the artificial layers provides electrical resonance and the other one provides magnetic resonance yielding a polarization independent broadband perfect absorption. The structure response remains similar for the wide angle of incidence due to the sub-wavelength unit cell size of the constituting artificial layers. The design is useful for applications such as thermal photovoltaics, sensors, and camouflage. (C)2011 Optical Society of Americ
Optimization and tunability of deep subwavelength resonators for metamaterial applications: complete enhanced transmission through a subwavelength aperture
Cataloged from PDF version of article.In the present work, we studied particle candidates for metamaterial applications, especially in terms of their electrical size and resonance strength. The analyzed particles can be easily produced via planar fabrication techniques. The electrical size of multi-split ring resonators, spiral resonators, and multi-spiral resonators are reported as a function of the particle side length and substrate permittivity. The study is continued by demonstrating the scalability of the particles to higher frequencies and the proposition of the optimized particle for antenna, absorber, and superlens applications: a multi-spiral resonator with lambda/30 electrical size operating at 0.810 GHz. We explain a method for tuning the resonance frequency of the multi-split structures. Finally, we demonstrate that by inserting deep subwavelength resonators into periodically arranged subwavelength apertures, complete transmission enhancement can be obtained at the magnetic resonance frequency. (C) 2009 Optical Society of Americ
First-principles calculations of Pd-terminated symmetrical armchair graphene nanoribbons
Cataloged from PDF version of article.The effects of Palladium (Pd) termination on the electronic properties of armchair graphene nanoribbons (AGNRs) were calculated by using ab initio calculations. After a geometric optimization process, the electronic band structures, density of states, and binding energies of AGNRs with N-a = 5-15 were calculated. Pd-termination was found to significantly influence the electronic properties of AGNRs. In DOS, many Q0D and Q1D type states were observed. Binding energy (BE) for single-side or both-side Pd-terminated structures represents characteristic drops with the increasing GNR width. With the increasing GNR width, the BEs of these structures become similar to hydrogenated structures. Because of the GNR width, dependent BE also gave information on the possible stiffness information, in which all of this information can be used in studies where controlled binding to graphene is required. (C) 2012 Elsevier B.V. All rights reserved
A new detection method for capacitive micromachined ultrasonic transducers
Cataloged from PDF version of article.Capacitive micromachined ultrasonic transducers (cMUT) have become an alternative to piezoelectric transducers in the past few years. They consist of many small circular membranes that are connected in parallel. In this work, we report; a new detection method for cMUTs. We model the membranes as capacitors and the interconnections between the membranes as inductors. This kind of LC net-work is called an artificial transmission line. The vibrations of the membranes modulate the electrical length of the transmission line, which is proportional to the frequency of the signal through it. By measuring the electrical length of the artificial line at a high RF frequency (in the gigahertz range), the vibrations of the membranes can be detected in a very sensitive manner. Far the devices we measured, we calculated the minimum detectable displacement to be in the order of 10(-5) Angstrom/root Hz with a possible improvement to 10(-7) Angstrom/root Hz
- …