Electrowetting on conductors: Anatomy of the phenomenon

We have recently reported that reversible electrowetting can be observed on the basal plane of graphite, without the presence of a dielectric layer, in both liquid/air and liquid/liquid configurations. The influence of carbon structure on the wetting phenomenon is investigated in more detail here. Specifically, it is shown that the adsorption of adventitious impurities on the graphite surface markedly suppresses the electrowetting response. Similarly, the use of pyrolysed carbon films, although exhibiting a roughness below the threshold previously identified as the barrier to wetting on basal plane graphite, does not give a noticeable electrowetting response, which leads us to conclude that specific interactions at the water–graphite interface as well as graphite crystallinity are responsible for the reversible response seen in the latter case. Preliminary experiments on mechanically exfoliated and chemical vapour deposition grown graphene are also reported.</p

Photocatalytic Mineralization of Organic Acids over Visible-Light-Driven Au/BiVO 4

Au/BiVO4 visible-light-driven photocatalysts were synthesized by coprecipitation method in the presence of sodium dodecyl benzene sulfonate (SDBS) as a dispersant. Physical characterization of the obtained materials was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), UV-Vis diffuse reflectance spectroscopy (DRS) and Brunauer, and Emmett and Teller (BET) specific surface area measurement. Photocatalytic performances of the as-prepared Au/BiVO4 have also been evaluated via mineralizations of oxalic acid and malonic acid under visible light irradiation. XRD and SEM results indicated that Au/BiVO4 photocatalysts were of almost spherical particles with scheelite-monoclinic phase. Photocatalytic results showed that all Au/BiVO4 samples exhibited higher oxalic acid mineralization rate than that of pure BiVO4, probably due to a decrease of BiVO4 band gap energy and the presence of surface plasmon absorption upon loading BiVO4 with Au as evidenced from UV-Vis DRS results. The nominal Au loading amount of 0.25 mol% provided the highest pseudo-first-order rate constant of 0.0487 min−1 and 0.0082 min−1 for degradations of oxalic acid (C2) and malonic acid (C3), respectively. By considering structures of the two acids, lower pseudo-first-order rate constantly obtained in the case of malonic acid degradation was likely due to an increased complexity of the degradation mechanism of the longer chain acid

A new portable toluidine blue/aptamer complex-on-polyethyleneimine-coated gold nanoparticles-based sensor for label-free electrochemical detection of alpha-fetoprotein

The quantification of alpha-fetoprotein (AFP) as a potential liver cancer biomarker which is generally found in ultratrace level is of significance in biomedical diagnostics. Therefore, it is challenging to find a strategy to fabricate a highly sensitive electrochemical device towards AFP detection through electrode modification for signal generation and amplification. This work shows the construction of a simple, reliable, highly sensitive, and label-free aptasensor based on polyethyleneimine-coated gold nanoparticles (PEI-AuNPs). A disposable ItalSens screen-printed electrode (SPE) is employed for fabricating the sensor by successive modifying with PEI-AuNPs, aptamer, bovine serum albumin (BSA), and toluidine blue (TB), respectively. The AFP assay is easily performed when the electrode is inserted into a small Sensit/Smart potentiostat connected to a smartphone. The readout signal of the aptasensor derives from the electrochemical response of TB intercalating into the aptamer-modified electrode after binding with the target. The decrease in current response of the proposed sensor is proportional to the AFP concentration due to the restriction of the electron transfer pathway of TB by a number of insulating AFP/aptamer complexes on the electrode surface. PEI-AuNPs improve SPE’s reactivity and provide a large surface area for aptamer immobilization whereas aptamer provides selectivity to the target AFP. Consequently, this electrochemical biosensor is highly sensitive and selective for AFP analysis. The developed assay reveals a linear range of detection from 10 to 50000 pg mL−1 with R2 = 0.9977 and provided a limit of detection (LOD) of 9.5 pg mL−1 in human serum. With its simplicity and robustness, it is anticipated that this electrochemical-based aptasensor will be a benefit for the clinical diagnosis of liver cancer and further developed for other biomarkers analysis

Poly(3,4-ethylenedioxythiophene/permethylated β-cyclodextrin) polypseudorotaxane and polyrotaxane: Synthesis, characterization and application as hole transporting materials in perovskite solar cells

International audienceNew phenothiazine derivatives are synthesized and proposed as high performance visible light photoinitiators