Temperature stability of thin film refractory plasmonic materials

Materials such as W, TiN, and SrRuO3 (SRO) have been suggested as promising alternatives to Au and Ag in plasmonic applications owing to their stability at high operational temperatures. However, investigation of the reproducibility of the optical properties after thermal cycling between room and elevated temperatures is so far lacking. Here, thin films of W, Mo, Ti, TiN, TiON, Ag, Au, SrRuO3 and SrNbO3 are investigated to assess their viability for robust refractory plasmonic applications. These results are further compared to the performance of SrMoO3 reported in literature. Films ranging in thickness from 50 to 105 nm are deposited on MgO, SrTiO3 and Si substrates by e-beam evaporation, RF magnetron sputtering and pulsed laser deposition, prior to characterisation by means of AFM, XRD, spectroscopic ellipsometry, and DC resistivity. Measurements are conducted before and after annealing in air at temperatures ranging from 300 to 1000° C for one hour, to establish the maximum cycling temperature and potential longevity at elevated temperatures for each material. It is found that SrRuO3 retains metallic behaviour after annealing at 800° C, while SrNbO3 undergoes a phase transition resulting in a loss of metallic behaviour after annealing at 400° C. Importantly, the optical properties of TiN and TiON are degraded as a result of oxidation and show a loss of metallic behaviour after annealing at 500° C, while the same is not observed in Au until annealing at 600° C. Nevertheless, both TiN and TiON may be better suited than Au or SRO for high temperature applications operating under vacuum conditions

Energy-Momentum Cathodoluminescence Spectroscopy of Dielectric Nanostructures

Precise knowledge of the local density of optical states (LDOS) is fundamental to understanding nanophotonic systems and devices. Complete LDOS mapping requires resolution in energy, momentum, and space, and hence a versatile measurement approach capable of providing simultaneous access to the LDOS components is highly desirable. Here, we explore a modality of cathodoluminescence spectroscopy able to resolve, in single acquisitions, the dispersion in energy and momentum of the radiative LDOS. We perform measurements on a titanium nitride diffraction grating, bulk molybdenum disulfide, and silicon to demonstrate that the technique can probe and disentangle the dispersion of coherent and incoherent cathodoluminescence signals. The approach presented raises cathodoluminescence spectroscopy to a versatile tool for subwavelength design and optimization of nanophotonic devices in the reciprocal space

Tunable, Low Optical Loss Strontium Molybdate Thin Films for Plasmonic Applications

Strontium molybdate (SrMoO3) thin films are grown epitaxially on strontium titanate (SrTiO3), magnesium oxide (MgO), and lanthanum aluminate (LaAlO3) substrates by pulsed laser deposition and possess electrical resistivity as low as 100 µΩ cm at room temperature. SrMoO3 is shown to have optical losses, characterized by the product of the Drude broadening, ΓD, and the square of the plasma frequency, ωpu2, significantly lower than TiN, though generally higher than Au. Also, it is demonstrated that there is a zero-crossover wavelength of the real part of the dielectric permittivity, which is between 600 and 950 nm (2.05 and 1.31 eV), as measured by spectroscopic ellipsometry. Moreover, the epsilon near zero (ENZ) wavelength can be controlled by engineering the residual strain in the films, which arises from a strain dependence of the charge carrier concentration, as confirmed by density of states calculations. The relatively broad tunability of ENZ behavior observed in SrMoO3 demonstrates its potential suitability for transformation optics along with plasmonic applications in the visible to near infrared spectral range

Tunable, Low Optical Loss Strontium Molybdate Thin Films for Plasmonic Applications

Strontium molybdate (SrMoO3) thin films are grown epitaxially on strontium titanate (SrTiO3), magnesium oxide (MgO), and lanthanum aluminate (LaAlO3) substrates by pulsed laser deposition and possess electrical resistivity as low as 100 µΩ cm at room temperature. SrMoO3 is shown to have optical losses, characterized by the product of the Drude broadening, ΓD, and the square of the plasma frequency, ωpu2, significantly lower than TiN, though generally higher than Au. Also, it is demonstrated that there is a zero-crossover wavelength of the real part of the dielectric permittivity, which is between 600 and 950 nm (2.05 and 1.31 eV), as measured by spectroscopic ellipsometry. Moreover, the epsilon near zero (ENZ) wavelength can be controlled by engineering the residual strain in the films, which arises from a strain dependence of the charge carrier concentration, as confirmed by density of states calculations. The relatively broad tunability of ENZ behavior observed in SrMoO3 demonstrates its potential suitability for transformation optics along with plasmonic applications in the visible to near infrared spectral range